Coal fly ash is considered an industrial by-product derived from coal combustion in thermal power plant. It is one of the most complex anthropogenic materials. Its improper disposal has become an environmental concern and resulted in a waste of recoverable resources. The aim of this paper is to study the physico-chemical characteristics of binders based on coal fly ash and lime in order to develop an eco-cement. The various characterization tests carried out are X-ray fluorescence, X-ray diffraction, compressive strengths, thermophysical properties and setting time. X-ray fluorescence and X-ray diffraction were used to determine the chemical composition and phases of fly ash, lime and binders. This allowed us to see that the chemical composition of fly ash is similar to that of cement. Compressive strengths of mortars containing 20%, 40%, 60% and 80% of fly ash have shown that fly ash has a long-term positive effect which might be related to a pozzolanic activity. The L 3 binder consisting of 60% of coal fly ash and 40% lime has a higher compressive strength than the others. The binder setting start time is greater than that of cement but shorter than that of lime. The study of the thermophysical properties of the L 3 binder shows that it has a higher thermal resistance than cement mortar. Moreover, it heats up less quickly because of its low effusivity compared to that of the latter. This analysis highlighted the principal characteristics that must be taken into account to use coal fly correctly in lime-based materials.
Hendriks, C., Worrell, E., De Jager, D., Blok, K. and Riemer, P. (1998) Emission Reduction of Greenhouse Gases from the Cement Industry. Proceedings of the 4th International Conference on Greenhouse Gas Control Technologies, Interlaken, 30 August-2 September 1998, 939-944.
Meyer, C. (2009) The Greening of the Concrete Industry. Cement and Concrete Composites, 31, 601-605. https://doi.org/10.1016/j.cemconcomp.2008.12.010
Frohard, F. (2014) Durability of Green Concretes: Impact of Alternative Cementitious Materials on the Corrosion of Steel in Reinforced Concrete. Université Paris-Est, Paris.
Chen, M., Blanc, D., Gautier, M., Mehu, J. and Gourdon, R. (2013) Environmental and Technical Assessments of the Potential Utilization of Sewagesludge Ashes (SSAs) as Secondary Raw Materials in Construction. Waste Management, 33, 1268-1275. https://doi.org/10.1016/j.wasman.2013.01.004
Binici, H., Kapur, S., Arocena, J. and Kaplan, H. (2012) The Sulphate Resistance of Cements Containing Red Brick Dust and Ground Basaltic Pumice with Sub-Microscopic Evidence of Intra-Pore Gypsum and Ettringite as Strengtheners. Cement and Concrete Composites, 34, 279-287. https://doi.org/10.1016/j.cemconcomp.2011.10.001
Hossain, K. (2003) Blended Cement Using Volcanic Ash and Pumice. Cement and Concrete Research, 33, 1601-1605. https://doi.org/10.1016/S0008-8846(03)00127-3
Kabay, N., Tufekci, M., Kizilkanat, A.B. and Oktay, D. (2015) Properties of Concrete with Pumice Powder and Fly Ash as Cement Replacement Materials. Construction and Building Materials, 85, 1-8. https://doi.org/10.1016/j.conbuildmat.2015.03.026
Yao, Z., Ji, X., Sarker, P., Tang, J., Ge, L., Xia, M. and Xi, Y. (2014) A Comprehensive Review on the Applications of Coal Fly Ash. Earth-Science Reviews, 141, 105-121. https://doi.org/10.1016/j.earscirev.2014.11.016
Mohanty, S. and Chugh, Y.P. (2007) Development of Fly Ash-Based Automotive Brake Lining. Tribology International, 40, 1217-1224. https://doi.org/10.1016/j.triboint.2007.01.005
Brotons, F., Garces, P., Paya, J. and Saval, J. (2014) Portland Cement Systems with Addition of Sewage Sludge Ash. Application in Concretes for the Manufacture of Blocks. Journal of Cleaner Production, 82, 112-124. https://doi.org/10.1016/j.jclepro.2014.06.072
Neville, A.M. (2000) Propriétés des betons. Première Edition, Eyrolles, Paris.
American Society for Testing and Materials (2012) ASTM C 618-12: Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Used in Concrete. ASTM International, West Conshohocken.
OECD (Organization for Economic Co-Operation and Development) (2017). http://www.oecd.org/fr/ https://data.oecd.org/fr/
Cyr, M., Coutand, M. and Clastres P. (2007) Technological and Environmental Behaviour of Sewage Sludge Ash (SSA) in Cement-Based Materials. Cement and Concrete Research, 37, 1278-1289. https://doi.org/10.1016/j.cemconres.2007.04.003
Badur, S. and Chaudhary, R. (2008) Utilization of Hazardous Wastes and By-Products as a Green Concrete Material through S/S Process: A Review. Reviews on Advanced Materials Science, 17, 42-61.
