Preparation and properties of cast polyurethane elastomers with molecularly uniform hard segments based on 2,4-toluene diisocyanate and 3,5-dimethyl-thioltoluenediamine

Abstract

A series of three cast polyurethane elastomers were prepared from 2,4-toluene diisocyanate (TDI) and 3,5-dimethyl-thioltoluenediamine (D MTDA) chain extender, with polyethylene adi-pate (PEA), polyoxytetramethylene glycol (PTMG) and polycaprolactone (PCL) soft seg-ments. The polyol molecular weights em-ployed was 2000g/mol. The polyurethane elastomers were characterized by an elec-tronmechanical universal testing machine, an Akron abrasion loss tester, a LX-A Shore du-rometer, a rebound resilience equipment and a Dynamic- Mechanical analyzer. In addition, fractured surface of the polyurethane elas-tomers was investigated by a field emission scanning electron microscopy (SEM). The test results showed the PCL based elastomer ex-hibits the excellent tear and stress-strain properties that polyester based elastomers offer, while retaining superior compression set and resilience similar to polyether based elas-tomers. The static and dynamic properties of the PCL based elastomer were more suitable for dynamic applications. The SEM micro-graphs of all polyurethane samples indicated the existing of the microphase separation structure. Particles of the dispersed phase formed by the hard phase and crystalline part of the soft phase grows bigger with the in-creasing crystallinity of the soft segments. The hard domains are irregular shapes and with the sizes of a few micrometers.