Natural Convection through Air Filter Media for Cooling of Remote Radio Heads
- 1 Wireless R&D, Alcatel Lucent, Swindon, United Kingdom
- 2 Wireless R&D, Alcatel Lucent, Swindon, United Kingdom
Abstract
Passive cooling techniques are cost effective and reliable methods of cooling remote radio heads (RRH). This paper investigates the plausibility of a passive cooling technique involving exchanging warm air, from the internal cavity of RRHs, with fresh ambient air, to reduce the operating temperature using natural convection across air filters. The results indicate that, an internal air filter tube structure, with width of the enclosure, running vertically up the middle of an RRH, along with 4 pleat filter sides (2.0 ± 0.5 cm separation) provides the most effective outdoor suitable setup out of those examined. This provides a reduction in temperature of 3.9° K ± 0.4° K in the PA and 4.0° K ± 0.4° K in the radio, and a reduction in mass of 0.45 ± 0.05 kg, and is capable of withstanding water ingress and corrosive conditions including wind driven rain and salt fog.
- Ohring, M. (1998) Reliability and Failure of Electronic Materials and Devices. Academic Press, San Diego, 214-215.
- McCluskey, P. and Grzybowski, R.R. (1998) Reliability Concerns in High Temperature Electronic Systems. Proceedings of High-Temperature Electronic Materials, Devices and Sensors Conference, San Diego, 22-27 February 1998, 199-200.
- Zapach, T.G. (2009) Thermal and Mechanical Design Considerations. www.tektelic.com/white-paper.pdf
- Chung, D.D.L. (2001) Thermal Interface Materials. Journal of Materials Engineering and Performance, 10, 56-59.
- W.L. Gore & Associates, Inc. (2013) GORE® Cooling Filters—ABS Standard Filter Product.
- Universal Air Filter (2012) Quadrafoam TM Air Filters NEBS FF-5x, FF-3 Universal Air Filter.