Second Law Analysis of Forced Convective Cooling in a Channel with a Heated Wall Mounted Obstacle
- 1 Mechanical Engineering Department, Shahid Bahonar University, Kerman, Iran
- 2 Mechanical Engineering Department, Shahid Bahonar University, Kerman, Iran
- 3 Mechanical Engineering Department, Shahid Bahonar University, Kerman, Iran
Abstract
The present work details a numerical simulation of forced convective laminar flow in a channel with a heated obstacle attached to one wall. The second law analysis is employed to investigate the distribution of entropy generation in the flow domain to demonstrate the rate of irreversibilities in thermal system. The conjugate problem including the convection heat transfer in the fluid flow and conduction one inside the obstacle is solved numerically to obtain the velocity and temperature fields in both gas and solid phases. To reach this goal, the set of governing equations including momentum and energy equations for the gas phase and conduction equation for the obstacle are solved by CFD technique to determine the hydrodynamic and thermal behaviors of the fluid flow around the obstacle and the temperature distribution in the solid element. An attempt is made to detail the local Nusselt number distribution and mean Nusselt number and also the local entropy generation distribution for the individual exposed obstacle faces. A good consistency is found between the present numerical results with experiment.
- T. J. Young and K. Vafai, “Convection Cooling of a Heated Obstacle in a Channel,” International Journal of Heat and Mass Transfer, Vol. 41, No. 20, 1998, pp. 3131- 3148. doi:10.1016/S0017-9310(97)00323-2
- T. J. Young and K. Vafai, “Convective Flow and Heat Transfer in a Channel Containing Multiple Heated Obstacles,” International Journal of Heat and Mass Transfer, Vol. 41, No. 21, 1998, pp. 3279-3298. doi:10.1016/S0017-9310(98)00014-3
- T. J. Young and K. Vafai, “Experimental and Numerical Investigation of Forced Convective Characteristic of Arrays of Channel Mounted Obstacles,” Journal of Heat Transfer, Vol. 121, No. 1, 1999, pp. 34-42.
- C. H. Cheng and W. H. Huang, “Numerical Prediction for Laminar Forced Convection in Parallel-Plate Channel with Transverse Fin Array,” International Journal of Heat and Mass Transfer, Vol. 34, No. 11, 1991, pp. 2739- 2749. doi:10.1016/0017-9310(91)90232-4
- M. G. Carvalho, F. Durst and J. C. F. Pereira, “Prediction and Measurements of Laminar over Two-Dimensional Obstacles,” Applied Mathematical Modelling, Vol. 11, No. 1, 1987, pp. 23-34.
- Z. Chen, Q. Li, D. Meier and H. J. Warnecke, “Convective Heat Transfer and Pressure Loss in Rectangular Duct with Drop-Shaped Pin Fins,” Heat and Mass Transfer, Vol. 33, No. 3, 1997, pp. 219-224. doi:10.1007/s002310050181
- A. Korichi and L. Oufer, “Numerical Heat Transfer in a Rectangular Channel with Mounted Obstacles on Upper and Lower Walls,” International Journal of Thermal Sciences, Vol. 44, No. 7, 2005, pp. 644-655. doi:10.1016/j.ijthermalsci.2004.12.003
- Q. Li, Z. Chen, U. Flechtner and H. J. Warnecke, “Heat Transfer and Pressure Drop Characteristics in Rectangular Channel with Elliptic Fins,” International Journal of Heat and Fluid Flow, Vol. 19, No. 3, 1998, pp. 245-250. doi:10.1016/S0142-727X(98)00003-4
- A. Bejan, “Entropy Generation through Heat and Fluid Flow,” Wiley, New York, 1982.
- C. H. Cheng and W. H. Huang, “Entropy Generation and Heat Transfer via Laminar Forced-Convection Channel Flow over Transverse Fins in Entrance Regions,” Applied Energy, Vol. 32, No. 4, 1989, pp. 241-267. doi:10.1016/0306-2619(89)90015-9
- T. H. Ko and C. S. Cheng, “Numerical Investigation on Developing Laminar Forced Convection and Entropy Generation in a Wavy Channel,” International Communications in Heat and Mass Transfer, Vol. 34, No. 8, 2007, pp. 924-933. doi:10.1016/j.icheatmasstransfer.2007.05.021