Hydrometallurgical Processing of Brazilian Iron Ore Tailings for the Synthesis of Pigments
- 1 Department of Mining Engineering, Federal University of Rio Grande do Sul, Porto Alegre, Brazil
- 2 Department of Mining Engineering, Federal University of Rio Grande do Sul, Porto Alegre, Brazil
Abstract
The aim of this study was to investigate the synthesis of iron oxide pigments from IOT. The sample of IOT was obtained through mining activity of the Quadrilátero Ferrífero in the state of Minas Gerais, Brazil. The procedure was carried out by hot acid leaching with hydrochloric acid (HCl) which allowed the recovery of about 95% of the iron in a liquor. The iron-based pigments—red (IBP_R), black (IBP_B), and yellow (IBP_Y)—were synthetised from the liquor by selective precipitation, crystallisation, and thermal procedures. The pigments were characterised by particle size distribution, mineral and chemical compositions, as well as colourimetric properties. The process of synthesis was successful and the procedure was shown to maximise the utilisation of mineral resources and minimise the environmental, social, and economic impacts associated with IOT disposal.
- Garcia, L.C., Ribeiro, D.B., Roque, F.O., Ochoa-Quintero, J.M. and Laurance, W.F. (2017) Brazil’s Worst Mining Disaster: Corporations Must Be Compelled to Pay the Actual Environmental Costs. Ecological Applications, 27, 5-9. https://doi.org/10.1002/eap.1461
- Fontes, W.C., Carvalho, J.M.F., Andrade, L.C., Segadães, A.M. and Peixoto, R.A. (2019) Assessment of the Use Potential of Iron Ore Tailings in the Manufacture of Ceramic Tiles: From Tailings-Dams to “Brown Porcelain”. Construction and Building Materials, 206, 111-121. https://doi.org/10.1016/j.conbuildmat.2019.02.052
- Almeida, V.O. (2019) Produção de cloreto férrico a partir de rejeitos de minério de ferro: um estudo de caracterização e aplicabilidades. Universidade Federal do Rio Grande do Sul, Porto Alegre.
- Defáveri, K.C.S., Santos, L.F., Carvalho, J.M.F., Peixoto, R.A.F. and Brigolini, G.J. (2019) Iron Ore Tailing-Based Geopolymer Containing Glass Wool Residue: A Study of Mechanical and Microstructural Properties. Construction and Building Materials, 220, 375-385. https://doi.org/10.1016/j.conbuildmat.2019.05.181
- Zhao, S., Fan, J. and Sun, W. (2014) Utilization of Iron Ore Tailings as Fine Aggregate in Ultra-High Performance Concrete. Construction and Building Materials, 50, 540-548. https://doi.org/10.1016/j.conbuildmat.2013.10.019
- Shettima, A.U., Hussin, M.W., Ahmad, Y. and Mirza, J. (2016) Evaluation of Iron Ore Tailings as Replacement for Fine Aggregate in Concrete. Construction and Building Materials, 120, 72-79. https://doi.org/10.1016/j.conbuildmat.2016.05.095
- Young, G. and Yang, M. (2019) Preparation and Characterization of Portland Cement Clinker from Iron Ore Tailings. Construction and Building Materials, 197, 152-156. https://doi.org/10.1016/j.conbuildmat.2018.11.236
- Bastos, L.A.C., Silva, G.C., Mendes, J.C. and Peixoto, R.A.F. (2016) Using Iron Ore Tailings from Tailing Dams as Road Material. Journal of Materials in Civil Engineering, 28, 1-9. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001613
- Das, S.K., Kumar, S. and Ramachandrarao, P. (2000) Exploitation of Iron Ore Tailing for the Development of Ceramic Tiles. Waste Management, 20, 725-729. https://doi.org/10.1016/S0956-053X(00)00034-9
- Galvão, J.L.B., Andrade, H.D., Brigolini, G.J., Peixoto, R.A.F. and Mendes, J.C. (2018) Reuse of Iron Tailings from Tailings Dams as Pigment for Sustainable Paints. Journal of Cleaner Production, 200, 412-422. https://doi.org/10.1016/j.jclepro.2018.07.313