Ethernet Control AC Motor via PLC Using LabVIEW
- 1
- 2
Abstract
Remotely control applications over a wide area had been commonly used in the industries today. One of the common applications requires remote control and monitoring is inverter fed induction drive system. Drive system has various types of controller, in order to perform some actions such as control the speed, forward and reverse turning direction of the motor. This approach can be done by Programmable Logic Controller (PLC), and with the rise of the technology, Ethernet module will be used in order to achieve the remote control system. Plus the PLC today can be controlled not only using its original software, but 3rd party software as well, such as LabVIEW. LabVIEW is a human machine interfaces design software that is user friendly. It can be easily communicate with different hardware.
- W.-F. Chang, Y.-C. Wu and C.-W. Chiu, “Design and Implementation of a Web-Based Distance PLC Laboratory,” Proceedings of the 35th Southeastern Symposium on System Theory, Morgantown, 16-18 March 2003, pp. 326-329. doi:10.1109/SSST.2003.1194584
- M. Rodrigues, J. Mendes and J. Fonseca, “Application of a Web-Based Monitoring and Control System in Plastic Rotational Moulding Machine,” IEEE International Conference on Industrial Technology, Hammamet, 8-10 December 2004, pp. 819-823
- N. N. Barsoum and J. A. Roland, “Ethernet LabVIEW Control,” Undergraduate Thesis, Curtin University Sarawak Campus, Sarawak, , 2010.
- National Instruments, “Getting Started with LabVIEW,” National Instruments, Technique Report 373427F-01, 2009.
- National Instruments, “Using the LabVIEW Shared Variable,” 2010. http://zone.ni.com/devzone/cda/tut/p/id/4679
- N. N. Barsoum and Y. Y. Ng, “PLC Humidity Control Inverter Fed Induction Motor,” Undergraduate Thesis, Curtin University Sarawak Campus, Sarawak, 2009.
- OMRON Industrial Automation, “SYSMAC CJ Series Programmable Controller,” OMRON, Technique Report W393-E1-14, 2009.
- OMRON Industrial Automation, “CJ1M CPU Units with Ethernet Functions,” OMRON, Technique Report, 2005.