Numerical and Geophysical Tools Applied for the Prediction of Mine Induced Seismicity in French Coalmines
- 1 Institut National de l’Environnement Industriel et des Risques
Abstract
The determination of the influence of mining works and the induced seismicity is essentially obtained, separately from in-situ observations and seismic analysis, field measurements (particularly surface survey) as well as from numerical investigations. The paper presents a methodology applied for the analysis of induced seismicity due to underground coalmines based on combining numerical modelling and seismic analysis. The methodology is based on the comparing between the observations, the seismic activity and the numerical modelling for establishing a close correlation between the location of seismic activity and the induced stresses. The paper presents two case studies using seismic and geotechnical investigations, the first one concerns a fatal accident affected Lorraine coalmine (East France). The second case concerns the application of the methodology on Provence coalmines (South France). The application of the methodology shows such a coupling can be an efficient way for detecting areas subjected to rockburst hazard. This is also a powerful tool for assisting the planning of underground workings in complex geological and mining conditions. The coupling of geotechnical investigations (numerical modelling, in-situ stress measurements) and seismic analysis are strongly recommended.
- N. G. W. Cook, “Seismicity Induced by Mining,” Engineering Geology, Vol. 10, No. 2-4, 1976, pp. 99-122. doi:10.1016/0013-7952(76)90015-6
- Z. T. Bieniawski, “Strata Control in Mineral Engineering,” Netherland Rotterdam, Balkama, 1987, pp. 111-133.
- W. D. Ortlepp, “RaSiM Comes of Age—A Review of the Contribution to the Understanding and Control of Mine Rockbursts SRK Consulting,” Johannesburg, 1997.
- M. R. Hudyma, “Mining-Induced Seismicity in Underground, Mechanised, Hardrock,” 2004.
- A. M. Linkov, V. Zoubkov, Heib M., et al., “Computer Aided in Analysis of Stressed State and Rockburst Hazard in Veins and Coal Seams Influenced by Faults,” Proceedings of the 1st Southern African Rock Engineering Symposium, Johannesburg, 15-17 September 1997, pp. 44-55.
- M. Al Heib, “Numerical Modelling Applied to Dynamic Phenomena—2nd North American Rock Mechanics Symposium—June 1996—Numerical Modelling of Ground Burst Problems—Workshop Notes,” Mc Gill, Montreal, 1996, pp. 3-1 to 3-12.
- R. J. Durrheim, M. K. C. Roberts, A. T. Haile, T. O. Hagan, A. J. Jager, M. F. Handley, S. M. Spottiswoode and W. D. Ortlepp, “Factors Influencing the Severity of Rockburst Damage in South African Gold Mines,” Journal of the South African Institute of Mining and Metallurgy, Vol. 98, No. 1, 1998, pp. 53-58.
- G. Senfaute, M. Al Heib, J. P. Josien and J. F. Noirel “Detection and Monitoring of High Stress Concentration Zones Induced by Coal Mining Using Numerical and Microseismic Methods. Rockburst and Seismicity in Mines-South African Institute of Mining and Metallurgy,” 2001.
- G. Senfaute, P. Bigarréand J. P. Josin, “Real-Time Microseismic Monitoring; Automatic Wave Processing and Multilayered Velocity Model for Accurate Event Location,” Rock Mechanics in Petroleum Engineering, Delft, 29-31 August 1994, pp. 631-638. doi:10.2118/28106-MS
- M. D. G. Salamon, “Deformation of Stratified Rock Masses: A Laminated Model,” Journal of the Southern African Institute of Mining and Metallurgy, Vol. 91, No. 1, 1991, pp. 9-25.
- S. L. Crouch, 1979 “Computer Simulation of Mining in Faulted Ground,” Journal of the South African Institute on Mining and Metallurgy, Vol. 79, No. 1, pp. 159-173.
- G. Beer and B. A. Poulsen, “Efficient Numerical Modelling of Faulted Rock Using the Boundary Element Method,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 31, No. 5, 1993, pp. 485-506.