Modelling and Simulation of Solidification Phenomena during Additive Manufacturing of Bulk Metallic Glass Matrix Composites (BMGMC)—A Brief Review and Introduction of Technique — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Modelling and Simulation of Solidification Phenomena during Additive Manufacturing of Bulk Metallic Glass Matrix Composites (BMGMC)—A Brief Review and Introduction of Technique
Eastern Engineering Solutions LLC, Detroit, MI, USA
1 Eastern Engineering Solutions LLC, Detroit, MI, USA
Despite a wealth of experimental studies focused on determining and improving mechanical properties and development of fundamental understanding of underlying mechanisms behind nucleation and growth of ductile phase precipitates from melt in glassy matrix, still, there is dearth of knowledge about how these ductile phases nucleate during solidification. Various efforts have been made to address this problem such as experiments in microgravity, high resolution electron microscopy and observation in synchrotron light after levitation but none have proved out to be satisfactory. In this study, an effort has been made to address this problem by modelling and simulation. Current state of the art of development, manufacturing, characterisation and modelling and simulation of bulk metallic glass matrix composites is described in detail. Evolution of microstructure in bulk metallic glass matrix composites during solidification in additive manufacturing has been presented with the aim to address fundamental problem of evolution of solidification microstructure as a result of solute partitioning, diffusion and capillary action. An overview is also presented to explain the relation of microstructure evolution to hardness and fracture toughness. This is aimed at overcoming fundamental problem of lack of ductility and toughness in this diverse class of materials. Quantitative prediction of solidification microstructure is done with the help of advanced part scale modelling and simulation techniques. It has been systematically proposed that 2-dimensional cellular automaton (CA) method combined with finite element (for thermal modelling) tools (CA-FE) programmed on FORTRAN ? and parallel simulated on ABAQUS ? would best be able to describe this complicated multiphysics phenomenon in most efficient way. Focus is laid on quantification of methodology by which modelling and simulation can be adopted and applied to describe evolution of microstructure in this important class of materials. It is found that proposed methodology is meritorious.
KeywordsSolidificationModelling and SimulationCellular Automaton
Klement, W., Willens, R.H. and Duwez, O.L. (1960) Non-Crystalline Structure in Solidified Gold-Silicon Alloys. Nature, 187, 869-870. https://doi.org/10.1038/187869b0
Chen, H.S. (1974) Thermodynamic Considerations on the Formation and Stability of Metallic Glasses. Acta Metallurgica, 22, 1505-1511. https://doi.org/10.1016/0001-6160(74)90112-6
Matthieu, M. (2016) Relaxation and Physical Aging in Network Glasses: A Review. Reports on Progress in Physics, 79, Article ID: 066504. https://doi.org/10.1088/0034-4885/79/6/066504
Hofmann, D.C. and Johnson, W.L. (2010) Improving Ductility in Nanostructured Materials and Metallic Glasses: “Three Laws”. In Materials Science Forum, Trans Tech Publications, Zurich.
Shi, Y. and Falk, M.L. (2006) Does Metallic Glass Have a Backbone? The Role of Percolating Short Range Order in Strength and Failure. Scripta Materialia, 54, 381-386. https://doi.org/10.1016/j.scriptamat.2005.09.053
Mattern, N., et al. (2009) Short-Range Order of Cu-Zr Metallic Glasses. Journal of Alloys and Compounds, 485, 163-169. https://doi.org/10.1016/j.jallcom.2009.05.111
Jiang, M.Q. and Dai, L.H. (2010) Short-Range-Order Effects on Intrinsic Plasticity of Metallic Glasses. Philosophical Magazine Letters, 90, 269-277. https://doi.org/10.1080/09500831003630781
Zhang, F., et al. (2014) Composition-Dependent Stability of the Medium-Range Order Responsible for Metallic Glass Formation. Acta Materialia, 81, 337-344. https://doi.org/10.1016/j.actamat.2014.08.041
Sheng, H.W., et al. (2006) Atomic Packing and Short-to-Medium-Range Order in Metallic Glasses. Nature, 439, 419-425. https://doi.org/10.1038/nature04421
Cheng, Y.Q., Ma, E. and Sheng, H.W. (2009) Atomic Level Structure in Multicomponent Bulk Metallic Glass. Physical Review Letters, 102, Article ID: 245501. https://doi.org/10.1103/PhysRevLett.102.245501
Inoue, A. and Takeuchi, A. (2011) Recent Development and Application Products of Bulk Glassy Alloys. Acta Materialia, 59, 2243-2267. https://doi.org/10.1016/j.actamat.2010.11.027
Wei, S., et al. (2013) Liquid-Liquid Transition in a Strong Bulk Metallic Glass-Forming Liquid. Nature Communications, 4, Article No. 2083. https://doi.org/10.1038/ncomms3083
Zu, F.-Q. (2015) Temperature-Induced Liquid-Liquid Transition in Metallic Melts: A Brief Review on the New Physical Phenomenon. Metals, 5, 395. https://doi.org/10.3390/met5010395
Lan, S., et al. (2016) Structural Crossover in a Supercooled Metallic Liquid and the Link to a Liquid-to-Liquid Phase Transition. Applied Physics Letters, 108, Article ID: 211907. https://doi.org/10.1063/1.4952724
James, P.F. (1975) Liquid-Phase Separation in Glass-Forming Systems. Journal of Materials Science, 10, 1802-1825. https://doi.org/10.1007/BF00554944
Greer, A.L. (1993) Confusion by Design. Nature, 366, 303-304. https://doi.org/10.1038/366303a0
Nelson, D.R. (1983) Order, Frustration, and Defects in Liquids and Glasses. Physical Review B, 28, 5515-5535. https://doi.org/10.1103/PhysRevB.28.5515
Ma, E. (2015) Tuning Order in Disorder. Nature Materials, 14, 547-552. https://doi.org/10.1038/nmat4300
Liu, X.J., et al. (2010) Metallic Liquids and Glasses: Atomic Order and Global Packing. Physical Review Letters, 105, Article ID: 155501. https://doi.org/10.1103/PhysRevLett.105.155501
Kumar, G., Desai, A. and Schroers, J. (2011) Bulk Metallic Glass: The Smaller the Better. Advanced Materials, 23, 461-476. https://doi.org/10.1002/adma.201002148
Drehman, A.J., Greer, A.L. and Turnbull, D. (1982) Bulk Formation of a Metallic Glass: Pd40Ni40P20. Applied Physics Letters, 41, 716-717. https://doi.org/10.1063/1.93645
Kui, H.W., Greer, A.L. and Turnbull, D. (1984) Formation of Bulk Metallic Glass by Fluxing. Applied Physics Letters, 45, 615-616. https://doi.org/10.1063/1.95330
Nishiyama, N., et al. (2012) The World’s Biggest Glassy Alloy Ever Made. Intermetallics, 30, 19-24. https://doi.org/10.1016/j.intermet.2012.03.020
Qiao, J., Jia, H. and Liaw, P.K. (2016) Metallic Glass Matrix Composites. Materials Science and Engineering: R: Reports, 100 1-69. https://doi.org/10.1016/j.mser.2015.12.001
Chen, H.S. (1980) Glassy Metals. Reports on Progress in Physics, 43, 353. https://doi.org/10.1088/0034-4885/43/4/001
Turnbull, D. (1969) Under What Conditions Can a Glass Be Formed? Contemporary Physics, 10, 473-488. https://doi.org/10.1080/00107516908204405
Akhtar, D., Cantor, B. and Cahn, R.W. (1982) Diffusion Rates of Metals in a NiZr2 Metallic Glass. Scripta Metallurgica, 16, 417-420. https://doi.org/10.1016/0036-9748(82)90164-8
Akhtar, D., Cantor, B. and Cahn, R.W. (1982) Measurements of Diffusion Rates of Au in Metal-Metal and Metal-Metalloid Glasses. Acta Metallurgica, 30, 1571-1577. https://doi.org/10.1016/0001-6160(82)90177-8
Akhtar, D. and Misra, R.D.K. (1985) Impurity Diffusion in a NiNb Metallic Glass. Scripta Metallurgica, 19, 603-607. https://doi.org/10.1016/0036-9748(85)90345-X
Inoue, A., Zhang, T. and Masumoto, T. (1993) Glass-Forming Ability of Alloys. Journal of Non-Crystalline Solids, 156, 473-480. https://doi.org/10.1016/0022-3093(93)90003-G
Lu, Z.P., Liu, Y. and Liu, C.T. (2008) Evaluation of Glass-Forming Ability. In: Miller, M. and Liaw, P., Eds., Bulk Metallic Glasses, Springer, Boston, MA, 87-115. https://doi.org/10.1007/978-0-387-48921-6_4
Yi, J., et al. (2016) Glass-Forming Ability and Crystallization Behavior of Al86Ni9La5 Metallic Glass with Si Addition. Advanced Engineering Materials, 18, 972-977.
