State Estimation of Distribution Network Considering Data Compatibility
- 1 School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
- 2 School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
Abstract
Considering that the measurement devices of the distribution network are becoming more and more abundant, on the basis of the traditional Supervisory Control And Data Acquisition (SCADA) measurement system, Phasor measurement unit (PMU) devices are also gradually applied to the distribution network. So when estimating the state of the distribution network, the above two devices need to be used. However, because the data of different measurement systems are different, it is necessary to balance this difference so that the data of different systems can be compatible to achieve the purpose of effective utilization of the estimated power distribution state. To this end, this paper starts with three aspects of data accuracy of the two measurement systems, data time section and data refresh frequency to eliminate the differences between system data, and then considers the actual situation of the three-phase asymmetry of the distribution network. The three-phase state estimation equations are constructed by the branch current method, and finally the state estimation results are solved by the weighted least square method.
- Wang, K., Mu, G. and Chen, X. (2001) Precision Improvement and Pmu Placement Studies on State Estimation of a Hybrid Measurement System with Pmus. Chinese Society for Electrical Engineering, 21, 29-33.
- Van Cutsem, T. and Ribbens-Pavella, M. (1983) Critical Survey of Hierarchical Methods for State Estimation of Electric Power Systems. IEEE Transactions on Power Apparatus and Systems, 102, 3415-3424. https://doi.org/10.1109/TPAS.1983.317838
- Alves, G.O., et al. (2016) Distribution System State Estimation Using Phasor Measurement Units. 10th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Bydgoszcz, 29 June-1 July 2016, 2166-9546.
- Pau, M., Pegoraro, P.A. and Sulis, S. (2013) Efficient Branch-Current-Based Distribution System State Estimation Including Synchronized Measurements. IEEE Transactions on Instrumentation & Measurement, 62, 2419-2429. https://doi.org/10.1109/TIM.2013.2272397
- Liu, J., Ponci, F., Monti, A., Muscas, C., Pegoraro, P.A. and Sulis, S. (2014) Optimal Meter Placement for Robust Measurement Systems in Active Distribution Grids. IEEE Transactions on Instrumentation and Measurement, 63, 1096-1105. https://doi.org/10.1109/TIM.2013.2295657
- Alimardani, A., Therrien, F., Atanackovic, D., Jatskevich, J. and Vaahedi, E. (2015) Distribution System State Estimation Based on Nonsynchronized Smart Meters. IEEE Transactions on Smart Grid, 6, 2919-2928. https://doi.org/10.1109/TSG.2015.2429640
- Gómez-Expósito, A., Gómez-Quiles, C. and Dzafic. I. (2015) State Estimation in Two Time Scales for Smart Distribution Systems. IEEE Transactions on Smart Grid, 6, 421-430. https://doi.org/10.1109/TSG.2014.2335611
- Ni, D., Zhang, W., Yu, B. and Gong, W. (2011) A New Algorithm for Power System State Estimation with PMU Measurements. International Conference on Mechatronic Science, Electric Engineering and Computer, Jilin, 19-22 August 2011, 114-117. https://doi.org/10.1109/MEC.2011.6025413
- Saadabadi, H. and Dehghani, M. (2016) Large-Scale Power Systems State Estimation Using PMU and SCADA Data. 2016 24th Iranian Conference on Electrical Engineering (ICEE), Shiraz, 10-12 May 2016, 906-911. https://doi.org/10.1109/IranianCEE.2016.7585649
- Primadianto, A. and Lu, C. (2017) A Review on Distribution System State Estimation. IEEE Transactions on Power Systems, 32, 3875-3883. https://doi.org/10.1109/TPWRS.2016.2632156
- Li, B. (2013) Research on Dynamic State Estimation of Power System under Mixed Measurement. Ph.D. Thesis, Shanghai Jiaotong University, Shanghai.