Morphological characteristics and proximate chemical analysis of E. binata showed it as a suitable raw material for writing and printing grade paper. Maximum pulp yield (43.58%) of kappa number 17.38 with 0.9% screening rejects was obtained at 12% of active alkali (as Na2O) pulping temperature 130°C, cooking time 120 min and solid to liquor ratio 1:4. During bio-soda pulping of E. binata , pulp yield decreased slightly while pulp brightness, tensile index, burst index and double fold numbers were improved by 4.1%, 24.94%, 14.03% and 48.45% respectively compared to soda pulping. During ethanol-soda pulping of E. binata, pulp yield, pulp brightness, tensile index, burst index and double fold numbers were improved by 3.9%, 6.6%, 32.18%, 35.40% and 77.31% respectively compared to soda pulping.
Tandon, R., Negi, S.D. and Mathur, R.M. (2013) Waste Paper Collection Mechanism in India—Current Status & Future Requirement. IPPTA Journal, 25, 37-40.
ITC (2011) Discussion Paper on Collection and Recycling of Waste Paper in India.
Hiloidhari, M., Das, D. and Baruah, D.C. (2014) Bioenergy Potential from Crop Residue Biomass in India. Renewable and Sustainable Energy Reviews, 32, 504-512. http://dx.doi.org/10.1016/j.rser.2014.01.025
IARI (2012) Crop Residues Management with Conservation Agriculture: Potential, Constraints and Policy Needs. Indian Agricultural Research Institute, New Delhi, vii+32.
Delgado-Aguilar, M., Tarrés, Q., Puig, J., Boufi, S., Blanco, á. and Mutjé, P. (2015) Enzymatic Refining and Cellulose Nanofiber Addition in Papermaking Processes from Recycled and Deinked Slurries. Bioresources, 10, 5730-5743. http://dx.doi.org/10.15376/biores.10.3.5730-5743
Dutt, D., Sharma, A.K., Agnihotri, S. and Gautam, A. (2012) Characterization of Dog Tooth Grass and Its Delignification by Soda Pulping Process. Journal of Science and Technology, 1, 434-447.
Shatalov, A.A. and Pereira, H., (2005) Arundo donax L. Reed: New Perspectives for Pulping and Bleaching. Part 4. Peroxide Bleaching of Organosolv Pulps. Bioresource Technoogy, 96, 865-872. http://dx.doi.org/10.1016/j.biortech.2004.09.005
Dutt, D., Upadhyaya, J.S., Tyagi, C.H., Kumar, A. and Lal, M. (2008) Studies on Ipomea carnea and Cannabis sativa as an Alternative Pulp Blend for Softwood: An Optimization of Kraft Delignification Process. Industrial Crops and Products, 28, 128-136. http://dx.doi.org/10.1016/j.indcrop.2008.02.001
Kaur, H., Dutt, D. and Tyagi, C.H. (2010) Optimization of Soda Pulping Process of Ligno-Cellulosic Residues of Lemon and Sofia Grasses Produced after Steam Distillation. Bioresources, 6, 103-120.
Kumar, L., Dutt, D. and Bharti, A. (2013) Delignification of Phragmites Karka—A Wetland Grass—By Soda Pulping Process. Bioresources, 8, 3426-3437. http://dx.doi.org/10.15376/biores.8.3.3426-3437
Madakadze, I.C., Masamvu, T.M., Radiotis, T., Li, J. and Smith, D.L. (2010) Evaluation of Pulp and Paper Making Characteristics of Elephant Grass (Pennisetum purpureum Schum) and Switchgrass (Panicum virgatum L.). African Journal of Environmental Science and Technology, 4, 465-470.
Sahin, H.T. (2003) Base-Catalyzed Organosolv Pulping of Jute. Journal of Chemical Technology and Biotechnology, 78, 1267-1273. http://dx.doi.org/10.1002/jctb.931
Yoon, S.H., Labosky Jr., P. and Blankenhorn, P.R. (1997) Ethanol-Kraft Pulping and Papermaking Properties of Aspen and Spruce. TAPPI Journal, 80, 203-210.
Sridach, W. (2010) The Environmentally Benign Pulping Process of Non-Wood Fibers. Suranaree Journal of Science and Technology, 17, 105-123.
Xu, Y., Li, K. and Zhang, M. (2007) Lignin Precipitation on the Pulp Fibers in the Ethanol-Based Organosolv Pulping. Colloids Surface A: Physiochemical and Engineering Aspects, 301, 255-263. http://dx.doi.org/10.1016/j.colsurfa.2006.12.078
Lei, W., Wangui, W., Xiang, J. and Lu, C. (2011) Biodegradation of Lignin by the White Rot Fungus Polyporus varius and Its Promising Potential for Biopulping. 2011 International Conference on Materials for Renewable Energy & Environment (ICMREE), Shanghai, 20-22 May 2011, 464-468.
Singh, P., Sulaiman, O., Hashim, R., Rupani, P.F. and Peng, L. (2010) Biopulping of Lignocellulosic Material Using Different Fungal Species: A Review. Reviews in Environmental Science and Biotechnolology, 9, 141-151. http://dx.doi.org/10.1007/s11157-010-9200-0
Luce, G.E. (1970) The Physics and Chemistry of Wood Pulp Fibers. STAP No. 8, TAPPI, New York.
Runkel, R.O. (1949) über die Herstellung von Zellstoff aus Holz der gattung Eucalyptus and Versuche mit zwei unterschiedlichen Eucalyptusarten. Das Papier, 3, 476-490.
Barefoot, A.C., Hitchings, R. and Ellwood, E. (1966) Wood Characteristics and Kraft Paper Properties of Four Selected Loblolly Pines (Pinus taeda) III. Effect of Fiber Morphology in Pulps Examined at a Constant Permanganate Number. TAPPI Journal, 49, 137-147.