Wang, L.-M., et al. (2012) A “Universal” Criterion for Metallic Glass Formation. Applied Physics Letters, 100, Article ID: 261913. https://doi.org/10.1063/1.4731881
Donald, I.W. and Davies, H.A. (1978) Prediction of Glass-Forming Ability for Metallic Systems. Journal of Non-Crystalline Solids, 30, 77-85. https://doi.org/10.1016/0022-3093(78)90058-3
Park, E.S. and Kim, D.H. (2005) Design of Bulk Metallic Glasses with High Glass Forming Ability and Enhancement of Plasticity in Metallic Glass Matrix Composites: A Review. Metals and Materials International, 11, 19-27. https://doi.org/10.1007/BF03027480
Chen, M. (2011) A Brief Overview of Bulk Metallic Glasses. NPG Asia Materials, 3, 82-90. https://doi.org/10.1038/asiamat.2011.30
Park, E.S., Chang, H.J. and Kim, D.H. (2008) Effect of Addition of Be on Glass-Forming Ability, Plasticity and Structural Change in Cu-Zr Bulk Metallic Glasses. Acta Materialia, 56, 3120-3131. https://doi.org/10.1016/j.actamat.2008.02.044
Guo, G.-Q., Wu, S.-Y. and Yang, L. (2016) Structural Origin of the Enhanced Glass-Forming Ability Induced by Microalloying Y in the ZrCuAl Alloy. Metals, 6, 67. https://doi.org/10.3390/met6040067
Cheng, Y.Q., Ma, E. and Sheng, H.W. (2008) Alloying Strongly Influences the Structure, Dynamics, and Glass Forming Ability of Metallic Supercooled Liquids. Applied Physics Letters, 93, Article ID: 111913. https://doi.org/10.1063/1.2987727
Jia, P., et al. (2006) A New Cu-Hf-Al Ternary Bulk Metallic Glass with High Glass Forming Ability and Ductility. Scripta Materialia, 54, 2165-2168. https://doi.org/10.1016/j.scriptamat.2006.02.042
Miracle, D.B., et al. (2010) An Assessment of Binary Metallic Glasses: Correlations between Structure, Glass Forming Ability and Stability. International Materials Reviews, 55, 218-256. https://doi.org/10.1179/095066010X12646898728200
Peker, A. and Johnson, W.L. (1993) A Highly Processable Metallic Glass: Zr41.2Ti13.8Cu12.5Ni10.0Be22.5. Applied Physics Letters, 63, 2342-2344. https://doi.org/10.1063/1.110520
Lu, Z.P. and Liu, C.T. (2002) A New Glass-Forming Ability Criterion for Bulk Metallic Glasses. Acta Materialia, 50, 3501-3512. https://doi.org/10.1016/S1359-6454(02)00166-0
Lu, Z. and Liu, C.T. (2004) A New Approach to Understanding and Measuring Glass Formation in Bulk Amorphous Materials. Intermetallics, 12, 1035-1043. https://doi.org/10.1016/j.intermet.2004.04.032
Li, Y., et al. (1997) Glass Forming Ability of Bulk Glass Forming Alloys. Scripta Materialia, 36, 783-787. https://doi.org/10.1016/S1359-6462(96)00448-4
Kim, Y.C., et al. (2003) Glass Forming Ability and Crystallization Behavior of Ti-Based Amorphous Alloys with High Specific Strength. Journal of Non-Crystalline Solids, 325, 242-250. https://doi.org/10.1016/S0022-3093(03)00327-2
Wu, J., et al. (2014) New Insight on Glass-Forming Ability and Designing Cu-Based Bulk Metallic Glasses: The Solidification Range Perspective. Materials & Design, 61, 199-202. https://doi.org/10.1016/j.matdes.2014.04.070
Shen, T.D., Sun, B.R. and Xin, S.W. (2015) Effects of Metalloids on the Thermal Stability and Glass Forming Ability of Bulk Ferromagnetic Metallic Glasses. Journal of Alloys and Compounds, 631, 60-66. https://doi.org/10.1016/j.jallcom.2015.01.070
Li, P., et al. (2014) Glass Forming Ability, Thermodynamics and Mechanical Properties of Novel Ti-Cu-Ni-Zr-Hf Bulk Metallic Glasses. Materials & Design, 53, 145-151. https://doi.org/10.1016/j.matdes.2013.06.060
Li, P., et al. (2012) Glass Forming Ability and Thermodynamics of New Ti-Cu-Ni-Zr Bulk Metallic Glasses. Journal of Non-Crystalline Solids, 358, 3200-3204. https://doi.org/10.1016/j.jnoncrysol.2012.08.005
Li, F., et al. (2011) Structural Origin Underlying Poor Glass Forming Ability of Al Metallic Glass. Journal of Applied Physics, 110, Article ID: 013519. https://doi.org/10.1063/1.3605510
Fan, C., et al. (2001) Effects of Nb Addition on Icosahedral Quasicrystalline Phase Formation and Glass-Forming Ability of Zr-Ni-Cu-Al Metallic Glasses. Applied Physics Letters, 79, 1024-1026. https://doi.org/10.1063/1.1391396
Yang, H., Lim, K.Y. and Li, Y. (2010) Multiple Maxima in Glass-Forming Ability in Al-Zr-Ni System. Journal of Alloys and Compounds, 489, 183-187. https://doi.org/10.1016/j.jallcom.2009.09.049
Xu, D., Duan, G. and Johnson, W.L. (2004) Unusual Glass-Forming Ability of Bulk Amorphous Alloys Based on Ordinary Metal Copper. Physical Review Letters, 92, Article ID: 245504. https://doi.org/10.1103/PhysRevLett.92.245504
Zhang, K., et al. (2013) Computational Studies of the Glass-Forming Ability of Model Bulk Metallic Glasses. The Journal of Chemical Physics, 139, Article ID: 124503. https://doi.org/10.1063/1.4821637
Amokrane, S., Ayadim, A. and Levrel, L. (2015) Structure of the Glass-Forming Metallic Liquids by Ab-Initio and Classical Molecular Dynamics, a Case Study: Quenching the Cu60Ti20Zr20 Alloy. Journal of Applied Physics, 118, Article ID: 194903. https://doi.org/10.1063/1.4935876
Hays, C.C., Kim, C.P. and Johnson, W.L. (2000) Microstructure Controlled Shear Band Pattern Formation and Enhanced Plasticity of Bulk Metallic Glasses Containing in Situ Formed Ductile Phase Dendrite Dispersions. Physical Review Letters, 84, 2901-2904. https://doi.org/10.1103/PhysRevLett.84.2901
Hofmann, D.C., et al. (2008) Designing Metallic Glass Matrix Composites with High Toughness and Tensile Ductility. Nature, 451, 1085-1089. https://doi.org/10.1038/nature06598
Wu, Y., et al. (2014) Designing Bulk Metallic Glass Composites with Enhanced Formability and Plasticity. Journal of Materials Science & Technology, 30, 566-575. https://doi.org/10.1016/j.jmst.2014.03.028
Guo, H., et al. (2007) Tensile Ductility and Necking of Metallic Glass. Nature Materials, 6, 735-739. https://doi.org/10.1038/nmat1984
Jang, D. and Greer, J.R. (2010) Transition from a Strong-Yet-Brittle to a Stronger-and-Ductile State by Size Reduction of Metallic Glasses. Nature Materials, 9, 215-219. https://doi.org/10.1038/nmat2622
Choi-Yim, H. (1998) Synthesis and Characterization of Bulk Metallic Glass Matrix Composites. California Institute of Technology, Pasadena.
