Research on Torque-Angle Characteristic of Large Gap Magnetic Drive System
- 1
- 2
- 3
- 4
Abstract
The principle and design method of the large gap magnetic drive system is studied in this work. The calculation model of the torque-angle characteristic in the large gap magnetic drive system driven by traveling wave magnetic field is established. The calculation model is computed by using MATLAB software, and the pattern of the system’s torque-angle characteristic is obtained by analyzing study results. These results indicate that: torque-angle characteristic and the driving torque of the system can be adjusted by changing the electric current of coil, the magnetization of permanent magnetic gear, the inner diameter of permanent magnetic gear, the coupling distance between electromagnet and permanent magnetic gear, the outer diameter of permanent magnetic gear, and the axial length of permanent magnetic gear.
- X. D. Xu, Z. L. Gong, J. P. Tan, “Blood pump driven system based on extracorporeal magnetic filed couple,” Journal of Central South University (Science and Technology), Vol. 38, No. 8, pp. 711–714, 2007.
- P. Zheng and Y. Haik. “Force and torque characteristics for magnetically driven blood pump,” Journal of Magnetism and Magnetic Materials, Vol. 241, pp. 292– 302, 2002.
- F. Karel, “A numerical study of flows driven by a rotating magnetic field in a square container,” European Journal of Mechanics B/Fluids, No. 10, pp. 1–10, 2007.
- H. Zhao, Y. Wang, J. TIan, “Review of study on magnet machine and mechanism,” Chinese Journal of Mechanical Engineering, Vol. 39, No. 12, pp. 311–36, 2003.
- M. Schreiner, “The driving torque of a rotating levitated cylindrical permanent magnet above a superconductor,” Applied Mathematical Modelling, Vol. 31, No. 2, pp. 854–865, 2007.
- M. Takemoto, A. Chiba, H. Akagi, and T. Fukao, “Torque and suspension force in a bearingless switched reluctance motor,” Electrical Engineering, No. 2, pp. 72–82, 2006.
- K. S. Jung and Y. S. Baek, “Precision stage using a non-contact planar actuator based on magnetic suspension technology,” Mechatronics, Vol. 13, No. 4, pp. 981–999, 2003.
- J. P. Tan, Y. Xu, T. X. Li, and Y. L. Liu, “The scheme design and application of large gap magnetic drive system which is driven by traveling wave magnetic field,” IEEE International Conference on Measuring Technology and Mechatronics Automation (ICMTMA’09), Zhangjiajie, China, April 2009.
- L. P. Ren, J. S. Zhao “The distribution pattern of magnetic dipole’s spatial magnetic field,” Hydrographic Surveying and Charting, Vol. 22, No. 2, pp. 18–21, 2002.
- Y. Xu and J. P. Tan, “Calculation method of driving torque of the large gap magnetic drives system,” Journal of Hunan University (Natural Sciences), Vol. 36, No. 7, pp. 30–35, 2005.