Geotechnical Characterization and Stability Analysis of Excavation Slopes in Road Works: Case of the Works of the Seguela-Touba/Biankouma-Sipilou Road Development and Asphalt Project
- 1 Laboratory of Environmental Science and Technology, Jean Lorougnon Guédé University of Daloa, Daloa, Ivory Cost
- 2 Geomaterials Department, Faculty of Sciences and Technologies, Alassane Ouattara University, Bouaké, Ivory Cost
- 3 Laboratory of Environmental Science and Technology, Jean Lorougnon Guédé University of Daloa, Daloa, Ivory Cost
- 4 Laboratory of Environmental Science and Technology, Jean Lorougnon Guédé University of Daloa, Daloa, Ivory Cost
Abstract
This study analyzes the geotechnical properties of the cut slopes along the Biankouma-Sipilou road project and the Kabakouma and Sokourala spurs in order to identify the causes of embankment instability. The authors performed particle size analyses, Atterberg limit tests, modified Proctor tests, and CBR tests on samples taken at different depths from three specific sites: Pk1 + 760 - PK2 + 020, Pk4 + 500 - PK4 + 960, and PK9 + 460 - PK9 + 800. The results highlight specific soil horizons, including lateritic gravels, clayey sands, and deep clay layers ranging from low to high plasticity. For each study site, the soil horizons exhibit, from top to bottom, high to very low bearing capacity and stability parameters, reaching 7% and 9% respectively, for a dry density at the OPM of approximately 1.5 t/m 3 and 1.59 t/m 3 for slopes Pk4 + 500 - PK4 + 960 and PK09 + 460 - PK09 + 800. Slopes with unstable depths underwent stabilization techniques.
- Kouakou, B. (2019) Contribution à l’amélioration d’un Graveleux Latéritique Naturel de Type G3 par la méthode de litho-Stabilisation. Mémoire de Master en Géologie Appliquée, Option Géomatériaux et Géotechnique, Université Jean Lorougnon Guédé, 44 p.
- PND (2021-2025) Plan National de Développement. Ministère du plan et du développement, République de Côte d’Ivoire, 200.
- Afangbedzi, K. (2022) Etude hydrologique, hydraulique et structurale—Projet de renforcement de la route KORHOGO-SINEMATIALI-FERKESSEDOUGOU. Rapport de stage DESS Ingénierie géotechnique, 115 p.
- Avenard, J.M. (1972) Aspect de la géomorphologie. In: Milieu naturel de la Côte d ’ Ivoire , Mémoire OSTROM, 20-22.
- Ye, D.T., Koffi, E.K. and Béchi, F.G. (2020) Analyse des facteurs de l’érosion hydrique et dégradation environnementale en milieu urbain de Bouaké (Côte d’ivoire). Agronomie Africaine , 1, 68-92.
- NF EN 933-1 (2012) Essais pour déterminer les caractéristiques géométriques des granulats. Partie 1: Détermination de la granularité-Analyse granulométrique par tamisage. 19 p.
- NF EN ISO 17892-12 (2008) Reconnaissance et essai géotechnique-essais de laboratoire sur les sols. Partie 12: Détermination des limites de liquidités et de plasticités. 36 p.
- NF P 94-093 (2014) Sols: Reconnaissance et essais-Détermination des références de compactages d’un matériau-essais Proctor normal-essai Proctor modifié. 28 p.
- NF P94-078 (1997) Sols: Reconnaissance et essais-Indice CBR après immersion. Indice CBR immédiat. Indice portant immédiat-Mesure sur échantillon compacté dans le moule CBR. 12 p.
- GTR (2014) Chapitre. Classification des sols, Norme NF P11 300 et GTR, 12 p. https://www.mcours.net/cours/pdf/hasclic1/haclic872pdf
- Casagrande, A. (1948) Classification and Identification of Soils. Transactions of the American Society of Civil Engineers , 113, 901-930. https://doi.org/10.1061/taceat.0006109
- Hien, S. (2020) Caractérisation physique et mécanique de matériaux routiers naturels traitésaux liants hydrauliques: Cas des graveleux latéritiques du tronçon Grand Lahou Dabou et le ciment. Mémoire de Master en Géologie Appliquée option Géomatériaux et Géotechnique, Université Jean Lorougnon Guédé, 54 p.
- Tierraud, H.C. (2020) Retraitement en place au ciment: Données de contrôle qualité de la couche de fondation de la route Yamoussoukro-Bouaflé-Daloa. Mémoire de Master en Géologie Appliquée option Géomatériaux-géotechniques, Université Jean Lorougnon Guédé, 50 p.