Method of Distribution Network Resources after Restoration, the Networks MPLS-TE Use of Various Telecommunications Technologies to Construct Backbone Networks
- 1 Philadelphia University, Amman, Jordan
Abstract
The modern telecommunication system is characterized by the rapid improvement of information and communication technologies, such as the improvement in the data rate, power consumption and Quality of Service (QoS). Based on this development, the next generation network (NGN) is shaped. The NGN is represented by a packet transport network demarcated functions and services. To provide transport functions in NGN, using Multi-Protocol Label Switching (MPLS) technology, there are two main problems, which are multipath routing and traffic distribution, which are what this paper works with. Accordingly, this paper proposes a solution to these two problems using optimization procedures to find the shortest path Dijkstra and Bellman-Ford, which is characterized by a high-speed-oriented selection of a single shortest path between the source and the destination, based on several selected criteria related to the optimal use of the network resources. Solving the information flow distribution problems in large number of nodes network applying salesman procedure or having NP-completeness, causes significant time delay, which means that the proposed solution is not suitable for real time applications. Accordingly, for real time applications, there is a need to move to other methods based on the use of several independent shortest paths.
- Alhihi, M. (2017) Practical Routing Protocol Models to Improve Network Performance and Adequacy. Journal of Computer and Communications, 5, 114-124. https://doi.org/10.4236/jcc.2017.56007
- El-Hihi, M., Attar, H., Solyman, A.A.A. and Stankovic, L. (2016) Network Coding Cooperation Performance Analysis in Wireless Network over a Lossy Channel, M Users and a Destination Scenario. Communications and Network, 8, 257-280. https://doi.org/10.4236/cn.2016.84023
- Attar, H. (2016) Physical Layer Deterministic Network Coding Using PUM Turbo Codes over AWGN Channel, N Nodes through a Base Station Scenario. Communications and Network, 8, 241-256. https://doi.org/10.4236/cn.2016.84022
- Attar, H., Stankovic, L., Alhihi, M. and Ameen, A. (2014) Deterministic Network Coding over Long Term Evaluation Advance Communication System. 2014 Fourth International Conference on Digital Information and Communication Technology and its Applications (DICTAP), Bangkok, 6-8 May 2014, 56-61. https://doi.org/10.1109/DICTAP.2014.6821657
- Khosravi, M.R., Basri, H. and Rostami, H. (2016) A Solution for Scalable Routing in Depth Divisions-Based DUSNs via Adding a Scalable Parameter to Control Depth Clusters: Creating an Energy Efficient and Low Delay NI-Independent Communication Protocol. Journal of Computer and Communications, 4, 55-61. https://doi.org/10.4236/jcc.2016.47008
- Attar, H., Stankovic, L. and Stankovic, V. (2012) Cooperative Network-Coding System for Wireless Sensor Networks. IET Communications, 6, 344-352.
- Attar, H.H. and Stankovic, L. and Stankovic, V.M. (2009) Physical-Layer Network Coding Based on PUM Turbo Codes. 3rd Mosharaka International Conference on Communications, Signals and Coding, 19-21 November 2009.
- Carrier Sense Multiple Access with Collision Detection (CSMA/CD) (2005) Access Method and Physical Layer Specifications. Standard IEEE-802.3.
- Olifer, V.G. and Olifer, N.A. (2006) Computer Networks. Principles, Technologies, Protocols: Textbook for High Schools. 3rd Edition, Peter, St. Petersburg, 958c.: ill.
- Tsiang, D. and Suwala, G. (2000) The Cisco SRP MAC Layer Protocol. RFC-2892.
- Resilient Packet Ring (RPR) (2004) Access Method and Physical Layer Specifications. Standard IEEE-802.17.
- Thompson, K., Miller, G.J. and Wilder, R. (1997) Wide-Area Internet Traffic Patterns and Characteristics. IEEE Networks, 11, 10-23. https://doi.org/10.1109/65.642356