Exploring Trends in Microcrack Properties of Sedimentary Rocks: An Audit of Dry and Water Saturated Sandstone Core Velocity–Stress Measurements — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Exploring Trends in Microcrack Properties of Sedimentary Rocks: An Audit of Dry and Water Saturated Sandstone Core Velocity–Stress Measurements
Stress dependent rock physics models are being used more routinely to link mechanical deformation and stress perturbations to changes in seismic velocities and seismic anisotropy. In this paper, we invert for the effective non-linear microstructural parameters of 69 dry and saturated sandstone core samples. We evaluate the results in terms of the model input parameters of two non-linear rock physics models: A discrete and an analytic microstructural stress-dependent formulation. The results for the analytic model suggest that the global trend of the initial crack density is lower and initial aspect ratio is larger for the saturated samples compared to the corresponding dry samples. The initial aspect ratios for both the dry and saturated samples are tightly clustered between 0.0002 and 0.001, whereas the initial crack densities show more scatter. The results for the discrete model show higher crack densities for the saturated samples when compared to the corresponding dry samples. With increasing confining stress the crack densities decreases to almost identical values for both the dry and saturated samples. A key result of this paper is that there appears to be a stress dependence of the compliance ratio B N /B T within many of the samples, possibly related to changing microcrack geometry with increasing confining stress. Furthermore, although the compliance ratio B N /B T for dry samples shows a diffuse distribution between 0.4 and 2.0, for saturated samples the distribution is very tightly clustered around 0.5. As confining stresses increase the compliance ratio distributions for the dry and saturated samples become more diffuse but still noticeably different. This result is significant because it reaffirms previous observations that the compliance ratio can be used as an indicator of fluid content within cracks and fractures. From a practical perspective, an overarching purpose of this paper is to investigate the range of input parameters of the microstructural models under both dry and saturated conditions to improve prediction of stress dependent seismic velocity and anisotropy observed in time-lapse seismic data due to hydro-mechanical effects related to fluid production and injection.
C. Sayers, “Stress-Dependent Elastic Anisotropy of Sandstones,” Geophysical Prospecting, Vol. 50, No. 1, 2002, pp. 85-95. doi:10.1046/j.1365-2478.2002.00289.x
S. Hall, J.-M. Kendall, J. Maddock and Q. Fisher, “Crack Density Tensor Inversion for Analysis of Changes in Rock Frame Architecture,” Geophysical Journal International, Vol. 173, No. 2, 2008, pp. 577-592. doi:10.1111/j.1365-246X.2008.03748.x
J. Verdon, D. Angus, J.-M. Kendall and S. Hall, “The Effects of Microstructure and Nonlinear Stress on Anisotropic Seismic Velocities,” Geophysics, Vol. 73, No. 4, 2008, pp. D41-D51.
M. S. King, “Recent Developments in Seismic Rock Properties,” International Journal of Rock Mechanics and Mining Sciences, Vol. 46, No. 8, 2009, pp. 1341-1348. doi:10.1016/j.ijrmms.2009.04.008
P. N. J. Rasolofosaon, “Unified Phenomenological Model for the Mechanical Behaviour of Rocks,” Geophysics, Vol. 74, No. 5, 2009, pp. WB107-WB116.
D. A. Angus, J. P. Verdon, Q. J. Fisher and J.-M. Kendall, “Exploring Trends in Microcrack Properties of Sedimentary Rocks: An Audit of Dry-Core Velocity-Stress Measurements,” Geophysics, Vol. 74, No. 5, 2009, pp. E193- E203.
D.-H. Han, “Effects of Porosity and Clay Content on Acoustic Properties,” Ph.D. Thesis, Stanford University, Stanford, 1986.
K. E.-A. Van Den Abeele, J. Carmeliet, P. A. Johnson and B. Zinszner, “Influence of Water Saturation on the Nonlinear Elastic Mesoscopic Response in Earth Materials and the Implications to the Mechanism of Nonlinearity,” Journal of Geophysical Research, Vol. 107, No. B6, 2002, p. 2121. doi:10.1029/2001JB000368
S. Tod, “The Effects of Stress and Fluid Pressure on the Anisotropy of Interconnected Cracks,” Geophysical Journal International, Vol. 149, No. 1, 2002, pp. 149-156. doi:10.1046/j.1365-246X.2002.01626.x
B. Gurevich, D. Makarynska and M. Pervukhina, “Are Penny-Shaped Cracks a Good Model for Compliant Porosity,” In: Technical Programme Committee John Castagna, Ed., SEG Houston 2009 International Exposition Annual Meeting, 25 October 2009, Houston, Texas.
P. Hatchell and S. Bourne, “Rocks under Strain: Strain- Induced Time-Lapse Time Shifts Are Observed for Depleting Reservoirs,” The Leading Edge, Vol. 24, No. 12, 2005, pp. 1222-1225. doi:10.1190/1.2149624
R. Prioul, A. Bakulin and V. Bakulin, “Nonlinear Rock Physics Model for Estimation of 3D Subsurface Stress in Anisotropic Formations: Theory and Laboratory Verification,” Geophysics, Vol. 69, No. 2, 2004, pp. 415-425.
J. Herwanger and S. Horne, “Predicting Time-Lapse Stress Effects in Seismic Data,” The Leading Edge, Vol. 12, 2005, pp. 1234-1242.
R. F. Fuck and I. Tsvankin, “Analysis of the Symmetry of a Stressed Medium Using Nonlinear Elasticity,” Geophysics, Vol. 74, No. 5, 2009, 9 p.
A. Bakulin, I. Tsvankin and V. Grechka, “Estimation of Fracture Parameters Fromreflection Seismic Data—Part I: HTI Model due to a Single Fracture Set,” Geophysics, Vol. 65, No. 6, 2000, pp. 1788-1802.
