Force Control in Monopod Hopping Robot While Landing
- 1 Department of Mechanical and Industrial Engineering
- 2 Indian Institute of Technology
- 3
Abstract
In this paper, the issue of control of impact forces generated during the interaction between the hopping ro-bot toe and the ground while landing has been considered. The force thus generated can damage the robot altogether. With the objective to control these impact forces, impedance control strategy has been applied to the hopping robot system. The dynamics pertaining to the impact between robot toe and ground has been modeled as in case of a ball bouncing on the ground. Bond Graph theory has been used for the modeling of the hopping robot system. Simulation results show that impact forces generated during the landing has been controlled to a specified limiting value. This model and the corresponding analysis can be further extended for understanding the dynamics involved in continuous hopping of robot with constant height and velocity control.
- M. H. Raibert, M. A. Chepponis and H. Brown, “Experiments in Balance with 3D One-Legged Hopping Machine,” International Journal of Robotics Research, Vol. 3, No. 2, 1984, pp. 75-92.
- S. H. Hyon and T. Mita, “Development of a Biologically Inspired Hopping Robot-‘Kenken’,” Proceedings of ICRA’02, IEEE International Conference on Robotics and Automation, Washington, DC, 2002, pp. 3984-3991.
- Y. Sato, E. Ohashi and K. Ohnishi, “Impact Force Reduction for Hopping Robot,” Proceedings of IEEE 31st Annual Conference of IECON’2005, 6-10 November 2005, pp. 1821-1826.
- N. Fujii and K. Ohnishi, “Smooth Transition Method from Compliance Control to Position Control for One Legged Hopping Robot,” Proceedings of IEEE International Conference on Industrial Technology, ICIT 2006, 15-17 December 2006, pp. 164-169.
- P. M. Pathak, A. Mukherjee and A. Dasgupta, “Impedance Control of Space Robots using Passive Degrees of Freedom in Controller Domain,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 127, No. 4, 2005, pp. 564-578.
- A. Mukherjee, R. Karmarkar and A. K. Samantaray, “Bondgraph in Modeling Simulation and Fault Identification,” I. K. International Publishing House Pvt. Ltd., New Delhi, 2006.
- A. Mukherjee, “Users Manual of SYMBOLS Shakti,” High-Tech Consultants, S.T.E.P, Indian Institute of Technology, Kharagpur, 2006. http://www.htcinfo.com/
- V. Damic and J. Montgomery, Mechatronics by bond graphs: An Object-Oriented Approach to Modeling and Simulation, Springer-Verlag, Berlin, Heidelberg, 2003.
- G. Gilardi and I. Sharf, “Literature Survey of Contact Dynamics Modeling”, Mechanism and Machine Theory Vol. 37, No. 10, 2002, pp. 1213-1239.