Choi-Yim, H., et al. (2002) Processing, Microstructure and Properties of Ductile Metal Particulate Reinforced Zr57Nb5Al10Cu15.4Ni12.6 Bulk Metallic Glass Composites. Acta Materialia, 50, 2737-2745. https://doi.org/10.1016/S1359-6454(02)00113-1
Lee, M.L., Li, Y. and Schuh, C.A. (2004) Effect of a Controlled Volume Fraction of Dendritic Phases on Tensile and Compressive Ductility in La-Based Metallic Glass Matrix Composites. Acta Materialia, 52, 4121-4131. https://doi.org/10.1016/j.actamat.2004.05.025
Trexler, M.M. and Thadhani, N.N. (2010) Mechanical Properties of Bulk Metallic Glasses. Progress in Materials Science, 55, 759-839. https://doi.org/10.1016/j.pmatsci.2010.04.002
Pauly, S., et al. (2010) Transformation-Mediated Ductility in CuZr-Based Bulk Metallic Glasses. Nature Materials, 9, 473-477. https://doi.org/10.1038/nmat2767
Wu, Y., et al. (2010) Bulk Metallic Glass Composites with Transformation-Mediated Work-Hardening and Ductility. Advanced Materials, 22, 2770-2773. https://doi.org/10.1002/adma.201000482
Song, K.K., et al. (2012) Triple Yielding and Deformation Mechanisms in Metastable Cu47.5Zr47.5Al5 Composites. Acta Materialia, 60, 6000-6012. https://doi.org/10.1016/j.actamat.2012.07.015
Wu, D.Y., et al. (2016) Glass-Forming Ability, Thermal Stability of B2 CuZr Phase, and Crystallization Kinetics for Rapidly Solidified Cu-Zr-Zn Alloys. Journal of Alloys and Compounds, 664, 99-108. https://doi.org/10.1016/j.jallcom.2015.12.187
Kim, C., et al. (2011) Realization of High Tensile Ductility in a Bulk Metallic Glass Composite by the Utilization of Deformation-Induced Martensitic Transformation. Scripta Materialia, 65, 304-307. https://doi.org/10.1016/j.scriptamat.2011.04.037
Gao, W.-H., et al. (2015) Effects of Co and Al Addition on Martensitic Transformation and Microstructure in ZrCu-Based Shape Memory Alloys. Transactions of Nonferrous Metals Society of China, 25, 850-855. https://doi.org/10.1016/S1003-6326(15)63673-1
Zhai, H., Wang, H. and Liu, F. (2016) A Strategy for Designing Bulk Metallic Glass Composites with Excellent Work-Hardening and Large Tensile Ductility. Journal of Alloys and Compounds, 685, 322-330. https://doi.org/10.1016/j.jallcom.2016.05.290
Tian, F., Li, Z. and Song, J. (2016) Solidification of Laser Deposition Shaping for TC4 Alloy Based on Cellular Automation. Journal of Alloys and Compounds, 676, 542-550. https://doi.org/10.1016/j.jallcom.2016.03.204
Ogata, S., et al. (2006) Atomistic Simulation of Shear Localization in Cu-Zr Bulk Metallic Glass. Intermetallics, 14, 1033-1037. https://doi.org/10.1016/j.intermet.2006.01.022
Packard, C.E. and Schuh, C.A. (2007) Initiation of Shear Bands near a Stress Concentration in Metallic Glass. Acta Materialia, 55, 5348-5358. https://doi.org/10.1016/j.actamat.2007.05.054
Pampillo, C.A. (1972) Localized Shear Deformation in a Glassy Metal. Scripta Metallurgica, 6, 915-917. https://doi.org/10.1016/0036-9748(72)90144-5
Zhou, M., Rosakis, A.J. and Ravichandran, G. (1998) On the Growth of Shear Bands and Failure-Mode Transition in Prenotched Plates: A Comparison of Singly and Doubly Notched Specimens. International Journal of Plasticity, 14, 435-451. https://doi.org/10.1016/S0749-6419(98)00003-5
Pan, D., et al. (2008) Experimental Characterization of Shear Transformation Zones for Plastic Flow of Bulk Metallic Glasses. Proceedings of the National Academy of Sciences, 105, 14769-14772. https://doi.org/10.1073/pnas.0806051105
Taub, A.I. and Spaepen, F. (1980) The Kinetics of Structural Relaxation of a Metallic Glass. Acta Metallurgica, 28, 1781-1788. https://doi.org/10.1016/0001-6160(80)90031-0
Tsao, S.S. and Spaepen, F. (1985) Structural Relaxation of a Metallic Glass near Equilibrium. Acta Metallurgica, 33, 881-889. https://doi.org/10.1016/0001-6160(85)90112-9
Schroers, J. and Johnson, W.L. (2004) Ductile Bulk Metallic Glass. Physical Review Letters, 93, Article ID: 255506. https://doi.org/10.1103/PhysRevLett.93.255506
Jiang, W.H., et al. (2006) Ductility of a Zr-Based Bulk-Metallic Glass with Different Specimen’s Geometries. Materials Letters, 60, 3537-3540. https://doi.org/10.1016/j.matlet.2006.03.047
Das, J., et al. (2007) Plasticity in Bulk Metallic Glasses Investigated via the Strain Distribution. Physical Review B, 76, Article ID: 092203. https://doi.org/10.1103/PhysRevB.76.092203
Chen, L.Y., et al. (2008) New Class of Plastic Bulk Metallic Glass. Physical Review Letters, 100, Article ID: 075501. https://doi.org/10.1103/PhysRevLett.100.075501
Abdeljawad, F., Fontus, M. and Haataja, M. (2011) Ductility of Bulk Metallic Glass Composites: Microstructural Effects. Applied Physics Letters, 98, Article ID: 031909. https://doi.org/10.1063/1.3531660
Magagnosc, D.J., et al. (2013) Tunable Tensile Ductility in Metallic Glasses. Scientific Reports, 3, 1096. https://doi.org/10.1038/srep01096
Lu, X.L., et al. (2013) Gradient Confinement Induced Uniform Tensile Ductility in Metallic Glass. Scientific Reports, 3, 3319. https://doi.org/10.1038/srep03319
Pekarskaya, E., Kim, C.P. and Johnson, W.L. (2001) In Situ Transmission Electron Microscopy Studies of Shear Bands in a Bulk Metallic Glass Based Composite. Journal of Materials Research, 16, 2513-2518. https://doi.org/10.1557/JMR.2001.0344
Zhang, Q., Zhang, H.F., Zhu, Z.W. and Hu, Z.Q. (2005) Formation of High Strength In-Situ Bulk Metallic Glass Composite with Enhanced Plasticity in Cu50Zr47.5Ti2.5 Alloy. Materials Transactions, 46, 730-733. https://doi.org/10.2320/matertrans.46.730
Zhu, Z., et al. (2010) Ta-Particulate Reinforced Zr-Based Bulk Metallic Glass Matrix Composite with Tensile Plasticity. Scripta Materialia, 62, 278-281. https://doi.org/10.1016/j.scriptamat.2009.11.018
Fan, C., Ott, R.T. and Hufnagel, T.C. (2002) Metallic Glass Matrix Composite with Precipitated Ductile Reinforcement. Applied Physics Letters, 81, 1020-1022. https://doi.org/10.1063/1.1498864
Hu, X., et al. (2003) Glass Forming Ability and In-Situ Composite Formation in Pd-Based Bulk Metallic Glasses. Acta Materialia, 51, 561-572. https://doi.org/10.1016/S1359-6454(02)00438-X
Cheng, J.-L., et al. (2013) Innovative Approach to the Design of Low-Cost Zr-Based BMG Composites with Good Glass Formation. Scientific Reports, 3, 2097. https://doi.org/10.1038/srep02097
Wu, F.F., et al. (2007) Effect of Annealing on the Mechanical Properties and Fracture Mechanisms of a Zr56.2Ti13.8Nb5.0Cu6.9Ni5.6Be12.5 Bulk-Metallic-Glass Composite. Physical Review B, 75, Article ID: 134201. https://doi.org/10.1103/PhysRevB.75.134201
Chen, H.S. (1976) Ductile-Brittle Transition in Metallic Glasses. Materials Science and Engineering, 26, 79-82. https://doi.org/10.1016/0025-5416(76)90228-7
Antonione, C., et al. (1998) Phase Separation in Multicomponent Amorphous Alloys. Journal of Non-Crystalline Solids, 232-234, 127-132. https://doi.org/10.1016/S0022-3093(98)00486-4
Fan, C., Li, C. and Inoue, A. (2000) Nanocrystal Composites in Zr-Nb-Cu-Al Metallic Glasses. Journal of Non-Crystalline Solids, 270, 28-33. https://doi.org/10.1016/S0022-3093(00)00078-8
Fan, C. and Inoue, A. (2000) Ductility of Bulk Nanocrystalline Composites and Metallic Glasses at Room Temperature. Applied Physics Letters, 77, 46-48. https://doi.org/10.1063/1.126872
Basu, J., et al. (2003) Microstructure and Mechanical Properties of a Partially Crystallized La-Based Bulk Metallic Glass. Philosophical Magazine, 83, 1747-1760. https://doi.org/10.1080/0141861861031000104163
Fan, C., et al. (2006) Properties of As-Cast and Structurally Relaxed Zr-Based Bulk Metallic Glasses. Journal of Non-Crystalline Solids, 352, 174-179. https://doi.org/10.1016/j.jnoncrysol.2005.11.016
