The national highways are always considered as the economic backbone of the country and have often assisted development work all along their routes. The National Highway (NH-1D) is the most strategic and the only all weather surface link between the two districts of Ladakh region (Kargil and Leh). The area under investigation experiences high vehicular traffic, particularly between March and August, as in the remaining months the Kargil and Leh districts remain cutoff from each other due to bad weather. In recent years, frequent occurrences of slope failures along the highway primarily affect the smooth functioning of the traffic movement which severely affects the life of the people of the area. Strategically, this road network is very important and plays a significant role in transportation and other activities. In order to ensure the stability of road network in the area, it becomes extremely important to understand the triggering mechanism of these failures. The present study made an attempt in this direction and the Slope Mass Rating (SMR) method has been used for slope stability analysis at different locations. The stability of the slopes was also assessed using kinematic analysis conjointly with SMR to identify the types of failure and its potential failure directions associated with each slope. The result obtained after calculating RMR from the selected facets ranges from 11 to 89 with lower values indicating presence of potentially unstable areas. Results have shown that in a total of 20 facets, 65.28% belong to wedge failure, 22.26% belong to toppling failure and 12.45% belong to plane failure.
Kramer, S.L. (1996) Geotechnical Earthquake Engineering. Prentice-Hall Civil Engineering and Engineering Mechanics Series, Prentice Hall, Upper Saddle River, 653.
Singh, Y. (2006) Geotechnical and Structural Evaluation of Tectonostratigraphic Units along the National Highway, NH-1A between Udhampur and Batote Jammu Himalaya. Ph.D. Thesis, University of Jammu, Jammu, Unpublished.
Wadia, D.N. (1928) The Geology of the Poonch State, Kashmir and Adjacent Parts of the Panjab. Memoirs of the Geological Survey of India, 51, 233.
Wadia, D.N. (1937) The Cretaceous Volcanic Series of Astor-Deosai Kashmir and Is Intrusion. Record Geological Survey of India, 72, 151-161.
Sharma, V.P., Verma, S.N. and Sharma, A.R. (1979) Structure and Stratigraphy of Ramban-Banihal-Galabgarh-Budhil Sector of Pir Panjal Range, Jammu and Kashmir State. Geological Survey of India, 41, 337-351.
Srikantia, S.V. (1973) The Tectonic and Stratigraphic Position “Panjal Volcanics” in Kashmir Himalaya—A Reappraisal. Himalayan Geology, 3, 59-71.
Srikantia, S.V. and Bhargava, O.N. (1974) The Salkhala and Jutogh Relationship in the Kashmir and Himachal Himalaya—A Reappraisal. Himalayan Geology, 4, 396-413.
Kundal, S.N. (2013) Late Pliocene (Piacenzian Stage) Fossil Molluscs from Upper Siwalik Subgroup of Jammu, Jammu and Kashmir, India. International Research Journal of Earth Sciences, 1, 31-38.
Parmar, V. (2013) Fossil Molluscs from the Middle Miocene Lower Siwalik Deposits of Jammu, India. International Research Journal of Earth Sciences, 1, 16-23.
Parmar, V. and Jigmet, T. (2014) First Fossil Discoglossinae (Anura) from the Siwaliks of the Indian Subcontinent. International Research Journal of Earth Sciences, 2, 1-6.
Bhatia, T.R. and Bhatia, S.K. (1973) Sedimentology of the Slate Belt of Ramban-Banihal Area, Kashmir Himalaya. Himalayan Geology, 3, 116-134.
Bhat, G.M. and Pandita, S.K. (1997) Turbidite to Storm Transition Sedimentation during Early Carboniferous, Kashmir Himalaya. Journal of the Geological Society of India, 49, 545-558.
Bhat, G.M., Pandita, S.K., Dhar, B.L., Sahni, A.K. and Haq, IHSAN-UL (2002) Preliminary Geotechnical Investigation of Slope Failures along Jammu-Srinagar National Highway between Batote and Banihal. Reprinted from Aspects of Geology Environment of the Himalaya, 275-288.
