Extracting Power Transformer Vibration Features by a Time-Scale-Frequency Analysis Method
- 1
- 2
- 3
- 4
- 5
- 6
- 7
Abstract
In order to take advantage of the merits of WPT and HHT in feature extraction from vibration signals of power transformer, a time-scale-frequency analysis method is developed based on the combination of these two techniques. This method consists of two steps. First, the desirable wavelet packet nodes corresponding to characteristic frequency bands of power transformer are selected through a Correlation Degree Threshold Screening (CDTS) technique for reconstructing a time-domain signal that contains useful information of power transformer. Second, the HHT is then conducted on the reconstructed signal to track the instantaneous frequencies corresponding to natural characteristics of power transformer. Experimental results are provided by analyzing a real power transformer vibration signal. Compared with the features extracted by directly using HHT, the features obtained by the proposed method reveal clearer condition pattern of the transformer, which shows the potential of this method in condition monitoring of power transformer.
- C. Myers, “Transformers condition monitoring by oil analysis,” Large or Small: Contentment or Catastrophe, Proceedings of the 1998 1st IEE/IMeChE International Conference on Power Station Maintenance-Profitability through Reliability, pp. 53–58, 1998.
- S. Ji, “The study of winding and core vibration characteristics and application in fault monitoring of transformer,” PHD Thesis, Xi’an JiaoTong University, China, 2003.
- J. C. Lavalle, “Failure detection in transformers using vibration analysis,” MS Thesis, MIT, Cambridge, MA, USA, 1986.
- Z. Berler, A. Golubev, V. Rusov, et al, “Vibro- acoustic method of transformer clamping pressure monitoring,” Conference Record of the 2000 IEEE International Symposium on Electrical Insulation, Anaheim, CA USA, pp. 263–266, 2000.
- S. Ji, W. Liu, et al, “The application of the wavelet packet to monitor the core and winding condition of transformer based on the vibration analysis method,” Proceedings of Chinese Society for Electrical Engneering, Vol. 21, No. 12, pp. 24–27, 2001.
- P. Kang and D. Birtwhistle, “Condition monitoring of power transformer on-load-tap-changers using wavelet analysis,” IEEE Transactions on Power Delivery, Vol. 16, No. 3, pp. 394–400, 2001.
- Q. Yan, X. Liu, and J. Yin, “Features of Vibration Signal of Power Transformer Using the Wavelet Theory,” High Voltage Engineering, Vol. 33, No. 1, pp. 165–168, 2007.
- W. Xiong and G. Zhao, “Analysis of transformer core vibration characteristics using hilbert-huang transformation,” Transactions of China Electrotechnical Society, Vol. 21, No. 8, pp. 9–13, 2006.
- W. Xiong and R. Ji, “Nonlinear time series analysis of transformer’s core vibration,” The 6th World Congress on Intelligent Control and Automation. Dalian China, pp. 5493–5496, 2006.
- S. Ji, Y. Luo, and Y. Li, “Research on extraction technique of transformer core fundamental frequency vibration based on OLCM,” IEEE Transactions on Power Delivery, Vol. 21, No. 4, pp. 1981–1988, 2006.
- N. E. Huang, Z. Shen, S. R. Long, et al, “The empirical mode decomposition and the hilbert spectrum for nonlinear and non-stationary time series analysis,” Proceedings of Royal Society of London, Series A, pp. 903–994, 1998.
- Z. Peng, P. Tse, and F. Chu, “A comparison study of improved hilbert-huang transform and wavelet transform: Application to fault diagnosis for rolling bearing,” Mechanical Systems and Signal Processing, Vol. 19, No. 5, pp. 974–988, 2005.