Effect of Compaction Moisture Content on the Resilient Modulus of Unbound Aggregates from Senegal (West Africa)
- 1
- 2
- 3
- 4
Abstract
This paper presents the results of research conducted to investigate the effect of compaction moisture content on Resil- ient Modulus (Mr) of unbound aggregates. Three different aggregates (GRB, Basalt and Bandia limestone) was collect- ed from different sites within Senegal and then subjected to repeated load triaxial tests. Test results showed that the ef- fect of compaction water content is more significant in the dry side than in the wet side. The compaction water content has less effect on the GRB and the Basalt than on the Bandia limestone. GRB and Basalt are cohesionless materials and allow water to drain even during the compaction procedure. Change in water content increases as the compaction water content increases because of the drainage of the excess water during the compaction and loading procedures. For GRB and Basalt, at Wopt + 1.5%, most of the excess water is drained during the compaction of the sample and continue to be drained during the Resilient Modulus test. For the Bandia limestone, this drainage is less significant due to cohesion, absorption and hydratation.
- E. J. Yoder and M. W. Witczak, “Principles of Pavement Design,” 2nd Edition, Wiley, New York, 1975. doi:10.1002/9780470172919
- T. C. Hopkins, T. L. Beckham and C. Sun, “Resilient Modulus of Compacted Crushed Stone Aggregate Bases,” Research Report KTC-05-27/SPR-229-01-1F, Kentucky Transportation Center, College of Engineering, University of Kentucky, Lexington, 2007, p. 89.
- F. Lekarp, U. Isacsson and A. Dawson, “State of the Art. I: Resilient Response of Unbound Aggregates,” Journal of Transportation Engineering, Vol. 126, No. 1, 2000.
- H. B. Seed, F. G. Mitry, C. L. Monismith and C. K. Chan, “Prediction of Flexible Pavement Deflections from Laboratory Repeated Load Tests,” NCHRP Rep. No. 35, National Cooperative Highway Research Program, 1967.
- R. G. Hicks and C. L. Monismith, “Factors Influencing the Resilient Properties of Granular Materials,” Highway Research Record, Vol. 345, 1971, pp. 15-31.
- M. Fall, A. Sawangsuriya, C. H. Benson, T. B. Edil and P. J. Bosscher, “On the Investigations of Resilient Modulus of Residual Tropical Gravel Lateritic Soils from Senegal (West Africa),” Geotechnical and Geological Engineering Journal, Vol. 26, No. 1, 2008, pp. 109-111.
- M. Ba, M. Fall, F. Samb, D. Sarr and M. Ndiaye, “Resilient Modulus of Unbound Aggregate Base Courses from Senegal (West Africa),” Open Journal of Civil Engineering, Vol. 1, No. 1, 2011, pp. 1-6. doi:10.4236/ojce.2011.11001
- ASTM C136-06, “Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates,” Annual Book of ASTM Standards, ASTM International, West Conshohocken, 2006.
- ASTM D1557-09, “Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3(2700 kN-m/m3)),” Annual Book of ASTM Standards, ASTM International, West Conshohocken, 2009.
- ASTM C127-07, “Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate,” Annual Book of ASTM Standards, ASTM International, West Conshohocken, 2007.
- ASTM D6928-10, “Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus,” Annual Book of ASTM Standards, ASTM International, West Conshohocken, 2010.
- NCHRP, “Laboratory Determination of Resilient Modu- lus for Flexible Pavement Design,” National Cooperative Highway Research Program (NCHRP) Project 1-28A, Transportation Research Board of National Academies, 2004.