S. Shapiro, “Elastic Piezosensitivity of Porous and Fractured Rocks,” Geophysics, Vol. 68, No. 2, 2003, pp. 482- 486.
S. Shapiro and A. Kaselow, “Porosity and Elastic Anisotropy of Rocks under Tectonic Stress and Pore-Pressure Changes,” Geophysics, Vol. 70, 2005, pp. N27-N38.
R. Zimmerman, W. Somerton and M. King, “Compressibility of Porous Rocks,” Journal of Geophysical Research, Vol. 91, No. B12, 1986, pp. 12765-12777. doi:10.1029/JB091iB12p12765
C. Sayers and M. Kachanov, “Microcrack-Induced Elastic Wave Anisotropy of Brittle Rocks,” Journal of Geophysical Research, Vol. 100, No. B3, 1995, pp. 4149-4156. doi:10.1029/94JB03134
M. Schoenberg and C. Sayers, “Seismic Anisotropy of Fractured Rock,” Geophysics, Vol. 60, No. 1, 1995, pp. 204-211.
J.-M. Kendall, Q. Fisher, S. Crump, J. Maddock, A. Carter, S. Hall, J. Wookey, S. Valcke, M. Casey, G. Lloyd and W. Ismail, “Seismic Anisotropy as an Indicator of Reservoir Quality in Siliciclastic Rocks,” Structurally Complex Reservoirs, Geological Society of London, London, 2007, pp. 123-136.
C. Sayers and D.-H. Han, “The Effect of Pore Fluid on the Stress-Dependent Elastic Wave Velocities in Sandstones,” 72nd Annual International Meeting, Society of Exploration Geophysicists, Salt Lake City, 6-11 October 2002, pp. 1842-1845.
R. Dean, X. Gai, C. Stone and S. Minkoff, “A Comparison of Techniques for Couplingporous Flow and Geomechanics,” Society of Petroleum Engineering Reservoir Simulation Symposium, Houston, 3-5 February 2003, p. 9.
J. Herwanger and S. Horne, “Linking Reservoir Geomechanics and Time-Lapse Seismics: Predicting Anisotropic Velocity Changes and Seismic Attributes,” Geophysics, Vol. 74, No. 4, 2009, p. W13.
R. F. Fuck, A. Bakulin and I. Tsvankin, “Theory of Travel Time Shifts around Compacting Reservoirs: 3D Solutions for Heterogeneous Anisotropic Media,” Geophysics, Vol. 74, No. 1, 2009, p. D25.
A. Schubnel and Y. Gueguen, “Dispersion and Anisotropy of Elastic Waves in Cracked Rocks,” Journal of Geophysical Research, Vol. 108, No. B2, 2003, p. 15. doi:10.1029/2002JB001824
V. Grechka and M. Kachanov, “Effective Elasticity of Fractured Rocks,” The Leading Edge, Vol. 25, No. 2, 2006, pp. 152-155. doi:10.1190/1.2172305
M. Sambridge, “Geophysical Inversion with a Neighbourhood Algorithm I. Searching a Parameter Space,” Geophysical Journal International, Vol. 138, No. 2, 1999, pp. 479-494. doi:10.1046/j.1365-246X.1999.00876.x
M. Schoenberg, “Acoustic Characterization of Underground Fractures,” 68th Annual International Meeting, Society of Exploration Geophysicists, New Orleans, 13-18 September 1998, pp. 1624-1626.
E. Liu, J. A. Hudson and T. Pointer, “Equivalent Medium Representation of Fractured Rock,” Journal of Geophysical Research, Vol. 105, No. B5, 2000, pp. 2981-3000. doi:10.1029/1999JB900306
R. Lubbe, J. Sothcott, M. Worthington and C. McCann, “Laboratory Estimates of Normal and Shear Fracture Compliance,” Geophysical Prospecting, Vol. 56, No. 2, 2008, pp. 239-247.
L. J. Pyrak-Nolte, “Seismic Visibility of Fractures,” Ph.D. Thesis, University of California, Berkeley, 1988.
M. Grochau and B. Gurevich, “Investigation of Core Data Reliability to Support Time-Lapse Interpretation in Campos Basin, Brazil,” Geophysics, Vol. 73, No. 2, 2008, pp. E59-E65.
D. A. Angus, “A One-Way Wave Equation for Modelling Seismic Waveform Variations due to Elastic Heterogeneity,” Geophysical Journal International, Vol. 162, No. 3, 2005, pp. 882-892. doi:10.1111/j.1365-246X.2005.02695.x
P. J. Usher, D. A. Angus and J. P. Verdon, “Influence of Velocity Model and Source Frequency on Microseismic Waveforms: Some Implications for Microseismic Locations,” Geophysical Prospecting, in Press.
J. B. Walsh, “The Influence of Microstructure on Rock Deformation,” In: E. T. Brown, Ed., Comprehensive Rock Engineering. Principles, Practice and Projects, Pergamon Press, Oxford, 1993.
T.-F. Wong and W. F. Brace, “Thermal Expansion of Rocks: Some Measurements at High Pressure,” Tectonophysics, Vol. 57, No. 2-4, 1979, pp. 95-117. doi:10.1016/0040-1951(79)90143-4
T.-F. Wong, “Micromechanics of Faulting in Westerly Granite,” International Journal of Rock Mechanics and Mining Sciences, Vol. 19, No. 2, 1982, pp. 49-64. doi:10.1016/0148-9062(82)91631-X
P. Wessel and W. Smith, “Free Software Helps Map and Display Data,” EOS Transactions, Vol. 72, No. 41, 1991, pp. 445-446. doi:10.1029/90EO00319