Fabrication of trace elements incorporated apatite coating could combine the ions’ pharmaceutical effect into the materials. In this study, strontium, silicon, and fluoride ions have been incorporated into apatite coatings through a biomineralization method, which mimics an in vitro mineralization process. The surface composition is tested with X-ray diffraction and X-ray photoelectron spectroscopy, and the surface morphology is characterized with scanning electron microscopy. Compared with pure hydroxyapatite coating, the strontium, silicon, and fluoride substituted apatite coatings show different morphology as spherical, needle-like, and nano-flake-like, individually. The crystal size of these biomimetic hydroxyapatite coatings decreased after ion substitution. The results of the analysis of surface composition present the ion substitutions are increased with the increasing of ion concentrations in the soaking solution. That means the ion incorporation into the apatite structure based on the biomineralization method could not only vary the ion content in but also change the morphology of the apatite coatings. Herein, the role of ion substitution is considered from the point of view of materials science at the micro structural and surface chemistry levels.
L. L. Hench, “Bioceramics: From Concept to Clinic,” Journal of the American Ceramic Society, Vol. 74, No. 7, July 1991, pp. 1487-1510.
T. Kokubo, “Bioceramics and Their Clinical Applications,” CRC Press, USA, 2008.
J. E. Ellingsen and S. P. Lyngstadaas, “Bio-Implant Interface: Improving Biomaterials and Tissue Reactions” CRC Press, USA, 2003.
R. Batzer, Y. Liu, D. L. Cochran, S. Szmuckler-Moncler, D. D. Dean, B. D. Boyan and Z. Schwartz, “Prostaglandins Mediate the Effects of Titanium Surface Roughness on MG63 Osteoblast-Like Cells and Alter Cell Responsiveness to 1 Alpha,25-(OH)2D3,” The Journal of Biomedical Materials Research, Vol. 41, No. 3, September 1998, pp. 489-496.
C. H. Lohmann, J. R. Sagun, V. L. Sylvia, D. L. Cochran, D. D. Dean, B. D. Boyan and Z. Schwartz, “Surface Roughness Modulates the Response of MG63 Osteoblast-Like Cells to 1,25-(OH)(2)D(3) Through Regulation of Phospholipase A(2) Activity and Activation of Protein Kinase A,” The Journal of Biomedical Materials Research, Vol. 47, No. 2, November 1999, pp. 139-151.
A. S. G. Curtis, “Small is Beautiful but Samller is the Aim: Review of a Life of Research,” Europe Cell & Mater, Vol. 8, No. 22, October 2004, pp. 27-36.
A. S. G. Curtis and P. Clark, “The Effect of Topographic and Mechanical Properties of Materials on Cell Behaviour,” Critical Reviews in Biocompatibility, Vol. 5, 1990, pp. 343-362.
L. Chou, J. D. Firth, V.-J. Uitto and D. M. Brunette, “Substratum Surface Topography Alters Cell Shape and Regulates Fibronectin mRNA level MRNA Stability Secretion and Assembly in Human Fibroblastes,” Journal of Cell Science, Vol. 108, April 1995, pp. 1563-1573.
M. Vallet-Regí, “Ceramics for Medical Applications,” Journal of Chemical Society, Dalton Transactions, 2001, pp. 97-108.
F. H. Lin, Y. S. Hsu, S. H. Lin and J. S. Sun, “The Effect of Ca/P Concentration and Temperature of Simulated Body Fluid on the Growth of Hydroxyapatite Coating on Alkali-Treated 316L Stainless Steel,” Biomaterials, Vol. 23, No. 19, October 2002, pp. 4029-4038.
X. Liu, P. Chu and C. X. Ding, “Surface Modification of Titanium, Titanium Alloys, and Related Materials for Biomedical Application,” Materials Sciences and Engineering Report, Vol. 47, No. 3-4, December 2004, pp. 49-121.
L. Sun, C. C. Berndt, K. A. Gross and A. Kucuk, “Material Fundamentals and Clinical Performance of Plasma-Sprayed Hydroxyapatite Coatings: A Review,” The Journal of Biomedical Materials Research, Vol. 58, No. 5, 2001, pp. 570-592.
