A Novel 4WD Electric Vehicle Control Strategy Based on Direct Torque Control Space Vector Modulation Technique
- 1 Faculty of the Sciences and Technology, Bechar University, Bechar, Algeria
- 2 Faculty of the Sciences and Technology, Bechar University, Bechar, Algeria
Abstract
Four-Wheels-Drive (4WD) electric Vehicle (EV) controlled with Direct Torque Control based Space Vector Modulation (DTC-SVM) is presented, where the electrical traction chain was well analyzed and studied from the lithium battery, the buck boost to the mechanical load behavior. The speed of four wheels is calculated independently during the turning with the electronic differential system computations which distributes torque and power to each in-wheel motor according to the requirements, adapts the speed of each motor to the driving conditions. The basic idea of this work is to maintain the initial battery state of charge (SOC) equal to 70% and the prototype was tested in several topology conditions and under speed. The simulations carried in Matlab/Simulink verified the efficiency of the proposed DTC-SVM controller, and show that the system has more favorable dynamic performance. Results also indicate that this strategy can be successfully implemented into the traction drive of the modern 4WD electric vehicles.
- J. Wang, Q. Wang, L. Jin and C. Song, “Independent Wheel Torque Control of 4WD Electric Vehicle for Differential Drive Assisted Steering,” Mechatronics, Vol. 21, 2011, pp. 63-76. doi:10.1016/j.mechatronics.2010.08.005
- J. Wang, Q. Wang and L. Jin, “Modeling and Simulation Studies on Differential Drive Assisted Steering for EV with Four-Wheel-Independent-Drive,” Proceedings of the 4th IEEE Vehicle Power and Propulsion Conference (VPPC2008), Harbin, 3-5 September 2008, pp. 1-7.
- H. Yoichi, T. Yasushi and T. Yoshimasa, “Traction Control of Electric Vehicle: Basic Experimental Results Using the Test EV ‘UOT Electric March,’” IEEE Transaction on Industry Application, Vol. 34, No. 5, 1998, pp. 1131-1138.
- F. Wu and T. J. Yeh, “A Control Strategy for an Electrical Vehicle Using Two In-Wheel Motors and Steering Mechanism,” Proceedings of AVEC’08, Kobe, 6-9 October 2008, pp. 796-801.
- S. Shin-Ichiro, S. Hideo and H. Yoichi, “Motion Control in an Electric Vehicle with Four Independently Driven In-Wheel Motors,” IEEE Transactions on Mechatronics, Vol. 4, No. 1, 1999, pp. 9-16. doi:10.1109/3516.752079
- T. G. Habetler, F. Profumo, M. Pastorelli and L. Tolbert, “Direct Torque Control of Induction Machines Using Space Vector Modulation,” IEEE Transaction on Industry Applications, Vol. 28, No. 5, 1992, pp. 1045-1053. doi:10.1109/28.158828