Blank Holder Force Control System Driven by Servo-Motor
- 1
- 2
- 3
Abstract
Blank holder force (BHF) control is used to prevent wrinkles of sheet metal in deep drawing process. Based on a novel conception of BHF control technique driven by servo-motor, a new BHF device with six-bar linkage mechanism has been designed and manufactured. Whole control system of the new BHF technique was developed, and the basic structure of the hardware configuration of the system was given. Software analysis, implementation and division of the functional modules have been done. Also, the control software in data acquisition and processing module has been developed in the relevant technology of the BHF control system for the requirements of real-time, stability and accuracy. By the new BHF device combined with the hardware and the software system, the BHF can be regulated accurately variation with the predefined BHF profile in deep drawing process.
- Z. Q. Sheng, S. Jirathearanat and T. Altan, “Adaptive FEM Simulation for Prediction of Variable Blank Holder Force in Conical Cup Drawing,” International Journal of Machine Tools & Manufacture, Vol. 44, No. 5, 2004, pp. 487-494. doi.10.1016/j.ijmachtools.2003.11.001
- E. J. Obermeyer and S. A. Majlessi, “A Review of Recent Advances in the Application of Blank Holder Force towards Improving the Forming Limits of Sheet Metal Parts,” Journal of Materials Processing Technology, Vol. 75, No. 1-3, 1998, pp. 222-234. doi.10.1016/S0924-0136(97)00368-3
- K. Siegert, E. Dannenmann, S. Wagner and A. Galeiko, “Closed-Loop Control System for Blank Holder Forces in Deep Drawing,” Annals of the CIRP, Vol. 44, No. 1,1995, pp. 251-254.
- D. M. Rodrigues, C. Leitao and L. F. Menezes, “A Multi-Step Analysis for Determining Admissible Blank-Holder Forces in Deep-Drawing Operations,” Materials and Design, Vol. 31, No. 3, 2010, pp. 1475-1481. doi.10.1016/j.matdes.2009.08.028
- W. Thomas, “Product Tool and Process Design Methodology for Deep Drawing and Stamping of Sheet Metal Parts,” PhD Thesis, Ohio State University, Columbus, 1999.
- D. E. Hardt and R. C. Fenn, “Real-Time Control of Sheet Stability during Forming,” ASME Journal of Engineering for Industry, Vol. 115, No. 3, 1993, pp. 299-308.
- T. Yagami, K. Manabe and Y. Yamauchi, “Effect of Alternating Blank Holder Motion of Drawing and Wrinkle Elimination on Deep-Drawability,” Journal of Materials Processing Technology, Vol. 187-188, 2007, pp. 187-191.
- H. B. Sim and M. C. Boyce, “Finite Element Analyses of Real-Time Stability Control in Sheet Forming Processes,” Journal of Materials Processing Technology, Vol. 114, No. 1, 1992, pp. 180-188
- J. Zhao, H. Q. Cao, L. X. Ma, et al., “Study on Intelligent Control Technology for the Deep Drawing of an Axi-Symmetric Shell Part,” Journal of Materials Processing Technology, Vol. 151, No. 1-3, 2004, pp. 98-104. doi.10.1016/j.jmatprotec.2004.04.023
- S. J. Qin, “State-of-the-Art of Blank Holding Force Control Technology and Feasibility of Numerical Servo-Control Holding,” China Mechanical Engineering, Vol. 18, No. 1, 2007, pp. 120-125.
- L. Liu, Y. Li, L. W. Wen and J. Xiao, “PMAC-Based Tracking Control System for 8-Axis Automated Tape-Laying Machine,” Chinese Journal of Aeronautics, Vol. 22, No. 5, 2009, pp. 559-563. doi.10.1016/S1000-9361(08)60141-7
- K.-S. Honga, K.-H. Choib, J.-G. Kimc and S. Lee, “A PC-Based Open Robot Control System: PC-ORC,” Robotics and Computer Integrated Manufacturing, Vol. 17, No. 4, 2001, pp. 355-365. doi.10.1016/S0736-5845(01)00010-2