The Measurement and Uncertainty Analysis of Antenna Factor of Microwave Antennas Based on Standard Site Method
- 1 Shanghai Institution of Measurement and Testing Technology, Shanghai, China
- 2 Shanghai Institution of Measurement and Testing Technology, Shanghai, China
- 3 Shanghai Institution of Measurement and Testing Technology, Shanghai, China
- 4 Shanghai Institution of Measurement and Testing Technology, Shanghai, China
Abstract
A method of Standard Site Method (SSM) in the American National Standards Institute’s ANSI C63.5 is described in the frequency ranges from 30 MHz to 1000 MHz. And a measurement system is set up for determining antenna factors (AF) of antennas on an Open Area Test Sites (OATS). AF of antennas including log-periodic antenna and biconical antenna is measured with SSM method by Shanghai Institute of Measurement and Testing Technology (SIMT), which shows good agreement to data measured by National Institute of Metrology (NIM). In the end, it analyzes the measurement uncertainty of SIMT in the 30 MHz to 1000 MHz frequency band and does comparison to that of NIM.
- ANSI C63.5 (2004) American National Standard for Electromagnetic Compatibility-Radiated Emission Measurements in Electro-magnetic Interference (EMI) Control-Calibration of Antennas (9 kHz to 40 GHz).
- ANSI C63.7 (2005) American National Standard Guide for Construction of Open- Area Test Sites for Performing Radiated Emission Measurements.
- CISPR 16-1-4 (2003) Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods-Part 1-4: Radio Disturbance and Im-munity Measuring Apparatus-Ancillary Equipment-Radiated Disturbances.
- CISPR 16-1-5 (2006) Antenna Calibra-tion.
- CISPR 16-1-6 (2008) Standard for the Calibration of Antennas Used for Radiated Emission Measurements.
- Smith, A.A. (1982) Standard-Site Method for Determining Antenna Factors. IEEE Transactions on Electromagnetic Compatibility, EMC-24, 316-322. https://doi.org/10.1109/TEMC.1982.304042
- ISO/IEC Guide 98-3 (2008) Uncertainty of Measurement-Part 3: Guide to the Ex-pression of Uncertainty in Measurement.