H. Oonishi, L. Hench, J. Wilson, F. Sugihara, E. Tsuji, M. Matsuura, S. Kin, T. Yamamoto and S. Mizokawa, “Quantitative Comparison of Bone Growth Behavior in Granules of Bioglass, A-W Glass-Ceramic, and Hydroxyapatite,” The Journal of Biomedical Materials Research, Vol. 51, No. 1, July 2000, pp. 37-46.
D. Knaack, M. E. P. Goad, M. Aiolova, C. Rey, A. Tofighi, P. Chakravarthy and D. D. Lee, “Resorbable Calcium Phosphate Bone Substitute,” The Journal of Biomedical Materials Research, Vol. 43, No. 4, 1998, pp. 399-409.
C. P. A. T. Klein, A. A. Driessen, K. d. Groot and V. D. Hoof, “Biodegradation Behavior of Various Calcium Phosphate Materials in Bone Tissue,” The Journal of Biomedical Materials Research, Vol. 17, No. 5, September 1983, pp. 769-784.
C. Ergun, T. J. Webster, R. Bizios and R. H. Doremus, “Hydroxylapatite with Substituted Magnesium, Zinc, Cadmium, and Yttrium. I. Structure and Microstructure,” The Journal of Biomedical Materials Research Part A, Vol. 59, No. 2, February 2002, pp. 305-311.
R. A. Young and P. E. Mackie, “Crystallography of Human Tooth Enamel: Initial Structure Refinement,” Materials Research Bulletin, Vol. 15, No. 1, January 1980, pp. 17-29.
Z. Y. Li, W. M. Lam, C. Yang, B. Xu, G. X. Ni, S. A. Abbah, K. M. C. Cheung, K. D. K. Luk and W. W. Lu, Chemical Composition, Crystal Size and Lattice Structural Changes after Incorporation of Strontium into Biomimetic Apatite,” Biomaterials, Vol. 28, No. 7, March 2007, pp. 1452- 1460.
E. Canalis, M. Hott, P. Deloffre, Y. Tsouderos and P. J. Marie, “The divalent Strontium Salt S12911 Enhances Bone Cell Replication and Bone Formation in vitro,” Bone, Vol. 18, No. 6, June 1996, pp. 517-523.
J. Christoffersen, M. R. Christoffersen, N. Kolthoff and O. Barenholdt, “Effects of Strontium Ions on Growth and Dissolution of Hydroxyapatite and on Bone Mineral Detection,” Bone, Vol. 20, No. 1, January 1997, pp. 47-54.
A. M. Pietak, J. W. Reid, M. J. Stott and M. Sayer, “Silicon substitution in the Calcium Phosphate Bioceramics,” Biomaterials, Vol. 28, No. 28, October 2007, pp. 4023- 4032.
C. Robinson, R. C. Shore, S. J. Brookes, S. Strafford, S. R. Wood and J. Kirkham, “The Chemistry of Enamel Caries,” Critical Reviews in Oral Biology and Medicine, Vol. 11, No. 4, 2000, pp. 481-495.
Y. Wang, S. Zhang, X. Zeng, L. L. Ma, W. Weng, W. Yan and M. Qian, “Osteoblastic Cell Response on Fluoridated Hydroxyapatite Coatings,” Acta Biomater, Vol. 3, No. 2, March 2007, pp. 191-197.
E. Zhang and C. Zou, “Porous Titanium and Silicon-Sub- Stituted Hydroxyapatite Biomodification Prepared by a Biomimetic Process: Characterization and In vivo Evaluation,” Acta Biomater, Vol. 5, No. 5, June 2009, pp. 1732-1741.
W. Xue, H. L. Hosick, A. Bandyopadhyay, S. Bose, C. Ding, K. D. K. Luk, K. M. C. Cheung and W. W. Lue, “Preparation and Cell–Materials Interactions of Plasma Sprayed Strontium-Containing Hydroxyapatite Coating,” Surface & Coatings Technology, Vol. 201, No. 8, January 2007, pp. 4685-4693.
