Development of Film Forming Agent HN-1 and Its Application in Drilling Fluid
- 1 College of Petroleum Engineering, Yangtze University, Jingzhou, China
Abstract
Borehole instability and reservoir damage had become the international technical problem s of petroleum exploration and development of complicated area, and the water of drilling fluid invading borehole wall and petroleum reservoir was the main cause of borehole instability and reservoir damage . In order to prevent the water of drilling fluid invading borehole wall and petroleum reservoir, domestic and foreign scholars recently put forward the technology of ultra-low permeable drilling fluid. Film forming agent was the key treating agent of ultra-low permeable drilling fluid, the film forming agent (HN-1) was developed, which did not affect properties of the drilling fluid and could decrease the filter loss of drilling fluid applied in Enping 24-2 oil field. Based on this research, ultra-low permeable drilling fluid could be applied to Enping 24-2 oil field. By the methods of testing ultra-low permeable drilling fluid properties, the drilling fluid invasion sand-bed depth, drilling fluid high temperature/high pressure (HTHP) sand - bed filter loss, the pressure- bearing ability of rock core and the ability of reservoir protection w ere studied. By synergistic effect, HN-1 containing the organic silicate and natural fiber polymer modified by organic amine prevented the liquid and solids in drilling fluid invading reservoir, decreased drilling fluid invasion sand-bed depth and drilling fluid HTHP sand-bed filter loss, improved the pressure-bearing ability of rock core and the ability of reservoir protection. The drilling fluid could decrease reservoir damage to the maximal degree, and it offered efficiency guarantee for exploitation Enping 24-2 oil field.
- P. Reid and H. Santos, “Ultralow Invasion Drilling Fluids: A Practical Route to Reduced Wellbore Instability, Re- duced Mud Losses, Wellbore Strengthening and Improved Well Productivity,” 2006 SPE/IADC Indian Drilling Technology Conference and Exhibition, Mumbai, 16-18 October 2006, SPE/IADC 101329.
- F. Labenski, P. Reid and H. Santos, “Drilling Fluids Approaches for Control of Wellbore Instability in Fractured Formations,” SPE/IADC Middle East Drilling Technology Conference & Exhibition, Abu, 20-22 October 2003, SPE/IADC 85304.
- H. Santos, “Increasing Leakoff Pressure with New Class of Drilling Fluid,” SPE/ISRM Rock Mechanics Conference, Irving, 20-23 October 2002, SPE/ISRM 78243.
- O. Friday, “Novel Wellbore Strengthening Enables Drilling of Exploration Well in a Highly Depleted Formation,” Middle East Drilling Technology Conference and Exhibition, Muscat, 24-26 October 2011, SPE/IADC 148506.
- N. G. Mandal, U. K. Jain and B. S. Anil, “Non Damaging Drilling Fluid Enhances Bore Hole Quality and Productivity in Conventional Wells of Mehsana Asset North Cambay Basin,” Indian Drilling Technology Conference and Exhibition, Mumbai, 16-18 October 2006, SPE/IADC 102128
- M. M. He, X. L. Pu and J. L. Su, “Research on Reservoir Protection Technology of Water Basis Film-Forming Drilling Fluid,” Drilling & Production Technology, Vol. 33, No. 5, 2010, pp. 93-95.
- K. E. Newsham, J. A. Rushing and P.M. Lasswell, “Use of Vapor Desorption Data to Characterize High Capillary Pressures in a Basin-Centered Gas Accumulation with Ultra-Low ConnateWater Saturations,” SPE Annual Technical Conference and Exhibition, Dnver, 5-8 October 2003, SPE 84596.
- A. G. Arbizu, P. Reid and J. G. Moreno, “Ultra-Low Invasion Fluids: A Viable Technical Solution to Drill in Eastern Venezuela,” 2009 SPE Latin American and Caribbean Petroleum Engineering Conference, Cartagena, 31 May-3 June 2009, SPE 12391.
- P. Reid and H. Santos, “Novel Drilling, Completion and Workover Fluids for Depleted Zones: Avoiding Losses. Formation Damage and Stuck Pipe,” SPE/IADC Middle East Drilling Technology Conference & Exhibition, Abu, 20-22 October 2003, SPE 85326.
- J. S. Sun, X. B. Lin and B. Zhang, “Drilling Fluid Technology Developing Tendency Predicted,” Drilling Fluid & Completion Fluid, Vol. 22, No. 1, 2005, pp. 57-59.
- B. Guichard, A. V. Eliokem and J. Friedheim, “An Organosoluble Polymer for Outstanding Fluid Loss Control with Minimum Formation Damage,” European Formation Damage Conference, Scheveningen, 30 May-1 June 2007, SPE 107281.