Geotechnical Characterization of Jordanian Limestone
- 1 Department of Mining Engineering, Al-Hussein bin Talal University, Ma’an, Jordan
- 2 Department of Mining Engineering, Al-Hussein bin Talal University, Ma’an, Jordan
- 3 Department of Mining Engineering, Al-Hussein bin Talal University, Ma’an, Jordan
- 4 Department of Mining Engineering, Al-Hussein bin Talal University, Ma’an, Jordan
Abstract
Full knowledge of the physical and mechanical behavior of limestone rocks is required for the safe design of structures. Little work has been done to characterize the physical and mechanical properties of Jordanian limestone especially under watery environment. Therefore, in this study the physical and mechanical properties of some Jordanian limestone were investigated. The limestone samples were collected from five different parts of the country. The porosity and dry density of the selected limestone were compared. The reduction on the compressive strength and tensile strength for dry, 50% and 100% water saturation were determined. All rock experienced a reduction on both the compressive strength and tensile strength as a function of saturation degree. Large reduction happens on the strength properties for the Zarka limestone than the other limestone when the samples are fully saturated.
- Awadallah, M.I. and Imran, M.M.A. (2007) Experimental Investigation of g-Ray Attenuation in Jordanian Building Materials Using HPGE-Spectrometer. Journal of Environmental Radioactivity, 94, 129-136.
- Naghoj, N., Youssef, N. and Maaitah, O. (2010) Mechanical Properties of Natural Building Stone: Jordanian Building Limestone as an Example. Jordan Journal of Earth and Environmental Sciences, 3, 37-48.
- Tarawneh, K., Al-Thyabat, S. and Al-Harahsheh, M. (2007) Mineralogical, Physical and Mechanical Properties of Limestone Rocks in Ma’an Area, South Jordan. Annual of the University of Mining and Geology “St. Ivan rilski”, Vol. 50, Part I, Geology and Geophysics.
- Ballivy, G., Ladanyi, B. and Gill, D.E. (1976) Effect of Water Saturation History on the Strength of Low-Porosity Rocks. STP599, 4-20. https://doi.org/10.1520/STP39072S
- Broch, E. (1979) Changes in Rock Strength by Water. Proceedings of 4th Congress of International Society for Rock Mechanics, Montreux, Switzerland, September 1979, 71-75.
- Masuda, K. (2001) Effects of Water on Rock Strength in a Brittle Regime. Journal of Structural Geology, 23, 1653-1657. https://doi.org/10.1016/s0191-8141(01)00022-0
- Van Eeckhout, E.M. (1976) The Mechanism of Strength Reduction Due to Moisture in Coal Mine Shales. International Journal of Rock Mechanics and Mining Science & Geomechanics Abstract, 13, 61-67. https://doi.org/10.1016/0148-9062(76)90705-1
- Vásárhelyi, B. (2005) Statistical Analysis of the Influence of Water Content on the Strength of the Miocene Limestone. Rock Mechanics and Rock Engineering, 38, 69-76. https://doi.org/10.1007/s00603-004-0034-3
- ISRM (1981) Suggested Methods for Determining Tensile Strength of Rock Materials. In: Brown, E.T., Ed., Suggested Method: Rock Characterization, Testing and Monitoring, Pergamon Press, Oxford, 211.
- Barlett, F.M. and Macgregor, J.M. (1993) Effect of Moisture Condition on Concrete Core Strengths. ACI Material Journal, 9, 227-236.
- Poon, C.S., Shui, Z.H., Lam, L., Fok, H. and Kou, S.C. (2004) Influence of Moisture States of Natural and Recycled Aggregates on the Slump and Compressive Strength of Concrete. Cement and Concrete Research, 34, 31-36. https://doi.org/10.1016/S0008-8846(03)00186-8
- Li, Z., Reddish, D.J. and Sheng, Y. (2006) Mechanism for Mining Subsidence Reactivation Due to Groundwater Recharging—The Geotechnical Aspect. IAEG Paper Number 333.