Gu, J., et al. (2013) Effects of Annealing on the Hardness and Elastic Modulus of a Cu36Zr48Al8Ag8 Bulk Metallic Glass. Materials & Design, 47, 706-710. https://doi.org/10.1016/j.matdes.2012.12.071
Tan, J., et al. (2013) Correlation between Internal States and Strength in Bulk Metallic Glass, in PRICM. John Wiley & Sons, Inc., New York, 3199-3206. https://doi.org/10.1002/9781118792148.ch394
Krämer, L., et al. (2015) Production of Bulk Metallic Glasses by Severe Plastic Deformation. Metals, 5, 720. https://doi.org/10.3390/met5020720
Song, K.K., et al. (2011) Strategy for Pinpointing the Formation of B2 CuZr in Metastable CuZr-Based Shape Memory Alloys. Acta Materialia, 59, 6620-6630. https://doi.org/10.1016/j.actamat.2011.07.017
Ding, J., et al. (2014) Large-Sized CuZr-Based Bulk Metallic Glass Composite with Enhanced Mechanical Properties. Journal of Materials Science & Technology, 30, 590-594. https://doi.org/10.1016/j.jmst.2014.01.014
Jiang, F., et al. (2007) Microstructure Evolution and Mechanical Properties of Cu46Zr47Al7 Bulk Metallic Glass Composite Containing CuZr Crystallizing Phases. Materials Science and Engineering: A, 467, 139-145. https://doi.org/10.1016/j.msea.2007.02.093
Liu, J., et al. (2010) Microstructure and Compressive Properties of In-Situ Martensite CuZr Phase Reinforced ZrCuNiAl Metallic Glass Matrix Composite. Materials Transactions, 51, 1033-1037. https://doi.org/10.2320/matertrans.M2010031
Liu, Z., et al. (2012) Microstructural Tailoring and Improvement of Mechanical Properties in CuZr-Based Bulk Metallic Glass Composites. Acta Materialia, 60, 3128-3139. https://doi.org/10.1016/j.actamat.2012.02.017
Liu, Z.Q., et al. (2014) Microstructural Percolation Assisted Breakthrough of Trade-Off between Strength and Ductility in CuZr-Based Metallic Glass Composites. Scientific Reports, 4, 4167. https://doi.org/10.1038/srep04167
Schryvers, D., et al. (1997) Unit Cell Determination in CuZr Martensite by Electron Microscopy and X-Ray Diffraction. Scripta Materialia, 36, 1119-1125. https://doi.org/10.1016/S1359-6462(97)00003-1
Seo, J.W. and Schryvers, D. (1998) TEM Investigation of the Microstructure and Defects of CuZr Martensite. Part I: Morphology and Twin Systems. Acta Materialia, 46, 1165-1175. https://doi.org/10.1016/S1359-6454(97)00333-9
Seo, J.W. and Schryvers, D. (1998) TEM Investigation of the Microstructure and Defects of CuZr Martensite. Part II: Planar Defects. Acta Materialia, 46, 1177-1183. https://doi.org/10.1016/S1359-6454(97)00334-0
Song, K. (2013) Synthesis, Microstructure, and Deformation Mechanisms of CuZr-Based Bulk Metallic Glass Composites. 1-191.
Song, K.K., et al. (2013) Correlation between the Microstructures and the Deformation Mechanisms of CuZr-Based Bulk Metallic Glass Composites. AIP Advances, 3, Article ID: 012116. https://doi.org/10.1063/1.4789516
Chang, H.J., et al. (2010) Synthesis of Metallic Glass Composites Using Phase Separation Phenomena. Acta Materialia, 58, 2483-2491. https://doi.org/10.1016/j.actamat.2009.12.034
Kündig, A.A., et al. (2004) In Situ Formed Two-Phase Metallic Glass with Surface Fractal Microstructure. Acta Materialia, 52, 2441-2448. https://doi.org/10.1016/j.actamat.2004.01.036
Oh, J.C., et al. (2005) Phase Separation in Cu43Zr43Al7Ag7 Bulk Metallic Glass. Scripta Materialia, 53, 165-169. https://doi.org/10.1016/j.scriptamat.2005.03.046
Park, E.S. and Kim, D.H. (2006) Phase Separation and Enhancement of Plasticity in Cu-Zr-Al-Y Bulk Metallic Glasses. Acta Materialia, 54, 2597-2604. https://doi.org/10.1016/j.actamat.2005.12.020
Kim, D.H., et al. (2013) Phase Separation in Metallic Glasses. Progress in Materials Science, 58, 1103-1172. https://doi.org/10.1016/j.pmatsci.2013.04.002
Sun, L., et al. (2016) Phase Separation and Microstructure Evolution of Zr48Cu36Ag8Al8 Bulk Metallic Glass in the Supercooled Liquid Region. Rare Metal Materials and Engineering, 45, 567-570. https://doi.org/10.1016/S1875-5372(16)30073-X
Antonowicz, J., et al. (2008) Early Stages of Phase Separation and Nanocrystallization in Al-Rare Earth Metallic Glasses Studied Using SAXS/WAXS and HRTEM Methods. Reviews on Advanced Materials Science, 18, 454-458.
Park, B.J., et al. (2006) Phase Separating Bulk Metallic Glass: A Hierarchical Composite. Physical Review Letters, 96, Article ID: 245503. https://doi.org/10.1103/PhysRevLett.96.245503
Guo, G.-Q., et al. (2015) How Can Synchrotron Radiation Techniques Be Applied for Detecting Microstructures in Amorphous Alloys? Metals, 5, 2048. https://doi.org/10.3390/met5042048
Guo, G.-Q., et al. (2015) Detecting Structural Features in Metallic Glass via Synchrotron Radiation Experiments Combined with Simulations. Metals, 5, 2093. https://doi.org/10.3390/met5042093
Michalik, S., et al. (2014) Structural Modifications of Swift-Ion-Bombarded Metallic Glasses Studied by High-Energy X-Ray Synchrotron Radiation. Acta Materialia, 80, 309-316. https://doi.org/10.1016/j.actamat.2014.07.072
Mu, J., et al. (2013) In Situ High-Energy X-Ray Diffraction Studies of Deformation-Induced Phase Transformation in Ti-Based Amorphous Alloy Composites Containing Ductile Dendrites. Acta Materialia, 61, 5008-5017. https://doi.org/10.1016/j.actamat.2013.04.045
Paradis, P.-F., et al. (2014) Materials Properties Measurements and Particle Beam Interactions Studies Using Electrostatic Levitation. Materials Science and Engineering: R: Reports, 76, 1-53.
Huang, Y.J., Shen, J. and Sun, J.F. (2007) Bulk Metallic Glasses: Smaller Is Softer. Applied Physics Letters, 90, Article ID: 081919. https://doi.org/10.1063/1.2696502
Oh, Y.S., et al. (2011) Microstructure and Tensile Properties of High-Strength High-Ductility Ti-Based Amorphous Matrix Composites Containing Ductile Dendrites. Acta Materialia, 59, 7277-7286. https://doi.org/10.1016/j.actamat.2011.08.006
Kim, K.B., et al. (2005) Heterogeneous Distribution of Shear Strains in Deformed Ti66.1Cu8Ni4.8Sn7.2Nb13.9 Nanostructure-Dendrite Composite. Physica Status Solidi (A), 202, 2405-2412.
He, G., et al. (2003) Novel Ti-Base Nanostructure-Dendrite Composite with Enhanced Plasticity. Nature Materials, 2, 33-37. https://doi.org/10.1038/nmat792
Wang, Y., et al. (2014) Investigation of the Microcrack Evolution in a Ti-Based Bulk Metallic Glass Matrix Composite. Progress in Natural Science: Materials International, 24, 121-127. https://doi.org/10.1016/j.pnsc.2014.03.010
Wang, Y.S., et al. (2014) The Role of the Interface in a Ti-Based Metallic Glass Matrix Composite with in Situ Dendrite Reinforcement. Surface and Interface Analysis, 46, 293-296. https://doi.org/10.1002/sia.5413
Zhang, T., et al. (2014) Dendrite Size Dependence of Tensile Plasticity of in Situ Ti-Based Metallic Glass Matrix Composites. Journal of Alloys and Compounds, 583, 593-597. https://doi.org/10.1016/j.jallcom.2013.08.201
Chu, M.Y., et al. (2015) Quasi-Static and Dynamic Deformation Behaviors of an in-Situ Ti-Based Metallic Glass Matrix Composite. Journal of Alloys and Compounds, 640, 305-310. https://doi.org/10.1016/j.jallcom.2015.03.253
Hofmann, D.C., et al. (2008) New Processing Possibilities for Highly Toughened Metallic Glass Matrix Composites with Tensile Ductility. Scripta Materialia, 59, 684-687. https://doi.org/10.1016/j.scriptamat.2008.05.046
Chu, J.P. (2009) Annealing-Induced Amorphization in a Glass-Forming Thin Film. JOM, 61, 72-75. https://doi.org/10.1007/s11837-009-0014-x
Cheng, J.L. and Chen, G. (2013) Glass Formation of Zr-Cu-Ni-Al Bulk Metallic Glasses Correlated with L → Zr2Cu + ZrCu Pseudo Binary Eutectic Reaction. Journal of Alloys and Compounds, 577, 451-455. https://doi.org/10.1016/j.jallcom.2013.06.126
Biffi, C.A., Figini Albisetti, A. and Tuissi, A. (2013) CuZr Based Shape Memory Alloys: Effect of Cr and Co on the Martensitic Transformation. Materials Science Forum, Trans Tech Publications, Zurich.
