Lateral Stress Concentration in Localized Interlayer Rock Stratum and the Impact on Deep Multi-Seam Coal Mining
- 1 Department of Earth Resources Engineering, Faulty of Engineering, Kyushu University, Fukuoka, Japan
- 2 Department of Earth Resources Engineering, Faulty of Engineering, Kyushu University, Fukuoka, Japan
- 3 Department of Earth Resources Engineering, Faulty of Engineering, Kyushu University, Fukuoka, Japan
- 4 Department of Earth Resources Engineering, Faulty of Engineering, Kyushu University, Fukuoka, Japan
Abstract
To explore the impact of lateral stress concentration in interlayer rock stratum on the exploitation of protected coal seam, a field experiment was carried out in a multi-seam mining structure. Lateral stress redistribution and interlayer rock failure behavior were surveyed. Then an assistant numerical investigation was implemented to evolve the effect of liberated seam mining and its influence on stress reconstruction in surrounding rock mass. The cause of lateral stress concentration and its impact were discussed finally. Key findings turn out that a certain lateral stress increases in interlayer rock stratum and concentrates on its lower region. Lateral stress concentration and interlayer rock failure are interactional. The former is an inducing factor of the latter; the latter promotes the increase of concentration degree. Extent of lateral stress concentration increases to the maximum as seam distance is about 50 m. But the efficacy of liberated seam mining decreases as the seam spacing gets larger. Protected seam mining is then classified based upon the impact of lateral stress concentration, which helps to prevent the rock burst hazard and then to achieve a reliable mining in deep mines.
- B. B. Tati, “Multi-Seam Coal Mining,” Journal of The South African Institute of Mining and Metallurgy, Vol. 111, No. 4, 2011, pp. 231-242.
- S. Khare, Y. V. Rao, C. S. Murthy and H. Vardhan, “Multiple Seam Mining: A Critical Review,” Journal of Mines, Metals and Fuels, Vol. 54, No. 12, 2006, pp. 327-329.
- Z. K. Lin, J. P. Du, J. L. Xu and G. M. Feng, “The Coal Mining Method,” China University of Mining and Technology Press, Xuzhou, 2009.
- T. V. Lobanova, “Geomechanical State of the Rock Mass at the Tashtagol Mine in the Course of Nucleation and Manifestation of Rock Bursts,” Journal of Mining Science, Vol. 44, No. 2, 2008, pp. 146-154. http://dx.doi.org/10.1007/s10913-008-0028-8
- L. M. Dou and X. Q. He, “Theory and Technology of Rock Burst Prevention,” China University of Mining and Technology Press, Xuzhou, 2001.
- L. M. Dou and X. Q. He, “Mining Geophysics,” China Science and Culture Press, Beijing, 2002.
- R. X. Shen, E. Y. Wang, Z. T. Liu and Z. H. Li, “Rockburst Prevention Mechanism and Technique of Close-Distance Lower Protective Seam Mining,” Journal of China Coal Society, Vol. 36, No. S1, 2011, pp. 63-67. (In Chinese)
- T. H. Yang, T. Xu, H. Y. Liu, C. A. Tang, B. M. Shi and Q. X. Yu, “Stress-Damage-Flow Coupling Model and Its Application to Pressure Relief Coal Bed Methane in Deep Coal Seam,” International Journal of Coal Geology, Vol. 86, No. 4, 2011, pp. 357-366. http://dx.doi.org/10.1016/j.coal.2011.04.002
- X. Q. Wu, L. M. Dou, C. G. Lv, A. Y. Cao and M. W. Zhang, “Research on Pressure-Relief Effort of Mining Upper-Protective Seam on Protected Seam,” Procedia Engineering, Vol. 26, 2011, pp. 1089-1096. http://dx.doi.org/10.1016/j.proeng.2011.11.2278
- D. A. Beck and B. H. Brady, “Evaluation and Application of Controlling Parameters for Seismic Events in Hard-Rock Mines,” International Journal of Rock Mechanics and Mining Sciences, Vol. 39, No. 5, 2002, pp. 633-642. http://dx.doi.org/10.1016/S1365-1609(02)00061-8
- Ministry of Coal Industry, “National Provisional Rules of Safe Mining in Rock Burst Seam,” 1987.
- W. Yang, B. Q. Lin, Y. A. Qu, Z. W. Li, C. Zhai, L. L. Jia and W. Q. Zhao, “Stress Evolution with Time and Space during Mining of a Coal Seam,” International Journal of Rock Mechanics and Mining Sciences, Vol. 48, No. 7, 2011, pp. 1145-1152. http://dx.doi.org/10.1016/j.ijrmms.2011.07.006