Piasta, W. and Lukawska, M. (2016) The Effect of Sewage Sludge Ash on Properties of Cement Composites. Procedia Engineering, 16, 1018-1024. https://doi.org/10.1016/j.proeng.2016.08.842
Quintin, M., Riandey, C. and Kersabiec, A.M. and Pinta, M. (1973) Effets de matrice comparés dans 1’analyse des silicates par spectrométrie d’émission d’absorption atomique et de fluorescence X. Analusis, 2, 516-531.
Traore, A., Ndiaye, P.M., Mbaye, M., Diatta, F. and Wague, A. (2014) X-Ray Fluorescence Combined with Chemometrics for the Characterization of Geological Samples: A Case Study in Southeastern Senegal. Instrumentation Science & Technology, 42, 593-604. https://doi.org/10.1080/10739149.2014.915564
Sall, M., Traoré, A., Wade, A., Gueye, P., Diouf, S., Dieye, G. and Diop, D. (2021) Potential Use of Sewage Sludge Ash in Lime-Based Materials. Advances in Materials, 10, 12-22. https://doi.org/10.11648/j.am.20211002.11
Bal, H., Jannot, Y., Quenette, N., Chenu, A. and Gaye, S. (2012) Water Content Dependance of the Porosity Density and Thermal Capacity of Laterite Based Bricks with Millet Waste Additive. Construction and Building Materials, 31, 144-150. https://doi.org/10.1016/j.conbuildmat.2011.12.063
Neupane, K. (2016) Fly Ash and GGBFS Based Powder-Activated Geopolymer Binders: Aviable Sustainable Alternative of Portland Cement in Concrete Industry. Mechanics of Materials, 103, 110-122. https://doi.org/10.1016/j.mechmat.2016.09.012
Coo, M. and Pheeraphan, T. (2016) Effect of Sand, Fly Ash and Limestone Powder on Preplaced Aggregate Concrete Mechanical Properties and Reinforced Beam Shear Capacity. Construction and Building Materials, 120, 581-592. https://doi.org/10.1016/j.conbuildmat.2016.05.128
American Society for Testing and Materials (2003) ASTM C 618-03: Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. ASTM International, West Conshohocken.
Turk, K. C. and Bagdiken, M. (2017) Use of binary and Ternary Cementitious Blends of F-Class Fly-Ash and Limestone Powder to Mitigate Alkali-Silica Reaction risk. Construction and Building Materials, 151, 422-427. https://doi.org/10.1016/j.conbuildmat.2017.06.075
Zhou, Y.F., Li, J.S., Lu, J.S., Cheeseman, C. and Poon, C. (2020) Sewage Sludge Ash: A Comparative Evaluation with Fly Ash for Potential. Construction and Building Materials, 242, Article ID: 118160. https://doi.org/10.1016/j.conbuildmat.2020.118160
Vamvuka, D. and Kakaras, E. (2011) Ash Properties and Environmental Impact of Various Biomass and Coal Fuelsand Their Blends. Fuel Processing Technology, 92, 570-581. https://doi.org/10.1016/j.fuproc.2010.11.013
Sall, M., Gueye, P.M., Traore, A., Diouf, S., Sy, M., Bouchez, G., Wade, A.C., Sane, M., Dieye, G. and Diop, D. (2020) Assessment of Fine and Coarse Sewage Sludge Ashes for Their Potential Use in Civil Engineering. Journal of Civil, Construction and Environmental Engineering, 5, 84-91. https://doi.org/10.11648/j.jccee.20200504.13
Cyr, M., Klysz, G., Julien, S. and Clastres, P. (2003) Les cendres d’incinération de boues de stations de traitement des eaux polluées sont-elles utilisables dans les matrices cimentaires? Comparaison avec les cendres volantes de charbon. Environnement, Ingénierie & Développement, No. 29, 22-29. https://doi.org/10.4267/dechets-sciences-techniques.2227
Dyer, T., Dhir, R. and Haliday, J. (2011) Hydration Chemistry of Sewage Sludge Ash Used as a Cement Component. Journal of Materials in Civil Engineering, 23, 648-655. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000221
Moro, C., Francioso, V. and Velay-Lizancos, M. (2021) Modification of CO2 Capture and Pore Structure of Hardened Cement Paste Made with Nano-TiO2 Addition: Influence of Water-to-Cement Ratio and CO2 Exposure Age. Construction and Building Materials, 275, Article ID: 122131. https://doi.org/10.1016/j.conbuildmat.2020.122131
Arliguie, G., Ollivier, J. and Grandet, J. (1982) Etude de l’effet retardateur du zinc sur l’hydratation de la pate de ciment portland. Cement and Concrete Research, 12, 79-86. https://doi.org/10.1016/0008-8846(82)90101-6
Marti, K. (2002) Catalogue d’éléments de construction avec calcul de la valeur U. Office fédéral de l’energie, Bern.