Inoue, A., Nishiyama, N. and Matsuda, T. (1996) Preparation of Bulk Glassy Pd40Ni10Cu30P20 Alloy of 40 mm in Diameter by Water Quenching. Materials Transactions, JIM, 37, 181-184.
He, Y., Schwarz, R.B. and Archuleta, J.I. (1996) Bulk Glass Formation in the Pd-Ni-P System. Applied Physics Letters, 69, 1861-1863. https://doi.org/10.1063/1.117458
Inoue, A., Zhang, T. and Masumoto, T. (1990) Zr-Al-Ni Amorphous Alloys with High Glass Transition Temperature and Significant Supercooled Liquid Region. Materials Transactions, JIM, 31, 177-183.
Tan, J., et al. (2011) Study of Mechanical Property and Crystallization of a ZrCoAl Bulk Metallic Glass. Intermetallics, 19, 567-571. https://doi.org/10.1016/j.intermet.2010.12.006
Chen, G., et al. (2009) Enhanced Plasticity in a Zr-Based Bulk Metallic Glass Composite with in Situ Formed Intermetallic Phases. Applied Physics Letters, 95, Article ID: 081908. https://doi.org/10.1063/1.3211912
Jeon, C., et al. (2015) Effects of Effective Dendrite Size on Tensile Deformation Behavior in Ti-Based Dendrite-Containing Amorphous Matrix Composites Modified from Ti-6Al-4V Alloy. Metallurgical and Materials Transactions A, 46, 235-250. https://doi.org/10.1007/s11661-014-2531-7
Gibson, I., Rosen, W.D. and Stucker, B. (2010) Development of Additive Manufacturing Technology, in Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. Springer, Boston, MA, 36-58. https://doi.org/10.1007/978-1-4419-1120-9_2
Spears, T.G. and Gold, S.A. (2016) In-Process Sensing in Selective Laser Melting (SLM) Additive Manufacturing. Integrating Materials and Manufacturing Innovation, 5, 1-25. https://doi.org/10.1186/s40192-016-0045-4
Pauly, S., et al. (2013) Processing Metallic Glasses by Selective Laser Melting. Materials Today, 16, 37-41. https://doi.org/10.1016/j.mattod.2013.01.018
Schroers, J. (2010) Processing of Bulk Metallic Glass. Advanced Materials, 22, 1566-1597. https://doi.org/10.1002/adma.200902776
Li, X.P., et al. (2016) Selective Laser Melting of Zr-Based Bulk Metallic Glasses: Processing, Microstructure and Mechanical Properties. Materials & Design, 112, 217-226. https://doi.org/10.1016/j.matdes.2016.09.071
Zheng, B., et al. (2009) Processing and Behavior of Fe-Based Metallic Glass Components via Laser-Engineered Net Shaping. Metallurgical and Materials Transactions A, 40, 1235-1245. https://doi.org/10.1007/s11661-009-9828-y
Olakanmi, E.O., Cochrane, R.F. and Dalgarno, K.W. (2015) A Review on Selective Laser Sintering/Melting (SLS/SLM) of Aluminium Alloy Powders: Processing, Microstructure, and Properties. Progress in Materials Science, 74, 401-477. https://doi.org/10.1016/j.pmatsci.2015.03.002
Buchbinder, D., et al. (2011) High Power Selective Laser Melting (HP SLM) of Aluminum Parts. Physics Procedia, 12, 271-278. https://doi.org/10.1016/j.phpro.2011.03.035
Li, Y. and Gu, D. (2014) Thermal Behavior during Selective Laser Melting of Commercially Pure Titanium Powder: Numerical Simulation and Experimental Study. Additive Manufacturing, 1-4, 99-109. https://doi.org/10.1016/j.addma.2014.09.001
Yap, C.Y., et al. (2015) Review of Selective Laser Melting: Materials and Applications. Applied Physics Reviews, 2, Article ID: 041101.
Romano, J., et al. (2015) Temperature Distribution and Melt Geometry in Laser and Electron-Beam Melting Processes—A Comparison among Common Materials. Additive Manufacturing, 8, 1-11. https://doi.org/10.1016/j.addma.2015.07.003
Sun, H. and Flores, K.M. (2010) Microstructural Analysis of a Laser-Processed Zr-Based Bulk Metallic Glass. Metallurgical and Materials Transactions A, 41, 1752-1757. https://doi.org/10.1007/s11661-009-0151-4
Zhang, Y., et al. (2015) Microstructural Analysis of Zr55Cu30Al10Ni5 Bulk Metallic Glasses by Laser Surface Remelting and Laser Solid Forming. Intermetallics, 66, 22-30. https://doi.org/10.1016/j.intermet.2015.06.007
Frazier, W.E. (2014) Metal Additive Manufacturing: A Review. Journal of Materials Engineering and Performance, 23, 1917-1928. https://doi.org/10.1007/s11665-014-0958-z
Wong, K.V. and Hernandez, A. (2012) A Review of Additive Manufacturing. ISRN Mechanical Engineering, 2012, 10.
Travitzky, N., et al. (2014) Additive Manufacturing of Ceramic-Based Materials. Advanced Engineering Materials, 16, 729-754. https://doi.org/10.1002/adem.201400097
Baufeld, B., Brandl, E. and van der Biest, O. (2011) Wire Based Additive Layer Manufacturing: Comparison of Microstructure and Mechanical Properties of Ti-6Al-4V Components Fabricated by Laser-Beam Deposition and Shaped Metal Deposition. Journal of Materials Processing Technology, 211, 1146-1158. https://doi.org/10.1016/j.jmatprotec.2011.01.018
Chen, Y., Zhou, C. and Lao, J. 2011 () A Layerless Additive Manufacturing Process Based on CNC Accumulation. Rapid Prototyping Journal, 17, 218-227. https://doi.org/10.1108/13552541111124806
Kawahito, Y., et al. (2008) High-Power Fiber Laser Welding and Its Application to Metallic Glass Zr55Al10Ni5Cu30. Materials Science and Engineering: B, 148, 105-109. https://doi.org/10.1016/j.mseb.2007.09.062
Kim, J.H., et al. (2007) Pulsed Nd:YAG Laser Welding of Cu54Ni6Zr22Ti18 Bulk Metallic Glass. Materials Science and Engineering: A, 449-451, 872-875. https://doi.org/10.1016/j.msea.2006.02.323
Li, B., et al. (2006) Laser Welding of Zr45Cu48Al7 Bulk Glassy Alloy. Journal of Alloys and Compounds, 413, 118-121. https://doi.org/10.1016/j.jallcom.2005.07.005
Wang, G., et al. (2012) Laser Welding of Ti40Zr25Ni3Cu12Be20 Bulk Metallic Glass. Materials Science and Engineering: A, 541, 33-37. https://doi.org/10.1016/j.msea.2012.01.114
Wang, H.S., et al. (2010) Combination of a Nd:YAG Laser and a Liquid Cooling Device to (Zr53Cu30Ni9Al8)Si0.5 Bulk Metallic Glass Welding. Materials Science and Engineering: A, 528, 338-341. https://doi.org/10.1016/j.msea.2010.09.014
Wang, H.-S., et al. (2011) The Effects of Initial Welding Temperature and Welding Parameters on the Crystallization Behaviors of Laser Spot Welded Zr-Based Bulk Metallic Glass. Materials Chemistry and Physics, 129, 547-552. https://doi.org/10.1016/j.matchemphys.2011.04.067
Acharya, R. and Das, S. (2015) Additive Manufacturing of IN100 Superalloy Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair: Process Development, Modeling, Microstructural Characterization, and Process Control. Metallurgical and Materials Transactions A, 46, 3864-3875. https://doi.org/10.1007/s11661-015-2912-6
Sames, W.J., et al. (2016) The Metallurgy and Processing Science of Metal Additive Manufacturing. International Materials Reviews, 61, 315-360. https://doi.org/10.1080/09506608.2015.1116649
Harooni, A., et al. (2016) Processing Window Development for Laser Cladding of Zirconium on Zirconium Alloy. Journal of Materials Processing Technology, 230, 263-271. https://doi.org/10.1016/j.jmatprotec.2015.11.028
Wu, X. and Hong, Y. (2001) Fe-Based Thick Amorphous-Alloy Coating by Laser Cladding. Surface and Coatings Technology, 141, 141-144. https://doi.org/10.1016/S0257-8972(01)01263-4
