Preparation and Properties of Carrageenan-g-Poly(Acrylic Acid)/Bentonite Superabsorbent Composite
- 1
- 2
- 3
Abstract
A novel biopolymer-based superabsorbent hydrogel composite based on kappa-carrageenan (κC) have been prepared via graft copolymerization of acrylic acid (AA) in the presence of bentonite powder using methylenebisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. The hydrogel structure was confirmed using FTIR spectroscopy and the morphology of the samples was examined by scanning electron microscopy (SEM). The affecting variables onto graft polymerization (i.e. AA, MBA and APS concentration, as well as the bentonite amount) were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. The results of Brunauer–Emmett–Teller (BET) analysis showed that the average pore diameter of the synthesized hydrogel was 11.5 nm. The effect of various salt media and solutions with different pHs on the swelling of the superabsorbent was also studied.
- O. V. Khutoryanskaya, Z. A. Mayeva, G. A. Mun and V. V. Khutoryanskiy, Biomacromolecules, vol. 9, no. 12, 2008, pp.3353-3361.
- W. E. Hennink and C. F. van Nostrum, Adv. Drug Delivery Rev., vol. 54, no. 1, 2002, pp. 13-36.
- F. L. Buchholz and A. T. Graham, “Modern Superabsorbent Polymer Technology”, Wiley, New York, 1997.
- L. B. Peppas and R. S. Harland, “Absorbent Polymer Technology”, Elsevier, Amsterdam, 1990.
- R. Po, Water-absorbent polymers: a patent survey, J. Macromol. Sci.-Rev. Macromol Chem Phys, vol. 34, no. 4, 1994, 607-662.
- J. Kost, “Encyclopedia of Controlled Drug Delivery”, E. Mathiowitz, Ed., Wiley, New York, 1999, p. 445.
- N. A. Peppas and A. G. Mikes, “Hydrogels in Medicine and Pharmacy”, CRC Press, Boca Raton, Florida, vol. 1, 1986.
- J. P. Fisher, S. Jo, A. G. Mikos and A. H. Reddi, J Biomed Mater Res, vol. 71A, no. 2, 2004, pp. 268-274.
- S. J. Bryant, K. L. Durnad and K. S. Anseth, J Biomed Mater Res, vol. 67A, 2003, pp. 1430-1438.
- H. Omidian, J. G. Rocca and K. Park, J Contr Rel, vol. 102, no. 2, 2005, pp. 3-12.
- S. J. Smit, US Patent 5399591, 1995.
- R. Chambers, US Patent 5597873, 1997.
- A. Mitchell, US Patent 6376318, 2002.
- K. Kabiri and M. J. Zohuriaan-Mehr, Polym Adv Technol, vol. 14, no. 6, 2003, pp. 438-444.
- J. Lin, J. Wu, Z. Yang and M. Pu, Macromol Rapid Commun, vol. 22, 2001, pp. 422-424.
- J. Wu, J. Lin, G. Lin and C. Wei, Polym Int, vol. 50, 2001, pp. 1050-1053.
- K. Haraguchi, T. Takenisa and S, Fan S, Macromolecules, vol. 35, no. 27, 2002, pp. 10162-10171.
- K. Haraguchi and T. Takenisa, Adv Mater, vol. 14, 2002, pp. 1120-1128.
- Y. Liu, M. Zhu, X. Liu, W. Zhang, B. Sun and Y. Chen, Polymer, vol. 47, no. 14, 2006, pp. 4901-4908.
- K. Xu, J. Wang, S. Xiang, Q. Chen, Y. Yue, X. Su, Compos Sci Technol, vol. 67, 2007, pp. 3480-3486.
- V. D. Athawale and V. Lele, Starch/Starke, vol. 50, 1998, pp. 426-432.
- D. W. Lim, H. S. Whang and K. J. Yoon, J. Appl. Polym. Sci., vol. 79, 2003, pp. 1423–1430.