G. Qi, S. Zhang, K. A. Khora, W. Weng, X. Zeng and C. Liu, “An Interfacial Study of Sol–Gel-Derived Magnesium Apatite Coatings on Ti6Al4V Substrates,” Thin Solid Films, Vol. 516, No. 16, June 2008, pp. 5172-5175.
E. S. Thian, J. Huang, S. M. Best, Z. H. Barber and W. Bonfield, “Novel Silicon-Doped Hydroxyapatite (Si-HA) for Biomedical Coatings: An In vitro Study Using Acellular Simulated Body Fluid,” The Journal of Biomedical Materials Research Part B: Appl Biomater, Vol. 76, No. 2, February 2006, pp. 326-333.
E. L. Solla, P. Gonzalez, J. Serra, S. Chiussi, B. Leon and J. G. Lopez, “Pulsed Laser Deposition of Silicon Substituted Hydroxyapatite Coatings from Synthetical and Biological Sources,” Applied Surface Science, Vol. 254, No. 4, December 2007, pp. 1189-1193.
Y. Han, D. H. Chen and L. Zhang, “Nanocrystallized SrHA/SrHA–SrTiO3/SrTiO3–TiO2 Multilayer Coatings Formed by Micro-Arc Oxidation for Photocatalytic Application,” Nanotechnology, Vol. 19, No. 33, July 2008, pp. 335-705.
H. B. Wen, J. R. D. Wijin, F. Z. Cui and K. D. Groot, “Preparation of Calcium Phosphate Caotings on Titanium Implant Materials by Simple Chemistry,” The Journal of Biomedical Materials Research, Vol. 41, No. 2, Auguest 1998, pp. 227-236.
J. Forsgren, F. Svahn, T. Jarmar and H. Engqvist, “Formation and Adhesion of Biomimetic Hydroxyapatite Deposited on Titanium Substrates,” Acta Biomaterialia, Vol. 3, No. 6, November 2007, pp. 980-984.
W. Xia, C. Lindahl, J. Lausmaa, P. Borchardt, A. Ballo, P. Thomsen and H. Engqvist, “Biomineralized Strontium Substituted Apatite/Titanium Dioxide Coating on Titanium Surfaces,” Acta Biomaterialia, Vol. 6, No. 4, April 2010, pp. 1591-1600.
D. V. Vasudev, J. L. Ricci, C. Sabatino, P. J. Li and J. R. Parsons, “In vivo Evaluation of a Biomimetic Apatite Coating Grown on Titanium Surfaces,” The Journal of Biomedical Materials Research Part A, Vol. 69, No. 4, June 2004, pp. 629-636.
F. He, G. Yang, X. Wang and S. Zhao, “Bone Responses to Rough Titanium Implants Coated with Bjiomimetic Ca-P in Rabbit Tibia,” The Journal of Biomedical Materials Research Part B, Vol. 90, No. 2, August 2009, pp. 857-863.
R. Hazan, R. Brener and U. Orun, “Bone-Growth to Metal Implants is Regulated by Their Surface Chemical Properties,” Biomaterials, Vol. 14, No. 8, July 1993, pp. 570-574.
A. Boyde, “Microstructure of Enamel,” Ciba doundation symposium 205- dental enamel, John Wiley & Sons, New York, 1997.
A. L. Oliveira, R. L. Reis and P. Li, “Strontium-Substituted Apatite Coating Grown on Ti6Al4V Substrate through Biomimetic Synthesis,” The Journal of Biomedical Materials Research Part B, Vol. 83, No. 1, October 2007, pp. 258-265.
J. Wang, Y. Chao, Q. Wan, Z. Zhu and H. Yu, “Fluoridated Hydroxyapatite Coatings on Titanium Obtained by Electrochemical Deposition,” Acta Biomaterialia, Vol. 5, No. 5, June 2009, pp. 1798-1807.
B. Bracci, P. Torricelli, S. Panzavolta, E. Boanini, R. Giardino and A. Bigi, “Effect of Mg2+, Sr2+, and Mn2+ on the Chemico-Physical and in vitro Biological Properties of Calcium Phosphate Biomimetic Coatings,” Journal of Inorganic Biochemistry, Vol. 103, No. 12, December 2009, pp. 1666-1674.