Wu, X., Xu, B. and Hong, Y. (2002) Synthesis of Thick Ni66Cr5Mo4Zr6P15B4 Amorphous Alloy Coating and Large Glass-Forming Ability by Laser Cladding. Materials Letters, 56, 838-841. https://doi.org/10.1016/S0167-577X(02)00624-9
Yue, T.M. and Su, Y.P. (2008) Laser Cladding of SiC Reinforced Zr65Al7.5Ni10Cu17.5 Amorphous Coating on Magnesium Substrate. Applied Surface Science, 255, 1692-1698. https://doi.org/10.1016/j.apsusc.2008.06.036
Yue, T.M., Su, Y.P. and Yang, H.O. (2007) Laser Cladding of Zr65Al7.5Ni10Cu17.5 Amorphous Alloy on Magnesium. Materials Letters, 61, 209-212. https://doi.org/10.1016/j.matlet.2006.04.033
Zhang, P., et al. (2011) Synthesis of Fe-Ni-B-Si-Nb Amorphous and Crystalline Composite Coatings by Laser Cladding and Remelting. Surface and Coatings Technology, 206, 1229-1236. https://doi.org/10.1016/j.surfcoat.2011.08.039
Zhu, Q., et al. (2007) Synthesis of Fe-Based Amorphous Composite Coatings with Low Purity Materials by Laser Cladding. Applied Surface Science, 253, 7060-7064. https://doi.org/10.1016/j.apsusc.2007.02.055
Boettinger, W.J., et al. (2002) Phase-Field Simulation of Solidification. Annual Review of Materials Research, 32, 163-194. https://doi.org/10.1146/annurev.matsci.32.101901.155803
Emmerich, H. (2009) Phase-Field Modelling for Metals and Colloids and Nucleation Therein—An Overview. Journal of Physics: Condensed Matter, 21, Article ID: 464103. https://doi.org/10.1088/0953-8984/21/46/464103
Emmerich, H., et al. (2012) Phase-Field-Crystal Models for Condensed Matter Dynamics on Atomic Length and Diffusive Time Scales: An Overview. Advances in Physics, 61, 665-743. https://doi.org/10.1080/00018732.2012.737555
Gong, X. and Chou, K. (2015) Phase-Field Modeling of Microstructure Evolution in Electron Beam Additive Manufacturing. JOM, 67, 1176-1182. https://doi.org/10.1007/s11837-015-1352-5
Gránásy, L., et al. (2014) Phase-Field Modeling of Polycrystalline Solidification: From Needle Crystals to Spherulites—A Review. Metallurgical and Materials Transactions A, 45, 1694-1719. https://doi.org/10.1007/s11661-013-1988-0
Wang, T. and Napolitano, R.E. (2012) A Phase-Field Model for Phase Transformations in Glass-Forming Alloys. Metallurgical and Materials Transactions A, 43, 2662-2668. https://doi.org/10.1007/s11661-012-1136-2
Rappaz, M. and Gandin, C.A. (1993) Probabilistic Modelling of Microstructure Formation in Solidification Processes. Acta Metallurgica et Materialia, 41, 345-360. https://doi.org/10.1016/0956-7151(93)90065-Z
Charbon, C. and Rappaz, M. (1993) 3D Probabilistic Modelling of Equiaxed Eutectic Solidification. Modelling and Simulation in Materials Science and Engineering, 1, 455. https://doi.org/10.1088/0965-0393/1/4/009
Gandin, C.A., Schaefer, R.J. and Rappax, M. (1996) Analytical and Numerical Predictions of Dendritic Grain Envelopes. Acta Materialia, 44, 3339-3347. https://doi.org/10.1016/1359-6454(95)00433-5
Gandin, C.A. and Rappaz, M. (1997) A 3D Cellular Automaton Algorithm for the Prediction of Dendritic Grain Growth. Acta Materialia, 45, 2187-2195. https://doi.org/10.1016/S1359-6454(96)00303-5
Gandin, C.A. and Rappaz, M. (1994) A Coupled Finite Element-Cellular Automaton Model for the Prediction of Dendritic Grain Structures in Solidification Processes. Acta Metallurgica et Materialia, 42, 2233-2246. https://doi.org/10.1016/0956-7151(94)90302-6
Chen, S., Guillemot, G. and Gandin, C.-A. (2014) 3D Coupled Cellular Automaton (CA)-Finite Element (FE) Modeling for Solidification Grain Structures in Gas Tungsten Arc Welding (GTAW). ISIJ International, 54, 401-407. https://doi.org/10.2355/isijinternational.54.401
Chen, S. (2014) Three Dimensional Cellular Automaton-Finite Element (CAFE) Modeling for the Grain Structures Development in Gas Tungsten/Metal Arc Welding Processes. Ecole Nationale Supérieure des Mines de Paris.
Tsai, D.-C. and Hwang, W.-S. (2011) A Three Dimensional Cellular Automaton Model for the Prediction of Solidification Morphologies of Brass Alloy by Horizontal Continuous Casting and Its Experimental Verification. Materials Transactions, 52, 787-794. https://doi.org/10.2320/matertrans.M2010402
Wei, L., et al. (2014) Low Artificial Anisotropy Cellular Automaton Model and Its Applications to the Cell-to-Dendrite Transition in Directional Solidification. Materials Discovery, 1-21.
Zinoviev, A., et al. (2016) Evolution of Grain Structure during Laser Additive Manufacturing. Simulation by a Cellular Automata Method. Materials & Design, 106, 321-329. https://doi.org/10.1016/j.matdes.2016.05.125
Wang, Z.-J., et al. (2014) Simulation of Microstructure during Laser Rapid Forming Solidification Based on Cellular Automaton. Mathematical Problems in Engineering, 2014, 9.
Zhou, X., et al. (2016) Simulation of Microstructure Evolution during Hybrid Deposition and Micro-Rolling Process. Journal of Materials Science, 51, 6735-6749. https://doi.org/10.1007/s10853-016-9961-0
Zhang, J., et al. (2013) Probabilistic Simulation of Solidification Microstructure Evolution during Laser-Based Metal Deposition. Proceedings of 2013 Annual International Solid Freeform Fabrication Symposium: An Additive Manufacturing Conference, 739-748.
Rafique, M.M.A. (2015) Modeling and Simulation of Heat Transfer Phenomena.
Christian, J.W. (2002) Chapter 10—The Classical Theory of Nucleation. In: The Theory of Transformations in Metals and Alloys, Pergamon, Oxford, 422-479. https://doi.org/10.1016/B978-008044019-4/50014-3
Inoue, A., Zhang, T. and Makabe, E. (1998) Production Methods of Metallic Glasses by a Suction Casting Method. Google Patents.
Inoue, A. and Zhang, T. (1995) Fabrication of Bulky Zr-Based Glassy Alloys by Suction Casting into Copper Mold. Materials Transactions, JIM, 36, 1184-1187. https://doi.org/10.2320/matertrans1989.36.1184
Lou, H.B., et al. (2011) 73 mm-Diameter Bulk Metallic Glass Rod by Copper Mould Casting. Applied Physics Letters, 99, Article ID: 051910. https://doi.org/10.1063/1.3621862
Inoue, A., et al. (2015) Production Methods and Properties of Engineering Glassy Alloys and Composites. Intermetallics, 58, 20-30. https://doi.org/10.1016/j.intermet.2014.11.001
Browne, D.J., Kovacs, Z. and Mirihanage, W.U. (2009) Comparison of Nucleation and Growth Mechanisms in Alloy Solidification to Those in Metallic Glass Crystallisation—Relevance to Modeling. Transactions of the Indian Institute of Metals, 62, 409-412. https://doi.org/10.1007/s12666-009-0055-4
Wang, C.Y. and Beckermann, C. (1993) A Multiphase Solute Diffusion Model for Dendritic Alloy Solidification. Metallurgical Transactions A, 24, 2787-2802. https://doi.org/10.1007/BF02659502
Li, H.Q., Yan, J.H. and Wu, H.J. (2009) Modelling and Simulation of Bulk Metallic Glass Production Process with Suction Casting. Materials Science and Technology, 25, 425-431. https://doi.org/10.1179/174328408X270248
Wang, B., et al. (2010) Simulation of Solidification Microstructure in Twin-Roll Casting Strip. Computational Materials Science, 49, S135-S139. https://doi.org/10.1016/j.commatsci.2010.01.051
Lindgren, L.-E., et al. (2016) Simulation of Additive Manufacturing Using Coupled Constitutive and Microstructure Models. Additive Manufacturing.
