Wind-Solar Hybrid Electrical Power Production to Support National Grid: Case Study - Jordan
- 1
- 2
Abstract
The paper presents the next generation of power energy systems using solar- and wind-energy systems for the country of Jordan. Presently with the oil prices are on the rise, the cost of electrical power production is very high. The opportunity of a large wind and solar hybrid power production is being explored. Sights are chosen to produce electricity using the wind in the Mountains in Northern Jordan and the sun in the Eastern Desert. It is found that the cost of windmill farm to produce 100 - 150 MW is US$290 million while solar power station to produce 100 MW costs US$560 million. The electrical power costs US$0.02/kWh for the wind power and US$0.077 for the solar power. The feasibility for using wind and solar energies is now when the price oil reaches US$ 100.00 per barrel. The paper also discusses different power electronics circuits and control methods to link the renewable energy to the national grid. This paper also looks at some of the modern power electronics converters and electrical generators, which have improved significantly solar and wind energy technologies.
- N. Kodama, T. Matzuzaka, and N. Inomita, “power variation control of a wind turbine using probabilistic optimal control, including feed-forward control for wind speed,” Wind Engineering, Vol. 24, No. 1, pp. 13–23, January 2000.
- L. L. Freris, “Wind energy conversion systems,” Englewood Cliffs, NJ, Prentice-Hall, pp. 182–184, 1990.
- E. Koutroulis and K. Klaitzakis, “Design of a maximum power tracking system for wind-energy-conversion applications,” IEEE Transaction on Industrial Electronics, Vol. 53, No. 2, pp. 486–494, April 2006.
- E. Muljadi and C. P. Butterfield, “Pitch-controlled variable-speed wind turbine generation,” IEEE Transaction on Industry Applications, Vol. 37, No. 1, pp. 240–246, January 2001.
- W. Lin, H. Matsuo, and Y. Ishizuka, “Performance characteristics of buck-boost type two-input DC-DC converter with an active voltage clamp,” IEICE Technique Report, Vol. 102, No. 567, pp. 7–13, January 2003.
- http://www.nepco.com.jo/showImageTC.aspx?imageURL=Statistics_files/Englishalbums/2/, Retrieved on 2/3/2009.
- http://www.ren21.net/iap/commitment2.asp?id=93, Retrieved 3/3/2009.
- The Hashimite Kingdom of Jordan, Meteorological Department, Climate Division, Jordan Climatic Data, 2007.
- E. W. Peterson and J. P. Hennessey Jr., “On the use of power laws for estimates of wind power potential, Journal of Applied Meteorology, Vol. 17, 1978.
- SAIP Electric Group Limited, Huifeng Road, Luishi Industrial Zone, Wenzhou, Zhejiang, 325604, China.
- J. A. Baroudi, V. D. Dinavahi, and A. M. Knight, “A review of power converter topologies for wind generators,” Renewable Energy 32, Science Direct, pp. 229–238, January, 2007.
- Z. Chen and E. Spooner, “Current source thyristor inverter and its active compensation system,” Proceedings of IEE Generation, Transmission, and Distribution, Vol. 150, pp. 447–454, July 2003.
- K. Tan and S. Islam, “Optimum control strategies in energy conversion of PSMG wind turbine system without mechanical sensors,” IEEE Transaction on Energy Conversion, Vol. 10, pp. 392–399, 2004.
- Z. Chen and E. Spooner, “Grid power quality with variable speed wind turbines,” IEEE Transaction on Energy Conversion, Vol. 16, 2001, pp. 148–154.
- Z. Chen and E. Spooner, “Wind turbine power converters: A comparative study,” Proceedings of IEE Seventh International Conference on Power Electronics and Variable Speed Drives, pp. 471–476, September 1998.