The Influence of Gratering, Fermentation and Variety on the Physio-Chemical Quality of Cassava Starch

Abstract

The study was conducted to determine the influence of gratering and fermentation parameters on the physicochemical quality of starch obtained from two cassava varieties in Sierra Leone ( i.e. , SLICASS 11 and SLICASS 6). Fresh cassava roots harvested from the Department of Agricultural Engineering were peeled, washed and grated before fermentation and starch extraction. Fermentation was carried out under separate aerobic and anaerobic conditions for a period of Seven days. Physicochemical analyses were conducted at the Postharvest Food and Bioprocess Engineering Laboratory of the Department of Agricultural and Bio-System Engineering, Njala University to determine the solubility, water absorption capacity and swelling power of starch extracts obtained from various experimental treatments. Fermentation method and duration had significant effects on the solubility, water absorption capacity (WAC) and swelling power (SP) of starch extracts. Maximum solubility and WAC were recorded on the fifth day, for both cassava varieties tested, with apparent significant difference resulting from the two gratering bands ( i.e. , with 1.5-inch nail hole and 4-inch nail hole sizes, respectively). While swelling power increased consistently with temperature for starch obtained from SLICASS-11 variety, an irregular pattern was observed for SLICASS-6 variety. A multiple correlation analysis proposes a significant and weak correlation between temperature, WAC (+0.150) and swelling power (+0.048). Also multiple correlation analyses suggest a significant correlation between fermentation period, the functional properties of starch extracts obtained from both fermentation methods and cassava varieties ( i.e. , solubility (−0.226), water absorption capacity (+0.301) and swelling power (+0.329)).