Modeling the Rheological Characteristics of Flexible High-Yield Pulp-Fibre-Reinforced Bio-Based Nylon 11 Bio-Composite
- 1 Centre for Biocomposites and Biomaterials Processing, Faculty of Forestry, University of Toronto, Toronto, Canada
- 2 Department of Chemical Engineering & Applied Chemistry, University of Toronto, Toronto, Canada
- 3 Powertrain Engineering Research & Development Centre, Ford Motor Company, Windsor, Canada
Abstract
The aim of this work was to develop a mathematical model to investigate the rheological characteristics of viscoelastic pulp-fibre composite materials. The rheological properties of High-Yield Pulp (HYP) reinforced bio-based Nylon 11 (Polyamide 11) (PA11) composite (HYP/PA11) were investigated using a capillary rheometer. Novel predicted multiphase rheological-model-based polymer, fibre, and interphasial phases were developed. Rheological characteristics of the compo-site components influence the development of resultant microstructures; this in turn affects mechanical characteristics of a multiphase composite. The main rheological characteristics of polymer materials are viscosity and shear rate. Experimental and theoretical test results of HYP/PA11 show a steep decrease in apparent viscosity with increasing shear rate, and this melt-flow characteristic corresponds to shear-thinning behavior in HYP/PA11. The non-linear mathematical model to predict the rheological behavior of HYP/PA11 was validated experimentally at 200°C and 5000 S <sup>-1</sup> shear rate. Finally, predicted and experimental viscosity results were compared and found to be in a strong agreement.
- Pervaiz, M. and Sain, M. (2003) Carbon Storage Potential In natural Fibre Composites. Resources, Conservation and Recycling, 39, 325-340. http://dx.doi.org/10.1016/S0921-3449(02)00173-8
- Bourmaud, A. and Baley, C. (2009) Rigidity Analysis of Polypropylene/Vegetal Fibre Composites after Recycling. Polymer Degradation and Stability, 39, 297-305. http://dx.doi.org/10.1016/j.polymdegradstab.2008.12.010
- George, J., Sreekala, M.S. and Thomas, S. (2001) A Review on Interface Modification and Characterization of Natural Fiber Reinforced Plastic Composites. Polymer Engineering Science, 41, 1471-1485. http://dx.doi.org/10.1002/pen.10846
- Gu, R. and Kokta, B. (2010) Mechanical Properties of PP Composites Reinforced with BCTMP Aspen Fiber. Journal of Thermoplastic Composite Materials, 23, 513-542. http://dx.doi.org/10.1177/0892705709355232
- Bajpai, P. (2012) Brief Description of the Pulp and Paper Making Process. Biotechnology for Pulp and Paper Processing, 7-14.
- Thomen, H. (2001) Modeling the Physical Processes in Natural Fiber Composites during Batch and Continuous Pressing. Oregon State University, Corvallis.
- Plackett, D., Torgilsson, R. and Andersen, T. (2010) Influence of Fiber Type, Fiber Mat Orientation, and Process Time on the Properties of a Wood Fiber/Polymer Composite. International Journal of Polymeric Materials, 51, 1005-1018. http://dx.doi.org/10.1080/714975684
- Uhlherr, P.H.T., Guo, J., Zhang, X.M., Zhou, J.Z.Q. and Tiu, C. (2005) The Shear-Induced Solid-Liquid Transition in Yield Stress Materials with Chemically Different Structures. Journal of Non-Newtonian Fluid Mechanics, 125, 101- 119. http://dx.doi.org/10.1016/j.jnnfm.2004.09.009
- Liu, Y.J., Xu, N. and Luo, J.F. (2000) Modeling of Interphases in Fiber-Reinforced Composites under Transverse Loading Using Boundary Element Method. Journal of Applied Mechanics, 67, 41. http://dx.doi.org/10.1115/1.321150
- Kaw, A. and Besterfield, G. (1998) Effect of Interphase on Mechanical Behavior of Composites. Journal of Engineering Mechanics, 117, 2641-2658. http://dx.doi.org/10.1061/(ASCE)0733-9399(1991)117:11(2641)
- Yeh, J.R. (1992) The Effect of Interface on the Transverse Properties of Composites. International Journal of Solids and Structures, 29, 2493-2502. http://dx.doi.org/10.1016/0020-7683(92)90005-E
- Gohil, P. and Shaikh, A. (2010) Analytical Investigation and Comparative Assessment of Interphase Influence on Elastic Behavior of Fiber Reinforced Composites. Journal of Reinforced Plastics and Composites, 29, 685-699.