Reducing Greenhouse Gas Emission from the Neodymium Oxide Electrolysis. Part II: Basics of a Process Control Avoiding PFC Emission
- 1 RWTH Aachen University, IME Institute of Process Metallurgy and Metal Recycling Intzestraße 3, Aachen, Germany
- 2 RWTH Aachen University, IME Institute of Process Metallurgy and Metal Recycling Intzestraße 3, Aachen, Germany
Abstract
The neodymium electrolysis produces unnecessary high emission of CF 4 and C 2 F 6 . These perfluorocarbons (PFC <sub> s </sub> ) are potent greenhouse gases and are not filtered or destroyed in the off-gas. A process control in analogy to the aluminum electrolysis can reduce the PFC emission to a great extend and keep the process in a green process window. Therefore, a theoretical analysis is done of the cell voltage of the industrial neodymium electrolysis in dependence on the neodymium oxide concentration in the electrolyte. The analysis shows the different contributions to the cell voltage focusing on the impact of the anodic overvoltage on the cell voltage, by which the electrolysis process can be controlled. The model of the cell voltage is evaluated by laboratory neodymium electrolysis with a similar setup as the industrial cell. The relation of the oxide concentration, the anodic current density and the cell voltage with the cell resistance are measured. The continuous off-gas measurements show the gas concentration and PFC emissions. The effect of Nd 2 O 3 feeding on the galvanostatic electrolysis is analyzed as well. Based on the results a process control strategy is proposed similar to the aluminum electrolysis strategy. The green process window is in a narrow oxide concentration range, making a continuous and precise oxide feeding essential.
- Vogel, H. and Friedrich, B. (2015) Development and Research Trends of the Neodymium Electrolysis—A Literature Review. Proceedings of the 8th European Metallurgical Conference, Duesseldorf, 14-17 June 2015.
- Zhang, Z., et al. (2001) Present Situation and Latest Progress of Process for Producing Metallic Neodymium by Electrolysis of Neodymium Oxide with Fluoride Salts: Translated from Chinese by Pan Q. Non-Ferrous Smelting, 30, 23-25.
- Kingsnorth, D. (2015) The Global Rare Earth Industry Today—Plagued by Illegal Production in China. 11th International Rare Earth Conference, Singapore.
- Hall, C. (2009) Key Greenhouse Gases and Global Warming Potentials. http://www.ipcc.ch/publications_and_data/publications_ipcc_fourth_assessment_report_wg1_ report_the_physical_science_basis.htm
- Vogel, H., Flerus, B., Stoffner, F. and Friedrich, B. (2017) Reducing Greenhouse Gas Emission from the Neodymium Oxide Electrolysis: Part I: Analysis of Anodic Gas Formation. Journal of Sustainable Metallurgy, 3, 99-107. https://doi.org/10.1007/s40831-016-0086-0
- Schneller, M. (2010) In Situ Cell Control. Light Metals, 2010, 563-568.
- Iffert, M. (2007) Aluminium Smelting Cell Control and Optimisation. Doctoral Thesis, The University of New South Wales.
- Guo, X., Sietsma, J. and Yang, Y. (2014) Solubility of Rare Earth Oxides in Molten Fluorides. ERES2014, 149-155.
- Vogt, H. and Thonstad, J. (2002) The Voltage of Alumina Reduction Cells Prior to the Anode Effect. Journal of Applied Electrochemistry, 32, 241-249. https://doi.org/10.1023/A:1015533928104
- Vogt, H. (2013) On the Various Types of Uncontrolled Potential Increase in Electrochemical Reactors—The Anode Effect. Electrochimica Acta, 87, 611-618.
- Vogt, H. and Thonstad, J. (2002) The Complex Mechanisms Inducing Anode Effects in Aluminium Electrolysis. Light Metals, 2002, 495-501.
- Liu, K.R., et al. (2001) Theoretical Decomposition Voltage for Some Related Substance on Neodymium Electrolysis: Translated from Chinese by Pan Q. Chinese Rare Earths, 22, 30-33.
- Liu, K.R., et al. (2003) Study of Anodic Overvoltage in Neodymium Electrolysis. Acta Metallurgica Sinica, 16, 355-359.
- Vogt, H. (1980) On the Supersaturation of Gas in the Concentration Boundary Layer of Gas Evolving Electrodes. Electrochimica Acta, 25, 527-531.