Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Green and Sustainable Chemistry (GSC) covers subjects relating to reducing the environmental impact of chemicals and fuels by developing alternative and sustainable technologies that are non-toxic to living things and the environment. All the manuscripts must be prepared in English and are subject to a rigorous and fa…
Heinz Langhals, Dominik Zgela, Thorben Schlücker
Technical polymers could be identified by means of their remarkably strong auto fluorescence. The time constants of this fluorescence proved to be characteristic for the individual polymers and can be economically determined by integrating procedures. The thu…
Wannida Apisuk, Ken Tsutsumi, Hyun Joon Kim, Dong Hyun Kim, Kotohiro Nomura
Recent successful examples for synthesis of new polyolefins containing (polar) functionalities by adopting the approaches by controlled incorporation of reactive functionalities (and the subsequent introduction of polar functionalities under mild conditions)…
Vanessa Guzmán-Velderrain, Yudith Ortega López, Jesús Salinas Gutiérrez, Alejandro López Ortiz, Virginia H. Collins-Martínez
The present investigation shows experimental results obtained with TiO 2 thin films synthesized by the sol-gel method assisted with hydrothermal treatment over polypropylene, using the dip coating technique. Obtained coatings were characterized through SEM, X…
Kejie Cai, Hongqiang He, Yuwei Chang, Weiming Xu
A clean preparation of aryl diazonium ions using methyl nitrite is described. Further reaction of the aryl diazonium ions with substituted benzenamine, substituted phenol and nathphol in deferent kinds of diazotization has been developed. In order to improve…
Abdussalam Ali Maihub, Faten Suliman Alassbaly, Marei Mailoud El-Ajaily, Abdunnaser Mohamed Etorki
New mixed ligand chelates synthesized from di-and trivalent metal ions (Cr, Co, Ni, and Cu ions) and Schiff base (L<sup>1</sup>) resulted from the condensation of 4-dimethylaminobenzaldehyde with 2-aminophenol as primary ligand, whereas 2-nitroaniline (L<sup>…
Venkataramana Medisetti, Umadevi Parimi, Ramesh Babu Anagani, K. V. V. V. Satyanarayana
An efficient and versatile practical protocol for the chemoselective N - tert -butoxycarbonylation of amines using Nano- γ -Fe 2 O 3 and (BOC) 2 O. Nano- γ -Fe 2 O 3 was applied as an efficient, green, heterogeneous and reusable catalyst at ambient temperatur…
Haruna Banno, Ben Kariya, Norifumi Isu, Muneaki Ogawa, Saeko Miwa, Keisuke Sawada, Junki Tsuge, Shoichiro Imaizumi, Hidenori Kato, Kyota Tokutake, Seiichi Deguchi
The effect of (Pt-loaded)TiO 2 crystallite diameter ( i.e. Scherrer size) on the photocatalytic water splitting rate was investigated. (Pt-loaded)TiO 2 powders with a wide range of crystallite diameters from about 16 to 45 nm with a blank region between about…
Seiichi Deguchi, Ben Kariya, Norifumi Isu, Shoji Shimasaki, Haruna Banno, Saeko Miwa, Keisuke Sawada, Junki Tsuge, Shoichiro Imaizumi, Hidenori Kato, Kyota Tokutake
In order to enhance photocatalytic water splitting rates with Pt/TiO 2 powder, sufficient agitation of the biphasic medium is required to switch surficial reactions to volumetric reactions. Additionally, agitation is conducive to higher diffusion rates of the…
Jan Simbera, Richard Sevcik, Pavel Pazdera
Three new multi-step one-pot processes for high-yielding cyclohexanecarbonitrile synthesis starting from cyclohexanone were developed for industrial application. In contrast to the current synthetic process, all of the processes described were designed to pro…
Nathalie Monnerie, Martin Roeb, Anis Houaijia, Christian Sattler
The production of environment friendly green fuels is based on energy from renewable sources. Among the renewable sources, wind power is a very growing power technology. An example which has been discussed very widely is hydrogen which is an ideal fuel for a…
No articles in this issue.
Green and Sustainable Chemistry (GSC) covers subjects relating to reducing the environmental impact of chemicals and fuels by developing alternative and sustainable technologies that are non-toxic to living things and the environment. All the manuscripts must be prepared in English and are subject to a rigorous and fa… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).