Heat Transfer and Energy Utilization of Waste Heat Recovery Device with Different Internal Component
- 1 School of Intelligent Systems Engineering, Sun Yat-sen University, Guangzhou, China
- 2 School of Materials and Engineering, Sun Yat-sen University, Guangzhou, China
- 3 School of Materials and Engineering, Sun Yat-sen University, Guangzhou, China
Abstract
Steel industry is high energy-consuming industry, and its waste heat recovery is critical ly important for energy utilization. In this study, pipeline bundle is used to enhance heat transfer in waste heat recovery device, and associated gas-solid heat transfer and energy utilization performance with different pipeline arrangement, pipe diameter and shape of internal component are further analyzed. The temperatures of gas and particle in device with pipeline bundle periodically fluctuate in horizontal direction, and those in staggered system distribute more uniformly than those in paralleled system. Compared with paralleled device, exergy and waste heat utilization efficiency of staggered device have been improved, and they are both higher tha n those without pipeline. As pipe diameter increases, e xergy and waste heat utilization efficiency first increases and then decreases, and they reach the maxima with optimal pipe diameter. As the width of internal component keeps constant, influence of its shape on heat transfer is very little.
- Jiang, C. (2016) A Research and Simulation of Hybrid Waste Heat Recovery Device of Blast Furnace Slag. Master’s Thesis, University of Science and Technology Liaoning, Tianjin.
- Shigaki, N., Tobo, H., Ozawa, S., Ta, Y. and Hagiwara, K. (2015) Heat Recovery Process from Packed Bed of Hot Slag Plates. ISIJ International, 55, 2258-2265. https://doi.org/10.2355/isijinternational.ISIJINT-2015-169
- Hadley, T.D., Pan, Y., Lim, K.S. and Orellana, L. (2015) Engineering Design of Direct Contact Counter Current Moving Bed Heat Exchangers. International Journal of Mineral Processing, 142, 91-100. https://doi.org/10.1016/j.minpro.2015.04.018
- Zhang, H., Wang, H., Zhu, X., Qiu, Y.J., Li, K., Chen, R. and Liao, Q. (2013) A Review of Waste Heat Recovery Technologies towards Molten Slag in Steel Industry. Applied Energy, 112, 956-966. https://doi.org/10.1016/j.apenergy.2013.02.019
- Liu, J.X., Yu, Q.B, Peng, J., Hu, X. and Duan, W. (2015) Thermal Energy Recovery from High-Temperature Blast Furnace Slag Particles. International Communications in Heat and Mass Transfer, 69, 23-28. https://doi.org/10.1016/j.icheatmasstransfer.2015.10.013
- Liu, J.X., Yu, Q.B., Dou, C.X. and Li, R. (2010) Experimental Study on Heat Transfer Characteristics of Apparatus for Recovering the Waste Heat of Blast Furnace Slag. Advanced Materials Research, 97-101, 2343-2346. https://doi.org/10.4028/www.scientific.net/AMR.97-101.2343
- Liu, J.X., Yu, Q.B. and Peng, J. (2017) Waste Heat Recovery from High-Temperature Blast Furnace Slag Particles. Journal of Scientific & Industrial Research, 76, 187-192. http://nopr.niscair.res.in/handle/123456789/40643
- Zhao, M.R., Du, M.F., Chen S.X. and Zhang, Z.X. (2018) Utilization of Remaining Exergy of Sintering Cooling System Based on Exergy Analysis Method. Iron & Steel, 53, 89-94.
- Chen, L.G., Xia, S.J., Xie, Z.H., Liu, X.W., Shen, X. and Sun, F.R. (2014) Progress in Study on Dynamic Mathematical Modeling of Iron and Steel Metallurgy Processes. Journal of Thermal Science and Technology, 13, 95-125.
- Feng, J.S., Dong, H., Gao, J.Y., Li, H.Z. and Liu, J.X. (2016) Numerical Investigation of Gas-Solid Heat Transfer Process in Vertical Tank for Sinter Waste Heat Recovery. Applied Thermal Engineering, 107, 135-143. https://doi.org/10.1016/j.applthermaleng.2016.06.175
- Feng, J.S., Dong, H., Gao, J.Y., Liu, J.Y. and Liang, K. (2016) Exergy Transfer Characteristics of Gas-Solid Heat Transfer through Sinter Bed Layer in Vertical Tank. Energy, 111, 154-164. https://doi.org/10.1016/j.energy.2016.05.113