Kaur, H. and Dutt, D. (2013) Anatomical, Morphological and Chemical Characterization of Lignocellulosic By-Products of Lemon And Sofia Grasses Obtained after Recuperation of Essential Oils by Steam Distillation. Cellulose Chemistry and Technology, 47, 83-94.
TAPPI (2007) Standard Test Methods, Technical Association of the Pulp and Paper Industry. TAPPI Press, Atlanta.
Gautam, A. (2015) Production and Characterization of Xylanases and Their Applications in Bleaching. PhD Thesis, Department of Paper Technology, IIT Roorkee, Roorkee.
Miller, G.L. (1959) Use of Dinitrosaiicyiic Acid Reagent for Determination of Reducing Sugar. Analytical Chemistry, 31, 426-428. http://dx.doi.org/10.1021/ac60147a030
Park, S., Baker, J., Himmel, M., Parilla, P. and Johnson, D. (2010) Cellulose Crystallinity Index: Measurement Techniques and Their Impact on Interpreting Cellulase Performance. Biotechnology for Biofuels, 3, 10. http://dx.doi.org/10.1186/1754-6834-3-10
Sharma, A.K., Dutt, D., Upadhyaya, J.S. and Roy, T.K. (2011) Anatomical, Morphological, and Chemical Characterization of Bambusa tulda, Dendrocalamus hamiltonii, Bambusa balcooa, Malocana baccifera, Bambusa arundinacea and Eucalyptus tereticornis. Bioresources, 6, 5062-5073.
Shakhes, J., Zeinaly, F., Marandi, M.A.B. and Saghafi, T. (2011) The Effects of Processing Variables on the Soda and Soda-AQ Pulping of Kenaf Bast Fiber. Bioresources, 6, 4626-4639.
Ververis, C., Georghiou, K., Christodoulakis, N., Santas, P. and Santas, R. (2004) Fiber Dimensions, Lignin and Cellulose Content of Various Plant Materials and Their Suitability for Paper Production. Industrial Crops and Products, 19, 245-254. http://dx.doi.org/10.1016/j.indcrop.2003.10.006
Ona, T., Sonoda, T., Ito, K., Shibata, M., Tamai, Y. and Kojima, Y., et al. (2001) Investigation of Relationships between Cell and Pulp Properties in Eucalyptus by Examination of Within-Tree Property Variations. Wood Science and Technology, 35, 229-243. http://dx.doi.org/10.1007/s002260100090
Rodríguez, A., Moral, A., Serrano, L., Labidi, J. and Jiménez, L. (2008) Rice Straw Pulp Obtained by Using Various Methods. Bioresources Technology, 99, 2881-2886. http://dx.doi.org/10.1016/j.biortech.2007.06.003
Lopez, F., Eugenio, M.E., Diaz, M.J., Nacimiento, J.A., Garcia, M.M. and Jimenez, L. (2005) Soda Pulping of Sunflower Stalks, Influence of Process Variables on the Resulting Pulp. Journal of Industrial Engineering Chemistry, 11, 387-394.
Nieschlag, H.J., Nelson, G.H., Wolff, J.A. and Perdue, R.E. (1960) A Search for New Fiber Crops. TAPPI Journal, 43, 193-201.
Abdul Khalil, H.P.S., Alwani, M.S., Ridzuan, R., Kamarudin, H. and Khairul, A. (2008) Chemical Composition, Morphological Characteristics, and Cell Wall Structure of Malaysian Oil Palm Fibers. Polymer-Plastic Technology and Engineering, 47, 273-280. http://dx.doi.org/10.1080/03602550701866840
Cao, S., Ma, X., Lin, L., Huang, F., Huang, L. and Chen, L. (2014) Morphological and Chemical Characterization of Green Bamboo (Dendrocalamopsis oldhami (Munro) Keng F.) for Dissolving Pulp Production. Bioresources, 9, 4528-4539. http://dx.doi.org/10.15376/biores.9.3.4528-4539
Ogunsile, B.O. and Quintana, G. (2010) Modeling of Soda-Ethanol Pulps from Carpolobia lutea. Bioresources, 5, 2417-2430.
Sarkanen, K.V. and Ludwig, C.H. (1971) Lignins: Occurrence, Formation, Structure and Reactions. Wiley-Interscience, New York, 639.
Reichardt, C. (1988) Solvents and Solvent Effects in Organic Chemistry. VCH Publishers, New York.
López, F., García, J.C., Pérez, A., García, M.M., Feria, M.J. and Tapias, R. (2010) Leucaena diversifolia a New Raw Material for Paper Production by Soda-Ethanol Pulping Process. Chemical Engineering Research and Design, 88, 1-9. http://dx.doi.org/10.1016/j.cherd.2009.06.016
Gumuskaya, E., Usta, M. and Kirci, H. (2003) The Effects of Various Pulping Conditions on Crystalline Structure of Cellulose in Cotton Linters. Polymer Degradation and Stability, 81, 559-564. http://dx.doi.org/10.1016/S0141-3910(03)00157-5
Akgul, M. and Tozluoglu, A. (2010) Alkaline-Ethanol Pulping of Cotton Stalks. Scientific Research and Essays, 5, 1068-1074.
Fernandez, E. and Young, R. (1996) Properties of Cellulose Pulps from Acidic and Basic Processes. Cellulose, 3, 21-44. http://dx.doi.org/10.1007/BF02228789
Robinson, J.V. (1980) Bonding of Fibers. In: Casey, P.J., Ed., Pulp and Paper Chemistry and Technology, Wiley-Interscience, New York, 915.