Research ArticleOpen AccessGoogle Scholar indexed
Numerical Study of Fluid Flow over Bundle Tubes
Department of Mechanical and Materials Engineering, Florida International University, Miami, FL, USA
Department of Marine Engineering, King AbdulAziz University, Jeddah, Kingdom of Saudi Arabia
- 1 Department of Mechanical and Materials Engineering, Florida International University, Miami, FL, USA
- 2 Department of Marine Engineering, King AbdulAziz University, Jeddah, Kingdom of Saudi Arabia
Journal of Electronics Cooling and Thermal Control·Volume 06 (2016)·Pages 109–119·Published 8 September 2016·DOI10.4236/jectc.2016.63010
Copy link · social · email
Abstract
In this paper, a bank of tubes containing a flowing fluid which is immersed in a cross flow second medium of fluid with different temperature has been studied numerically using computational fluid dynamics. Laminar steady flow with a low Reynolds number has been studied in this work. Inlet mass flow rate and the bulk temperature are known and numerical method has been implemented to study the convective heat transfer to investigate the temperature and flow fields. Effects of different inlet bulk temperatures and mass flow rates have been investigated on temperature and pressure variations.
KeywordsHeat TransferBundle TubeMass Flow RateNumerical Solution
- Shan, R.K. and Bhatti, M.S. (1987) Laminar Convective Heat Transfer in Ducts, Hand Book of Single-Phase Convective Heat Transfer. Wiley Interscience, New York
- Colburn, A.P. (1933) A Method of Correlating Forced Convection Heat Transfer Data and A Comparison with Fluid Friction. International Journal of Heat and Mass Transfer, 7, 1359-1384. http://dx.doi.org/10.1016/0017-9310(64)90125-5
- Sieder, E.N. and Tate, G.E. (1936) Heat Transfer and Pressure Drop of Liquids in Tubes. Industrial & Engineering Chemistry Research, 28, 1429-1435. http://dx.doi.org/10.1021/ie50324a027
- Gough, M.J. (2011) Process Heat Transfer Enhancement to Upgrade Performance, Throughput and Reduced Energy Use. Chemical Engineering Transactions, 29, 1-6.
- Wang, Y., He, Y.L., Mei, D.H. and Tao, W.Q. (2011) Optimization Design of Slotted Fin by Numerical Simulation Coupled with Genetic Algorithm. Applied Energy, 88, 4441-4450. http://dx.doi.org/10.1016/j.apenergy.2011.05.030
- Yayla, S. (2013) Flow Characteristic of Staggered Multiple Slotted Tubes in the Passage of a Fin Tube Heat Exchanger. Strojniski Vestnik-Journal of Mechanical Engineering, 59, 462-472. http://dx.doi.org/10.5545/sv-jme.2012.902
- Ribatski, G. and Jacobi, A.M. (2005) Falling Film Evaporation on Horizontal Tubes—A Critical Review. International Journal of Refrigeration, 28, 635-653. http://dx.doi.org/10.1016/j.ijrefrig.2004.12.002