This review examines the role of simulation-based virtual laboratories in the teaching of electrical machines and electromagnetics, with particular attention to MATLAB and finite element analysis tools. Three guiding questions frame the discussion: 1) What strategies can mitigate the inherent limitations of these tools? 2) What practical challenges are associated with their implementation? and 3) What historical practices demonstrate their pedagogical value? The findings indicate that the effectiveness of simulation depends largely on the design of tailored instructional materials, which help overcome the constraints of verisimilitude and numerical approximations. Implementation challenges remain significant, especially in terms of licensing costs and institutional readiness, but the availability of student editions of commercial software provides affordable access and prepares graduates for both industry employment and self-employment. Historical evidence confirms that simulation tools enhance students’ understanding by bridging abstract theory with visual and quantitative experimentation. Together, these insights highlight simulation-based laboratories as powerful complements to physical experimentation and as essential components of modern engineering education.
KeywordsElectrical MachinesElectromagnetic Engineering EducationFinite Element AnalysisSimulation Software
Molina-García, A., Gómez, E., Fuentes, J.A. and Villarejo, J. (2010) Experiences in Teaching Electric Drives Based on Basic Modelling Simulations and Industrial A.C. Drive Measurements. International Journal of Electrical Engineering & Education , 47, 416-429. https://doi.org/10.7227/ijeee.47.4.6
Agogino, A.M. (2008) Educating the Engineer of 2020. Proceedings of the 9 th Biennial ASME Conference on Engineering Systems Design and Analysis , Haifa, 7-9 July 2008, 625.
Haertel, T., Terkowsky, C. and Jahnke, I. (2012) Where Have All the Inventors Gone? Is There a Lack of Spirit of Research in Engineering Education Curricula? Proceedings of ICL - IGIP 2012, Interactive Collaborative Learning , Villach, 26-28 September 2012, 1-8. https://doi.org/10.1109/icl.2012.6402085
Kuh, G.D. (2009) The National Survey of Student Engagement: Conceptual and Empirical Foundations. New Directions for Institutional Research, No. 141, Wiley Periodicals, Inc.
Duderstadt, J.J. (2010) Engineering for a Changing World. In: Grasso, D. and Burkins, M.B., Eds., Holistic Engineering Education , Springer, 17-35. https://doi.org/10.1007/978-1-4419-1393-7_3
Nogueira, A.F.L., Weinert, R.L. and Maldonado, L.J.A.S. (2019) Simulated Experiments for Teaching CAD Techniques Using Analytic and Finite Element Solutions of Electromagnetic Two-Dimensional Problems with Longitudinal Symmetry. Journal of Electromagnetic Analysis and Applications , 11, 79-99. https://doi.org/10.4236/jemaa.2019.116006
Zengin, R. and Gençer, N.G. (2016) Lorentz Force Electrical Impedance Tomography Using Magnetic Field Measurements. Physics in Medicine and Biology , 61, 5887-5905. https://doi.org/10.1088/0031-9155/61/16/5887
Nogueira, A.F.L. (2010) A Case Study on Open Boundary Techniques for Electromagnetic Field Problems with Translational Symmetry. Journal of Microwaves , Optoelectronics and Electromagnetic Applications , 9, 20-33.
McFee, J.S. (1989) Accurate and Consistent Force Calculation for Finite Element Magnetics. PhD Thesis, McGill University.
Bottauscio, O., Chiampi, M., Ragusa, C., Rege, L. and Repetto, M. (n.d.) Description of T.E.A.M. Problem: 32. A Test-Case for Validation of Magnetic Field Analysis with Vector Hysteresis. https://www.compumag.org/jsite/images/stories/TEAM/problem32.pdf
Davey, K. (n.d.) Induction Motor Analysis: International T.E.A.M. Workshop Problem 30. https://www.compumag.org/jsite/images/stories/TEAM/problem30a.pdf
Nogueira, A.F.L., Weinert, R.L. and Maldonado, L.J.A.S. (2021) An Introductory Note on Finite Element Problems Based on the Eddy Current Testing Approach. Journal of Electromagnetic Analysis and Applications , 13, 145-159. https://doi.org/10.4236/jemaa.2020.1311011
Acharya, V., Bobba, D., Nategh, S. and Boulanger, P. (2025) A Comprehensive Benchmark of Different Motor Topologies for High-Performance 2-Wheelers Application. 2025 IEEE Workshop on Electrical Machines Design , Control and Diagnosis ( WEMDCD ), Valletta, 9-19 April 2025, 1-6. https://doi.org/10.1109/wemdcd61816.2025.11014158
Sarlioglu, B., Morris, C.T., Han, D. and Li, S. (2015) Benchmarking of Electric and Hybrid Vehicle Electric Machines, Power Electronics, and Batteries. 2015 International Aegean Conference on Electrical Machines & Power Electronics & 2015 International Symposium on Advanced Electromechanical Motion Systems , Side, 2-4 September 2015, 519-526. https://doi.org/10.1109/optim.2015.7426993
Li, J. and Liang, W. (2024) Effectiveness of Virtual Laboratory in Engineering Education: A Meta-Analysis. PLOS ONE , 19, e0316269. https://doi.org/10.1371/journal.pone.0316269
May, D., Auer, M.E. and Kist, A. (2025) Online Laboratories in Engineering and Technology Education: State of the Art and Trends for the Future. Springer Nature.
