Design of Dynamic Reconfigurable Structure Based on Integrated Filter Banks
- 1 College of Information and Communication Engineering, Harbin Engineer University, Harbin, China
- 2 College of Information and Communication Engineering, Harbin Engineer University, Harbin, China
- 3 College of Information and Communication Engineering, Harbin Engineer University, Harbin, China
Abstract
In electronic confrontation, radar confrontation is an important part. Various radars widely used in modern warfare are the most important equipment in the field of information acquisition and precision guidance. Especially in the vast battle space, in order to achieve timely, accurate and comprehensive access to various target information, the role of radar is irreplaceable. Especially in the vast battle space, the role of radar is irreplaceable in order to achieve timely, accurate and comprehensive access to various target information. Therefore, in the war, it will not be able to protect their own survival and play combat effectiveness if not having the radar's ability to fight. At this time, that is the need for radar equipment in time to detect radar exposure, rapid measurement of radar signal parameters and identify threat signals, and targeted to do the implementation of interference or the implementation of technical attacks. In order to extract the parameters of the received signal to facilitate the subsequent research and analysis, this paper deduces the structure of the integrated filter bank in detail, and gives the reconfigurable filter bank structure design method, under the condition of accurate reconstruction of the signal. Based on the analysis of the design and calculation complexity of the filter bank structure, the dynamic reconfigurable design method con-sumes less hardware resources and wide application range, and the simulation structure also verifies the correctness and flexibility of the structure.
- Zhu, X. and Si, X.C. (2009) An Efficient Dynamic Digital Channelization Method. Journal of Harbin Institute of Technology, 41, 160-164.
- Gao, X.-G. and Zuo, Y. (2015) A Wideband Signal Reconstruction Method with Improved Channel Structure. Electronic Information Confrontation Technology, 30, 63-67.
- Zakaria, R. and Le Ruyet, D. (2012) A Novel Filter-Bank Multicarrier Scheme to Mitigate the Intrinsic Interference: Application to MIMO Systems. IEEE Transactions on Wireless Communications, 11, 2506-2517. https://doi.org/10.1109/TWC.2012.012412.110607
- Roldan, F.C., Lopez, P.A., Bascon, S.M. and Lawson, S.S. (2002) An Efficient and Simple Method for Designing Prototype Filters for Cosine-Modulated Pseudo-QMF Banks. IEEE Signal Pro-cessing Letters, 9, 29-31. https://doi.org/10.1109/97.988722
- Cruz Pedro, M. and Nuno, B.C. (2011) Wideband Be-havioral Model for Nonlinear Operation of Bandpass Sampling Receivers. IEEE Transactions on Microwave Theory and Techniques, 59, 1006-1015. https://doi.org/10.1109/TMTT.2010.2100406
- Kiran, G. and Chen, C.-I.H. (2011) A Hybrid Computing Platform Digital Wideband Receiver Design and Performance Measurement. IEEE Transactions on Instrumentation and Measure-ment, 60, 3956-3958. https://doi.org/10.1109/TIM.2011.2152590
- Tang, H., Zhao, C.H. and Zhang, C.Z. (2006) Design of Channel Receiver Based on Multiphase Filter Group. The Application of Science and Technology, 6, 0008-0003.
- Chen, T., Wang, Y. and Liu, Y. (2015) Lowed Transition Channel Channelized Receiver Based on Frequency Response Shielding. Journal of Jilin University, 45, 335- 340.
- Zhang, W.X. (2009) Research and Implementation of Digital Radar Receiver for Passive Radar Seeker. Harbin Engineering University, Harbin.
- Romero, D.E.T. (2015) High-Speed Multiplierless Frequency Response Masking (FRM) FIR Filters with Reduced Usage of Hardware Resources. Midwest Symposium on Circuits and Sys-tems, 1-4. https://doi.org/10.1109/MWSCAS.2015.7282049
- Wu, F.Z. and Villing, R. (2016) FPGA Based FRM GDFT Filter Banks. Irish Signals and Systems Conference, 1-6. https://doi.org/10.1109/ISSC.2016.7528473