The interest in distributed generation has been increasing in recent years, especially due to technical devel- opment on generation systems that meet environmental and energy policy concerns. One of the most impor- tant distributed energy technologies is Combined Cooling, Heat and Power (CCHP) systems. CCHP is a small and self-contained electric, heating and cooling generation plant that can provide power for households, commercial or industrial facilities. It can reduce power loss and enhance service reliability in distribution systems. The proposed method in this paper determines the optimal size and operation of CCHP, auxiliary boiler and also heat storage unit as elements of an energy hub, for users by an integrated view of electricity and natural gas network. Authors apply cost and benefit analysis in the optimization. To confirm the proposed method, the optimum sizes of these elements are determined for a hotel in Tehran as a case study.
KeywordsCombined Cooling Heating And Power (CCHP)Cost And Benefit AnalysisEnergy HubOptimal OperationOptimal Size
M. Rabinowitz, “Power Systems of the Future. I,” IEEE Power Engineering Review, Vol. 20, No. 1, 2000, pp. 5-16. doi:10.1109/39.814649
C. Mitchell, “The Value of Distributed Generation-Policy Implications for the UK,” IEE Colloquium on Economics of Embedded Generation, London, 29 October1998, pp. 1/1-111.
J.-H. Teng, Y.-H. Liu, C.-Y. Chen and C.-F. Chen, “Value-Based Distributed Generator Placements for Service Quality Improvements,” Electrical Power and Energy Systems, Vol. 29, No. 3, 2007, pp. 268-274. doi:10.1016/j.ijepes.2006.07.008
M. Geidl, “Integrated Modeling and Optimization of Multicarrier Energy Systems,” Doctoral and Habilitation Theses, Power Systems Laboratory, ETH, Zurich, 2007
R. Billinton and R. N. Allen, “Reliability Evaluation of Engineering Systems, Concept and Techniques,” 2nd Edition, Plenum Press, New York, 1992.
R. Graham and W. Chow, “Technical and Economic Assessment of Combined Heat and Power Technologiesfor Commercial Customer Applications”, EPRI Project Manager, 2003.
M. Geidl, G. Koeppel, P. Favre-Perrod, B. Klockl, G. Andersson and K. Frohlich, “Energy Hubs for the Futures,” IEEE Power & Energy Magazine, Vol. 5, No. 1, 2007, pp. 24-30.
G. Koepple and G. Anderson, “The Influence of Combined Power, Gas and Thermal Networks on the Reliability of Supply,” The Sixth World Energy System Conference, Torino, 10-12 July 2006, pp. 646-651.
J. Teng, Y. Liu, C. Chen and C.-F. Chen, “Value-Based Distributed Generator Placements for Service Quality Improvements,” International Journal of Electrical Power & Energy Systems, Vol. 29, No. 3, 2007, pp. 268-274. doi:10.1016/j.ijepes.2006.07.008
H. Asano and S. Bando, “Operational Planning Method and Economic Analysis of Microgrid with Intermittent Renewable Energy and Battery Storage,” 29th IAEE International Conference, Potsdam, 7-10 June 2006.
P. M. Costa and M. A. Matos, “Economic Analysis of Microgrids including Reliability Aspect,” Internationl Conference on Probabilistic Methods Applied to Power System, Stockholm, 11-15 June 2006, pp. 1-8.
B. Maurhoff and G. Wood, “Dispersed Generation Reduce Power Costsand Improve Service Reliability,” Rural Electric Power Conference, Louisville, May 2000, pp. C5/1-C5/7.
A. Silvestri, A. Berizzi and S. Buonanno, “Distributed Generation Planning Using Genetic Algorithms,” International Conference on Electric Power Engineering, 1999. PowerTech Budapest 99, Budapest, 29 August-2 September 1999, p. 257.
A. S. Siddiqui, C. Marnay, O. Bailey and K. H. LaCommare, “Optimal Selection Of On-Site Generation with Combined Heat and Power Applications,” International Journal of Distributed Energy Resources, Vol. 1, No. 1, 2005, pp. 33-62.
A. R. Abdelaziz and W. M. Ali, “Dispersed Generation Planning Using a New Evolutionary Approach,” IEEE Bologna Power Tech Conference, Bologna, 23-26 June 2003, p. 5.
J. A. Greatbanks, D. H. Popovic, M. Begovic, A. Pregelj, and T. C. Green, “On Optimization for Security and Reliability of Power Systems with Distributed Generation,” IEEE Bologna Power Tech Conference, Bologna, 23-26 June 2003, p. 8.
H. M. Groscurth, T. Bruckner and R. Kümmel, “Modeling of Energy Service Supply System”, Energy, Vol. 20, No. 9, 1995, pp. 941-958. doi:10.1016/0360-5442(95)00067-Q
I. Bouwmans and K. Hemmes, “Optimising Energy Systems—Hydrogen and Distributed Generation,” 2nd International Symposium on Power System Market Aspects, Stockholm, 2-4 October 2002.
R. H. Lasseter and P. Piagi, “Microgrid: A Conceptual Solution,” IEEE 35th Annual Power Electronics Specialists Conference, Aachen, 20-25 June 2004, pp. 4285-4290.
R. Frik and P. Favre-Perrod, “Proposal for a Multifunctional Energy Bus and Its Interlink with Generation and Consumption,” Diploma Thesis, Power Systems and High Voltage Laboratories, ETH, Zurich, 2004.
M. Geidl, “A Greenfield Approach for Future Power Systems,” Proceedings of Cigre Session 41, Paris, 2006.
J. Kanter, “Europe Considers New Taxes to Promote ‘Clean’ Energy,” The New York Times, 22 June 2010. http://www.nytimes.com/2010/06/23/business/energyenvironment/23carbon.html?_r=2&ref=cap_and_trade
P. Vassilopoulos, “Models for the Identification of Market Power in Wholesale Electricity Markets,” UFR Industrial Organization DEA, Vol. 129, September 2003, pp. 46-47.
D&R, “2009 Buildings Energy Data Book,” D&R International, Ltd., 2009.
Y. J. Ruan, et al., “Optimal Option of Distributed Generation Technologies for Various Commercial Buildings,” Applied Energy, Vol. 86, No. 9, 2009, pp. 1641-1653. doi:10.1016/j.apenergy.2009.01.016
A. K. Basu and S. Chowdhury, “Impact of Strategic Deployment of CHP-Based DERs on Microgrid Reliability,” IEEE Transactions on Power Delivery, Vol. 25, No. 3, 2010, pp. 1609-1705.
H. Cho, “Evaluation of CCHP Systems Performance Based on Operational Cost, Primary Energy Consumption, and Carbon Dioxide Emission by Utilizing an Optimal Operation Scheme,” Applied Energy, Vol. 86, No. 12, 2009, pp. 2540-2549. doi:10.1016/j.apenergy.2009.04.012
ONSITE SYCOM Energy Corporation, “The Market and Technology Potential for Combined Heat and Power in the Industrial Sector,” Washington DC, January 2000.
“2008 ASHRAE Hand-book—HVAC Systems and Equipment,” ASHRAE, 2008.
C. Marnay, et al., “Optimal Technology Selection and Operation of Commercial-Building Microgrids,” IEEE Transactions on Power Systems, Vol. 23, No. 3, 2008, pp. 975-982.