Rock Mass Characterization and Support Design for Underground Additional Surge Pool Cavern—A Case Study, India
- 1 National Institute of Rock Mechanics, Bengaluru, India
- 2 National Institute of Rock Mechanics, Bengaluru, India
- 3 National Institute of Rock Mechanics, Bengaluru, India
Abstract
For better rock mass characterization and support design, 3D engineering geological mapping was carried for the heading portion of the under construction 200.00 m long, 68.75 m high and 20.20 m wide underground additional surge pool cavern of a Pranahitha-Chevella Sujala Sravanthi lift irrigation scheme package 8, India. To study cavern behavior, 3D geologic mapping of heading portion is very important for large cavern for predicting geologic conditions in benching down up to invert level, planning support system, selecting inclination for best location of supplemental rock bolt and choosing strategic locations for various types of instrumentation. The assessment of Tunnel Quality Index “ Q ” and Geomechanics classification for the granitic rock mass was done based on the information available of the rock joints and their nature and 3D geological logging. Hoek-Brown parameters were also determined by the statistical analysis of the results of a set of triaxial tests on core samples. On basis of geological characteristics and NMT Q -system chart, support system is recommended which includes rock bolt, steel fibre reinforced shotcrete and grouting. To evaluate the efficacy of the proposed support system, the capacity of support system is determined.
- Bieniawski, Z.T. (1989) Engineering Rock Mass Classification. John Willey and Sons, New York, 251 p.
- Ramam, P.K. and Murty, V.N. (2012) Geology of Andhra Pradesh. Geological Society of India, Bengaluru, 244 p.
- Prakash, D. and Sharma, I.N. (2011) Metamorphic Evolution of Karimnagar granulite Terrane, Eastern Dharwar Craton, South India. Geological Magazine, 48, 112-132. https://doi.org/10.1017/S0016756810000488
- ISRM (1981) Suggested Methods for the Rock Characterization, Testing and Monitoring. ISRM Commission on Testing Methods, Pergamon Press, Oxford.
- Barton, N., Lien, R. and Lunde, J. (1974) Engineering Classification of Rock Masses for the Design of Tunnel Support. Rock Mechanics, 6, 189-236. https://doi.org/10.1007/BF01239496
- Grimstad, E. and Barton, N. (1993) Updating of the Q-System for NMT. Proceedings of the International Symposium on Sprayed Concrete, Fagernes, 22-26 October 1993, 46-66.
- Grimstad, E., Kankes, K., Bhasin, R., Magnussen, A. and Kaynia, A. (2002) Rock Mass Quality Q Used in Designing Reinforced Ribs of Sprayed Concrete and Energy Absorption. Proceedings of International Symposium on Sprayed Concrete, Davos, 22-26 September 2002, 134-142.
- Bieniawski, Z.T. (1973) Engineering Classification of Jointed Rock Masses. Transaction of the South African Institution of Civil Engineers, 15, 335-344.
- Bieniawski, Z.T. (1979) The Geomechanics Classification in Rock Engineering Application. Proceedings 4th International Congress on Rock Mechanics, Montreux, 2-8 September 1979, Vol. 2, 41-48.
- Gonzalez de Vallejo, L.I. (1983) A New Rock Classification System for Underground Assessment Using Surface Data. Proceedings International Symposium on Engineering Geology and Underground Construction, Lisbon, 12 September 1983, 85-94.
- Nakao, K., Iihoshi, S. and Koyama, S. (1983) Statistical Reconsiderations on the Parameters for Geomechanics Classification. Proceeding 5th International Congress on Rock Mechanics, Melbourne, 10-15 April 1983, Vol. 1, B13-B16.
- Naithani, A.K. (2007) RMR—A System for Characterizing Rock Mass Classification: A Case Study from Garhwal Himalaya, Uttarakhand. Journal Geological Society of India, 70, 627-640.
- Hoek, E. and Brown, E.T. (1997) Practical Estimates of Rock Mass Strength. International Journal Rock Mechanics Mining Science, 34, 1165-1186.