Andrabi, S.I.H. (2002) Evaluation of Sediment Attributes and Structural Geometry of Tectonostratigraphic Units along the National Highway between Batote and Banihal, Jammu & Kashmir (India). Unpublished Ph.D. Thesis, University of Jammu, Jammu.
Norberth, M. (2000) Highway Rock Cut Stability Assessment in Rock Masses Not Conducive to Stability Calculations. Proceedings of the 51st Annual Highway Geology Symposium, Seattle, 29 August-1 September 2000, 249-259.
Umrao, R.K., Singh, R., Ahmad, M. and Singh, T.N. (2011) Stability Analysis of Cut Slopes Using Continuous Slope Mass Rating and Kinematic Analysis in Rudraprayag District, Uttarakhand. Geomaterials, 1, 79-87. http://dx.doi.org/10.4236/gm.2011.13012
Rautela, P. and Pande, R.K. (2005) Traditional Inputs in Disaster Management: The Case of Amparav, North India, International Journal of Environmental Studies, 62, 505-515.
Uniyal, A. and Pande, R.K. (2003) The Fury of Nature in Uttaranchal: Uttarkashi Landslide of the Year. Disaster Prevention and Management, 16, 562-575.
Srikantia, S.V. and Razdan, M.L. (1980) Geology of Part of Central Ladakh Himalaya with Particular Reference to the Indus Tectonic Zone. Journal of the Geological Society of India, 21, 523-545.
Tewari, A.P. (1964) On the Upper Tertiary Deposits of Ladakh Himalayas and Correlation of Various Geotectonic Units of Ladakh with Those of Kumaon, Tibet Region. Proceedings of the 22nd International Geological Congress, 11, 37-58.
Shah, S.K., Sharma, M.L., Gergan, J.T. and Tara, C.S. (1976) Stratigraphy and Structure of Western Part of Indus Suture Belt, Ladakh North-Western Himalaya. Himalayan Geology, 6, 534-556.
Gansser, A. (1977) The Great Suture Zone between Himalaya and Tibet: A Preliminary Account. Himalaya-sciences de la terra Colloqes International, 7-10 December 1976, Editions du Centre National de la Researche Scientifique, Paris, 268, 181-192.
Thakur, V.C. (1981) Regional Framework and Geodynamic Evolution of Indus Tsangpo Suture Zone in Ladakh Himalayas. Transactions of the Royal Society of Edinburgh: Earth Sciences, 72, 89-97. http://dx.doi.org/10.1017/S0263593300009925
Sinclair, H.D. and Jaffey, N. (2001) Sedimentology of the Indus Group, Ladakh, Northern India Implications for the Timing of Initiation of the Palaeo-Indus River. Journal of the Geological Society, London, 158, 151-162. http://dx.doi.org/10.1144/jgs.158.1.151
Bieniawski, Z.T. (1973) Engineering Classification of Jointed Rock Masses. Transactions of the South African Institution of Civil Engineers, 15, 355-344.
Bieniawski, Z.T. (1979) The Geomechanical Classification in Rock Engineering Applications. Proceedings of the 4th International Congress Rock Mechanics, Montreux, 2-8 September 1979, 41-48.
Bieniawski, Z.T. (1989) Engineering Rock Mass Classifications. Wiley-Interscience, New York.
Palmstrom, A. (2005) Measurements of and Correlations between Block Size and Rock Quality Designation (RQD). Tunnelling and Underground Space Technology, 20, 362-377. http://dx.doi.org/10.1016/j.tust.2005.01.005
Romana, M. (1985) New Adjustment Ratings for Application of Bieniawski Classification to Slopes. Proceedings of International Symposium on the Role of Rock Mechanics, International Society for Rock Mechanics, Salzburg, 49-53
Hoek, E. and Bray, J. (1981) Rock Slope Engineering. Revised 2nd Edition, The Institution of Mining and Metallurgy, London.
Goodman, R.E. (1989) Introduction to Rock Mechanics. Wiley, New York.
Watts, C.F. (2003) User’s Manual Rockpack III for Windows, Rock Slope Stability Computerized Analysis Package, Part One—Stereonet Analyses. C.F. Watts & Associates.