Metal-Ceramic Smart Composite in Ti(C,N)-Ni-Mo-W System
- 1 Department of Chemical and Biological Technologies, Georgian Technical University, Tbilisi, Georgia
- 2 Department of Chemical and Biological Technologies, Georgian Technical University, Tbilisi, Georgia
- 3 Department of Chemical and Biological Technologies, Georgian Technical University, Tbilisi, Georgia
- 4 Department of Chemical and Biological Technologies, Georgian Technical University, Tbilisi, Georgia
- 5 Department of Chemical and Biological Technologies, Georgian Technical University, Tbilisi, Georgia
Abstract
Goal: Low wolfram-containing cutting composite was obtained by fusion of titanium carbonitride and high melting temperature binding metallic phase. Method: The composite was obtained via compaction and further sintering in vacuum furnace at 1600 ° C under 10 -3 Pa pressure. Phase analysis was performed on X-ray apparatus “DRON-3”; microstructure was determined by electron microscope NANOLAB-7, microhardness by MUCKE-mark microhardness meter; relative resistance of cutters was evaluated at similar modes of cutting according to distances they passed; experiments were carried out on turning lathe. Results: Physical-mechanical characteristics of the obtained composite are: σ bend , = 1000 - 1150 MPa, σ bend1000 ° C = 600 MPa, HV = 14 GPa; HV 1000 ° C = 6.5 GPa. High speeds of cutting and high temperatures resistance of cutters made by the obtained composites exceeds 1.5 - 2-folds that of cutters made of the known BK8 and KNT20 hard alloys. Conclusion: Its application is recommended in hot steel treatment by cutting, for removal of the so-called burrs, as well as in steel treatment by cutting during pure and semi-pure operations. It can also be used in jet engines, chemical industry apparatuses, electric-vacuum devices, in industry of responsible details of rockets, nuclear reactors, flying apparatuses.
- Shlishevsky, B.E. and Larina, T.C. (2007) Wolframfree Solid Alloys and Prospects of Their Application in Optic Sphere of Instrument Engineering. Interexpo Geo Siberia, 4, 1-7.
- Grubyj, S.V. (1984) Elevation of Efficiency of Lathe Treatment of Steels by Cutting Tools Made of Wolframfree Solid Alloys. Abstract of a Thesis for a Scientific Degree of a Candidate of Technical Sciences, Moscow.
- Zubkov, N.N. (2013) Tool Materials for Making Edge Tools. Science and Education: Electronic Scientific-Technical Edition, 75-97.
- Vereshchaka, A.S. and Kushner, V.S. (2009) Material Cutting. М., Vysshaya Shkola, 539.
- Smith, G.T. (2002) Industrial Metrology-Surfaces and Roundness. Springer-Verlag, 336.
- Smith, G. (2008) Cutting Tool Technology: Industrial Handbook. Springer-Verlag London Limited, London, 559.
- Loladze, T.N., Totchiev, F.G. and Tkemaladze, G.N. (1980) Some Features of Brittle Failure of Cutting Tools. Proceedings of the International MTOR Conference, Swancea, 297-303.
- Loladze, T.N. (1982) Durability and Wear Resistance of Cutting Tools. M., Machine Building, 320.
- Loladze, T.N. (1980) Major Directions of Development of Metalworking by Cutting. Herald of Machine Building, No. 11, 40-41.
- Mikanadze, A.I. (1983) Cutting Properties and Application of Low Wolfram Alloys with High Temperature Bonds. Abstract of a Candidate’s Thesis, Georgian Technical University, Tbilisi, 30.
- Loladze, T.N. (1977) Scientific Bases for Creation of Efficient Tool Materials on the Base of T and TP Alloys. Abstracts of Reports of All-Union Symposium: Problems of Creation and Inculcation of Highly Efficient Cutting Tool with Reduced Wolfram Concentration, Tbilisi, 57-69.
- Kowsiridze, Z., Kiknadze, N., Hainrich, J., Goerke, R. and Tabatadze, G. (2010) Structural Research of Al2O3-TiC System Nanoceramic Composite Material. The First International Conference for Students and Young Scientists on Materials Processing Science, Tbilisi, 10-13 October 2010, 66-72.
- Kowsiridze, Z., Nizharadze, N., Tabatadze, G., Nikoleisvili, E., Mestvirisvili, Z. and Kinkladze, V. (2011) Multifunctional Heteromodulus Composites in the B4C-BN-TiC-SiC-C System. Journal of the European Ceramic Society, 31, 1921-1926.
- Kowsiridze, Z., Jalabadze, N. and Tabatadze, G. (2012) B4C and Al2O3 Based Composites. The 2nd International Conference for Students and Young Scientists on Materials Processing Science, Tbilisi, 10-13 October 2012, 150-156.