Markl, M. and Körner, C. (2016) Multiscale Modeling of Powder Bed-Based Additive Manufacturing. Annual Review of Materials Research, 46, 93-123. https://doi.org/10.1146/annurev-matsci-070115-032158
Fan, Z., et al. (2007) Numerical Simulation of the Evolution of Solidification Microstructure in Laser Deposition. Proceedings of the 18th Annual Solid Freeform Fabrication Symposium, Austin, TX, 6-8 August 2007, 256-265.
Zhu, M.F., Lee, S.Y. and Hong, C.P. (2004) Modified Cellular Automaton Model for the Prediction of Dendritic Growth with Melt Convection. Physical Review E, 69, Article ID: 061610. https://doi.org/10.1103/PhysRevE.69.061610
Kelly, P.M. and Zhang, M.-X. (2006) Edge-to-Edge Matching—The Fundamentals. Metallurgical and Materials Transactions A, 37, 833-839. https://doi.org/10.1007/s11661-006-0056-4
Kelly, P. and Zhang, M.-X. (1999) Edge-to-Edge Matching—A New Approach to the Morphology and Crystallography of Precipitates. In Materials Forum.
Christian, J.W. (2002) The Theory of Transformations in Metals and Alloys. Elsevier Science, Kidlington, Oxford, UK.
Zheng, B., et al. (2008) Thermal Behavior and Microstructural Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part I. Numerical Calculations. Metallurgical and Materials Transactions A, 39, 2228-2236. https://doi.org/10.1007/s11661-008-9557-7
King, W., et al. (2015) Overview of Modelling and Simulation of Metal Powder Bed Fusion Process at Lawrence Livermore National Laboratory. Materials Science and Technology, 31, 957-968. https://doi.org/10.1179/1743284714Y.0000000728
Khairallah, S.A., et al. (2016) Laser Powder-Bed Fusion Additive Manufacturing: Physics of Complex Melt Flow and Formation Mechanisms of Pores, Spatter, and Denudation Zones. Acta Materialia, 108, 36-45. https://doi.org/10.1016/j.actamat.2016.02.014
Rafique, M.M.A. and Iqbal, J. (2009) Modeling and Simulation of Heat Transfer Phenomena during Investment Casting. International Journal of Heat and Mass Transfer, 52, 2132-2139. https://doi.org/10.1016/j.ijheatmasstransfer.2008.11.007
Bennon, W.D. and Incropera, F.P. (1987) A Continuum Model for Momentum, Heat and Species Transport in Binary Solid-Liquid Phase Change Systems—I. Model Formulation. International Journal of Heat and Mass Transfer, 30, 2161-2170. https://doi.org/10.1016/0017-9310(87)90094-9
Voller, V.R., Brent, A.D. and Prakash, C. (1989) The Modelling of Heat, Mass and Solute Transport in Solidification Systems. International Journal of Heat and Mass Transfer, 32, 1719-1731. https://doi.org/10.1016/0017-9310(89)90054-9
Ganesan, S. and Poirier, D.R. (1990) Conservation of Mass and Momentum for the Flow of Interdendritic Liquid during Solidification. Metallurgical Transactions B, 21, 173-181. https://doi.org/10.1007/BF02658128
Ni, J. and Beckermann, C. (1991) A Volume-Averaged Two-Phase Model for Transport Phenomena during Solidification. Metallurgical Transactions B, 22, 349-361. https://doi.org/10.1007/BF02651234
Ma, D., et al. (2003) Correlation between Glass Formation and Type of Eutectic Coupled Zone in Eutectic Alloys. Materials Transactions, 44, 2007-2010. https://doi.org/10.2320/matertrans.44.2007
Lee, D.M., et al. (2012) A Deep Eutectic Point in Quaternary Zr-Ti-Ni-Cu System and Bulk Metallic Glass Formation near the Eutectic Point. Intermetallics, 21, 67-74. https://doi.org/10.1016/j.intermet.2011.09.006
Rappaz, M. (1989) Modelling of Microstructure Formation in Solidification Processes. International Materials Reviews, 34, 93-124.
Kurz, W., Giovanola, B. and Trivedi, R. (1986) Theory of Microstructural Development during Rapid Solidification. Acta Metallurgica, 34, 823-830. https://doi.org/10.1016/0001-6160(86)90056-8
Trivedi, R., Magnin, P. and Kurz, W. (1987) Theory of Eutectic Growth under Rapid Solidification Conditions. Acta Metallurgica, 35, 971-980. https://doi.org/10.1016/0001-6160(87)90176-3
Basak, A., Acharya, R. and Das, S. (2016) Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization. Metallurgical and Materials Transactions A, 47, 3845-3859. https://doi.org/10.1007/s11661-016-3571-y
Avrami, M. (1939) Kinetics of Phase Change. I General Theory. The Journal of Chemical Physics, 7, 1103-1112. https://doi.org/10.1063/1.1750380
Price, C.W. (1987) Simulations of Grain Impingement and Recrystallization Kinetics. Acta Metallurgica, 35, 1377-1390. https://doi.org/10.1016/0001-6160(87)90020-4
Zou, J. (1989) Simulation de la solidification eutectique équiaxe.
Thévoz, P., Desbiolles, J.L. and Rappaz, M. (1989) Modeling of Equiaxed Microstructure Formation in Casting. Metallurgical Transactions A, 20, 311-322. https://doi.org/10.1007/BF02670257
Stefanescu, D. (2015) Science and Engineering of Casting Solidification. Springer, New York. https://doi.org/10.1007/978-3-319-15693-4
Kurz, W. and Fisher, D.J. (1986) Fundamentals of Solidification. Trans Tech Publications, Zurich.
Chalmers, B. (1970) Principles of Solidification. In: Low, W. and Schieber, M., Eds., Applied Solid State Physics, Springer, Boston, MA, 161-170. https://doi.org/10.1007/978-1-4684-1854-5_5
Rappaz, M. and Blank, E. (1986) Simulation of Oriented Dendritic Microstructures Using the Concept of Dendritic Lattice. Journal of Crystal Growth, 74, 67-76. https://doi.org/10.1016/0022-0248(86)90249-6
Spittle, J.A. and Brown, S.G.R. (1989) Computer Simulation of the Effects of Alloy Variables on the Grain Structures of Castings. Acta Metallurgica, 37, 1803-1810. https://doi.org/10.1016/0001-6160(89)90065-5
Brown, S.G.R. and Spittle, J.A. (1989) Computer Simulation of Grain Growth and Macrostructure Development during Solidification. Materials Science and Technology, 5, 362-368. https://doi.org/10.1179/mst.1989.5.4.362
Anderson, M.P., et al. (1984) Computer Simulation of Grain Growth—I. Kinetics. Acta Metallurgica, 32, 783-791. https://doi.org/10.1016/0001-6160(84)90151-2
González, S. (2015) Role of Minor Additions on Metallic Glasses and Composites. Journal of Materials Research, 31, 76-87. https://doi.org/10.1557/jmr.2015.319
Porter, D.A. and Easterling, K.E. (1992) Phase Transformations in Metals and Alloys. 3rd Edition (Revised Reprint), Taylor & Francis, Boca Ranton. https://doi.org/10.1007/978-1-4899-3051-4
Song, H., et al. (2016) Simulation Study of Heterogeneous Nucleation at Grain Boundaries during the Austenite-Ferrite Phase Transformation: Comparing the Classical Model with the Multi-Phase Field Nudged Elastic Band Method. Metallurgical and Materials Transactions A, 1-9.
Hunt, J.D. (1984) Steady State Columnar and Equiaxed Growth of Dendrites and Eutectic. Materials Science and Engineering, 65, 75-83. https://doi.org/10.1016/0025-5416(84)90201-5
Welk, B.A., et al. (2014) Phase Selection in a Laser Surface Melted Zr-Cu-Ni-Al-Nb Alloy. Metallurgical and Materials Transactions B, 45, 547-554. https://doi.org/10.1007/s11663-013-9907-8
Acharya, R. and Das, S. (2015) Additive Manufacturing of IN100 Superalloy Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair: Process Development, Modeling, Microstructural Characterization, and Process Control. Metallurgical and Materials Transactions A—Physical Metallurgy and Materials Science, 46a, 3864-3875.