May, D., Morkos, B., Jackson, A., Hunsu, N.J., Ingalls, A. and Beyette, F. (2022) Rapid Transition of Traditionally Hands-On Labs to Online Instruction in Engineering Courses. European Journal of Engineering Education , 48, 842-860. https://doi.org/10.1080/03043797.2022.2046707
Maas, M.D. (2025) An Up-to-Date Review of the Best Open-Source Projects in Computational Electromagnetics, Including FDTD, FEM and BEM/MoM Methods. https://www.epsilonforge.com/post/open-source-electromagnetics
Lwoga, E.T. and Sangeda, R.Z. (2018) ICT’s and Development in Developing Countries: A Systematic Review of Reviews. The Electronic Journal of Information Systems IN Developing Countries , 85, e12060. https://doi.org/10.1002/isd2.12060
Faulconer, E.K. and Gruss, A.B. (2018) A Review to Weigh the Pros and Cons of Online, Remote, and Distance Science Laboratory Experiences. The International Review of Research in Open and Distributed Learning , 19, 155-168. https://doi.org/10.19173/irrodl.v19i2.3386
New License for MATLAB Student. https://www.mathworks.com/store/link/products/student/SV?s_tid=ac_buy_sv_but1
Calado, M.R.A., Espírito‐Santo, A.E.V., Salvado, J.A.C., Cabrita, C.M.P. and Mariano, S.J.P.S. (2015) Using Finite Element Method Based Software to Teach Electrical Machines—The Linear Switched Reluctance Actuator. Computer Applications in Engineering Education , 23, 824-836. https://doi.org/10.1002/cae.21653
Prasad, N., Jain, S. and Gupta, S. (2020) An Educational Tool Based on Finite Element Method for Electromagnetic Study. International Journal of Electrical Engineering & Education , 58, 828-848. https://doi.org/10.1177/0020720920940572
Nogueira, A.F.L., da Costa, V.H.P. and Weinert, R.L. (2017) Simulated Experiments for Teaching Mutually-Coupled Circuits CAD Techniques Using Analytic and Finite Element Solutions. Journal of Electromagnetic Analysis and Applications , 9, 183-202. https://doi.org/10.4236/jemaa.2017.911016
Aryadi, W., Setiyawan, A. and Sulistyo, R. (2023) Orbital Performance Simulation of Ring Type Electro Motor Compared with Radial Motor Using Magnet Software. VANOS Journal of Mechanical Engineering Education , 8, 66-77. https://doi.org/10.30870/vanos.v8i1.18970
Gupta, C., Marwaha, S. and Manna, M.S. (2009) Finite Element Method as an Aid to Machine Design: A Computational Tool. Excerpt from the Proceedings of the COMSOL Conference 2009 Bangalore.
Meeker, D.C. (2018) Finite Element Method Magnetics, User’s Manual, Version 4.2. http://www.femm.info/wiki/HomePage
Moses, A., Anderson, P., Jenkins, K. and Stanbury, H. (2019) Electrical Steels, Volume 1: Fundamentals and Basic Concepts. The IET Digital Library. https://doi.org/10.1049/PBPO157F
Licarião Nogueira, A.F., Weinert, R.L. and Maldonado, L.J.A.S. (2021) Finite Element CAD Experiments on the Effect of Magnetic Loss in Power Transformers with Laminated Cores. Journal of Electromagnetic Analysis and Applications , 13, 1-19. https://doi.org/10.4236/jemaa.2021.131001
Nogueira, A.F.L. and Maldonado, L.J.A.S. (2013) Analysis of AC Contactors Combining Electric Circuits, Time-Harmonic Finite Element Simulations and Experimental Work. International Journal of Research and Reviews in Applied Sciences , 14, 513-525.
Silvester, P.P. and Ferrari, R.L. (1990) Finite Element for Electrical Engineers. 2nd Edition, Cambridge University Press.
QuickField: A New Approach to Field Modelling. https://quickfield.com/free_soft.htm
Ansys for Students. https://www.ansys.com/academic/students