Manufacturing and Thermal Performance Test of (Compound) Solar Collector in Damascus City
- 1 Department of Mechanics, Faculty of Mechanical and Electrical Engineering, Damascus University, Damascus, Syria
- 2 National Energy Research Centre, Damascus, Syria
- 3 Department of Mechanics, Faculty of Mechanical and Electrical Engineering, Damascus University, Damascus, Syria
Abstract
Solar water collectors that uses for domestic and industrial applications within temperature up to, are classified under two main types: Flat Plate collector (FP), and Evacuated Tube collector (ET). Thermal performance test results showed that each type have different thermal features. Comparison between (FP & ET) collectors showed that they could take advantages of different thermal features of two types when they work in the same climatic conditions and overlap of these thermal features when they work in different operational conditions. They can take advantage of these features through (compound) solar collector. Compound solar water Collector (CO) composed of a part of flat plate collector shape (FP), and a part of evacuated tube collector shape (ET). Booth have equal reference area, and connected together to be as one Solar collector (CO). Water entered first flat part (FP), then evacuated tube part (ET) then to tank or end-use. In this paper, present design and manufacturing as well the thermal performance test of (compound) solar collector, according to Standard Specification of tests, was EN12975:2001. Mechanical test for (CO) collector conducted successfully according to durability, reliability, and safety requirements. In addition, thermal performance was tested in steady state at the climatic conditions of Damascus city, and concluded the thermal performance of (FP & ET) that constitute (CO) collector. The results showed enhancement of thermal performance.
- Duffie, J. and Beckman, W. (2000) Solar Engineering of Thermal Processes. 3nd Edition, John Wiley & Sonce, INC, New York City.
- Abdalla, F.K. (2005) Modeling and Assessment of an Experimental Combined Evacuat-ed-Tubes-Direct-Flat-Plate Solar Heater, Advanced Energy Centre, Bryndwr, Christchurch, New Zealand.
- Zambolin, E., et al. (2010) Experimental Analysis of Thermal Performance of Flat Plate and Evacuated Tube Solar Collectors in Stationary Standard and Daily Conditions. Solar Energy, 84, 1382-1396. http://dx.doi.org/10.1016/j.solener.2010.04.020
- Munish, K. (2014) Latest Evolutions in Flat Plate Solar Collectors Technology. International Journal of Mechanical Engineering, 1.
- Wang, Z., et al. (2015) Solar Water Heating: From Theory, Application, Marketing and Research. Renewable and Sustainable Energy Reviews, 41, 68-84. http://dx.doi.org/10.1016/j.rser.2014.08.026
- Jouhari, M.S., et al. (2014) Thermal Performance test of Two Types of Solar Collectors and Compare Them Under Climatic Conditions of the City of Damascus. Damascus University, Journal for Engineering Science. Paper Approved for Publishing (1574), 14-9-2014.
- EN12975-2 (2001) Thermal Solar Systems and Components, Solar Collector Part 2: Test Methods.
- IS/ISO 9488 (1999) Solar Energy—Vocabulary. Bureau of Indian Standard, April 2010.
- GB/T 17049 (2005) Chinese Standard for Technical Specifications, Testing Methods and Testing Rules, for All-Glass Evacuated Solar Collector Tubes.
- EN12975-1 (2001) Thermal Solar Systems and Components, Solar Collector Part 1: General Requirements.
- Jouhari, M.S., et al. (2014) Thermal Performance Evaluation of (Compound) Solar Collector for Solar Water Heating under Climate Condition of Damascus. Damascus University, Journal for Engineering Science. Paper approved for publishing (1632), 21-9-2014.