Choudhury, A., et al. (2012) Comparison of Phase-Field and Cellular Automaton Models for Dendritic Solidification in Al-Cu Alloy. Computational Materials Science, 55, 263-268. https://doi.org/10.1016/j.commatsci.2011.12.019
Zaeem, M.A., Yin, H. and Felicelli, S.D. (2012) Comparison of Cellular Automaton and Phase Field Models to Simulate Dendrite Growth in Hexagonal Crystals. Journal of Materials Science & Technology, 28, 137-146. https://doi.org/10.1016/S1005-0302(12)60034-6
Tan, W., Bailey, N.S. and Shin, Y.C. (2011) A Novel Integrated Model Combining Cellular Automata and Phase Field Methods for Microstructure Evolution during Solidification of Multi-Component and Multi-Phase Alloys. Computational Materials Science, 50, 2573-2585. https://doi.org/10.1016/j.commatsci.2011.03.044
St John, D.H., et al. (2011) The Interdependence Theory: The Relationship between Grain Formation and Nucleant Selection. Acta Materialia, 59, 4907-4921. https://doi.org/10.1016/j.actamat.2011.04.035
Maxwell, I. and Hellawell, A. (1975) A Simple Model for Grain Refinement during Solidification. Acta Metallurgica, 23, 229-237. https://doi.org/10.1016/0001-6160(75)90188-1
Acharya, R., et al. (2012) Computational Modeling and Experimental Validation of Microstructural Development in Superalloy Cmsx-4 Processed through Scanning Laser Epitaxy. Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing, 2711-2722.
Gandin, C.-A., et al. (1999) A Three-Dimensional Cellular Automation-Finite Element Model for the Prediction of Solidification Grain Structures. Metallurgical and Materials Transactions A, 30, 3153-3165. https://doi.org/10.1007/s11661-999-0226-2
Kelton, K.F. (1998) A New Model for Nucleation in Bulk Metallic Glasses. Philosophical Magazine Letters, 77, 337-344. https://doi.org/10.1080/095008398178318
Blázquez, J.S., et al. (2008) Instantaneous Growth Approximation Describing the Nanocrystallization Process of Amorphous Alloys: A Cellular Automata Model. Journal of Non-Crystalline Solids, 354, 3597-3605. https://doi.org/10.1016/j.jnoncrysol.2008.03.038
Gránásy, L. (1993) Quantitative Analysis of the Classical Nucleation Theory on Glass-Forming Alloys. Journal of Non-Crystalline Solids, 156, 514-518. https://doi.org/10.1016/0022-3093(93)90010-U
Guo, G.-Q., et al. (2016) Structure-Induced Microalloying Effect in Multicomponent Alloys. Materials & Design, 103, 308-314. https://doi.org/10.1016/j.matdes.2016.04.084
Nandi, U.K., et al. (2016) Composition Dependence of the Glass Forming Ability in Binary Mixtures: The Role of Demixing Entropy. The Journal of Chemical Physics, 145, Article ID: 034503. https://doi.org/10.1063/1.4958630
Raabe, D. (2004) Overview of the Lattice Boltzmann Method for Nano- and Microscale Fluid Dynamics in Materials Science and Engineering. Modelling and Simulation in Materials Science and Engineering, 12, R13. https://doi.org/10.1088/0965-0393/12/6/R01
Sun, D., et al. (2009) Lattice Boltzmann Modeling of Dendritic Growth in a Forced Melt Convection. Acta Materialia, 57, 1755-1767. https://doi.org/10.1016/j.actamat.2008.12.019
Sun, D.K., et al. (2011) Modelling of Dendritic Growth in Ternary Alloy Solidification with Melt Convection. International Journal of Cast Metals Research, 24, 177-183. https://doi.org/10.1179/136404611X13001912813988
Sun, D.K., et al. (2011) Lattice Boltzmann Modeling of Dendritic Growth in Forced and Natural Convection. Computers & Mathematics with Applications, 61, 3585-3592. https://doi.org/10.1016/j.camwa.2010.11.001
Eshraghi, M., Jelinek, B. and Felicelli, S.D. (2015) Large-Scale Three-Dimensional Simulation of Dendritic Solidification Using Lattice Boltzmann Method. JOM, 67, 1786-1792. https://doi.org/10.1007/s11837-015-1446-0
Asle Zaeem, M. (2015) Advances in Modeling of Solidification Microstructures. JOM, 67, 1774-1775. https://doi.org/10.1007/s11837-015-1488-3
Bao, Y.B. and Meskas, J. (2011) Lattice Boltzmann Method for Fluid Simulations. Department of Mathematics, Courant Institute of Mathematical Sciences, New York University, New York.
Wang, W., Luo, S. and Zhu, M. (2016) Numerical Simulation of Three-Dimensional Dendritic Growth of Alloy: Part II—Model Application to Fe-0.82WtPctC Alloy. Metallurgical and Materials Transactions A, 47, 1355-1366. https://doi.org/10.1007/s11661-015-3305-6
Wang, W., Luo, S. and Zhu, M. (2016) Numerical Simulation of Three-Dimensional Dendritic Growth of Alloy: Part I—Model Development and Test. Metallurgical and Materials Transactions A, 47, 1339-1354. https://doi.org/10.1007/s11661-015-3304-7
Zhang, X., et al. (2012) A Three-Dimensional Cellular Automaton Model for Dendritic Growth in Multi-Component Alloys. Acta Materialia, 60, 2249-2257. https://doi.org/10.1016/j.actamat.2011.12.045
Zhu, M.F. and Stefanescu, D.M. (2007) Virtual Front Tracking Model for the Quantitative Modeling of Dendritic Growth in Solidification of Alloys. Acta Materialia, 55, 1741-1755. https://doi.org/10.1016/j.actamat.2006.10.037
Vermolen, F.J. (2006) Zener Solutions for Particle Growth in Multi-Component Alloys. Delft University of Technology, Faculty of Electrical Engineering, Mathematics and Computer Science, Delft Institute of Applied Mathematics.
Nestler, B. and Choudhury, A. (2011) Phase-Field Modeling of Multi-Component Systems. Current Opinion in Solid State and Materials Science, 15, 93-105. https://doi.org/10.1016/j.cossms.2011.01.003
Alder, B.J. and Wainwright, T.E. (1957) Phase Transition for a Hard Sphere System. The Journal of Chemical Physics, 27, 1208-1209. https://doi.org/10.1063/1.1743957
Wang, X. and Xu, X. (2001) Molecular Dynamics Simulation of Heat Transfer and Phase Change during Laser Material Interaction. Journal of Heat Transfer, 124, 265-274. https://doi.org/10.1115/1.1445289
Metropolis, N., et al. (1953) Equation of State Calculations by Fast Computing Machines. The Journal of Chemical Physics, 21, 1087-1092. https://doi.org/10.1063/1.1699114
Wood, W.W. and Jacobson, J.D. (1957) Preliminary Results from a Recalculation of the Monte Carlo Equation of State of Hard Spheres. The Journal of Chemical Physics, 27, 1207-1208. https://doi.org/10.1063/1.1743956
Pusztai, L. and Sváb, E. (1993) Structure Study of Ni62Nb38 Metallic Glass Using Reverse Monte Carlo Simulation. Journal of Non-Crystalline Solids, 156, 973-977. https://doi.org/10.1016/0022-3093(93)90108-A
Hwang, J., et al. (2012) Nanoscale Structure and Structural Relaxation in Zr50Cu45Al5 Bulk Metallic Glass. Physical Review Letters, 108, Article ID: 195505. https://doi.org/10.1103/PhysRevLett.108.195505
Parr, R.G., Craig, D.P. and Ross, I.G. (1950) Molecular Orbital Calculations of the Lower Excited Electronic Levels of Benzene, Configuration Interaction Included. The Journal of Chemical Physics, 18, 1561-1563. https://doi.org/10.1063/1.1747540
Gilbert, A. (2007) Introduction to Computational Quantum Chemistry: Theory. University Lecture.
Perim, E., et al. (2016) Spectral Descriptors for Bulk Metallic Glasses Based on the Thermodynamics of Competing Crystalline Phases. Nature Communications, 7, Article ID: 12315. https://doi.org/10.1038/ncomms12315
Wang, X.D., et al. (2015) Atomic Picture of Elastic Deformation in a Metallic Glass. Scientific Reports, 5, 9184. https://doi.org/10.1038/srep09184
Zheng, G.-P. (2012) A Density Functional Theory Study on the Deformation Behaviors of Fe-Si-B Metallic Glasses. International Journal of Molecular Sciences, 13, 10401-10409. https://doi.org/10.3390/ijms130810401
Daw, M.S. and Baskes, M.I. (1984) Embedded-Atom Method: Derivation and Application to Impurities, Surfaces, and Other Defects in Metals. Physical Review B, 29, 6443. https://doi.org/10.1103/PhysRevB.29.6443