Experimental Investigation of the Fluid Dynamics of a Finned Heat Sink under Operating Conditions
- 1 ENDIF—ENgineering Department In Ferrara, Università di Ferrara, Ferrara, Italia
- 2 School of Engineering and Design, Brunel University, Uxbridge, UK
- 3 ENDIF—ENgineering Department In Ferrara, Università di Ferrara, Ferrara, Italia
Abstract
An experimental study has been made of the fluid dynamics performance of electronic equipment designed to cool a heat sink in the form of a finned duct. The apparatus consists of a channel of rectangular section containing the finned duct. A forced airflow is driven by three fans placed in parallel in the inlet and in the outlet sections of the channel. In order to investigate a full range of flow rates, different sets of fans were used in the inlet section. Measurements were made of static pressures at different channel positions by pressure taps connected to a micro manometer, and of the flow rate by a Venturi meter. The experimental working conditions of the active fans were consistent with the manufacturers’ characteristic curves. Values of the local friction coefficient compared well with published correlations. The experimental working points agreed very well with the theoretical curve of the pressure drop and the hydraulic diameter was demonstrated to be of the appropriate size for this fluid dynamics problem.
- Saini, M. and Webb, R.L. (2002) Validation of Models for Air Cooled Plane Fin Heat Sinks Used in Computer Cooling. Proceedings of ITHERM 2002, 8th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, San Diego, 1 June 2002, 243-250. http://dx.doi.org/10.1109/ITHERM.2002.1012464
- Webb, R.L. (2006) Entrance and Exit Losses for Developing Flow in Parallel Plate Channel. Heat Transfer Engineering, 27, 30-35. http://dx.doi.org/10.1080/01457630600904650
- Shah, R.K. and London, A.L. (1978) Laminar Flow Forced Convection in Ducts. Supplement 1 to Advances in Heat Transfer. Academic Press, NY.
- Muzychka, Y.S. and Yovanovich, M.M. (1998) Modelling Friction Factors in Non-Circular Ducts for Developing Laminar Flow. Proceedings of 2nd AIAA Theoretical Fluid Mechanics Meeting, Albuquerque, 15-18 June 1998, AIAA Paper No. 98-2492.
- Muzychka, Y.S. and Yovanovich, M.M. (2009) Pressure Drop in Laminar Developing Flow in Noncircular Ducts: A Scaling and Modeling Approach. Journal of Fluids Engineering, 131, Article ID: 111105. http://dx.doi.org/10.1115/1.4000377
- Ebadian, M.A. and Dong, Z.F. (1998) Forced Convection, Internal Flow in Ducts. In: Rosenhow, W.M., Hartnett, J.P. and Cho, Y.I., Eds., Handbook of Heat Transfer, McGraw-Hill, New York.
- White, F.M. (1987) Fluid Mechanics. McGraw-Hill, New York.
- Kays, W.M. and London, A.L. (1998) Compact Heat Exchangers. 3rd Edition, McGraw-Hill, New York.
- Idelchik, I.E. (1996) Handbook of Hydraulic Resistance. 3rd Edition, Begell House Inc., New York.
- Pagliarini, G. and Piva, S. (1993) Thermal Property Estimation by Comparison between Experimental and Analytical or Numerical Solutions. Proceedings of 6th International Conference on Computational Methods and Experimental Measurements, 1, 429-438.
- Moffat, R.J. (1994) Establishing the Credibility of Experimental Work. Experimental Thermal and Fluid Science, 8, (Inside Back Cover).