Research ArticleOpen AccessGoogle Scholar indexed
Design of Bidirectional Coupling Circuit for Broadband Power-Line Communications
Department of Electronics and Communication Engineering, Durgapur Institute of Advanced Technology & Management, Durgapur, India
- 1 Department of Electronics and Communication Engineering, Durgapur Institute of Advanced Technology & Management, Durgapur, India
- 2
- 3
Journal of Electromagnetic Analysis and Applications·Volume 04 (2012)·Pages 162–166·Published 24 April 2012·DOI10.4236/jemaa.2012.44021
Copy link · social · email
Abstract
This paper deals with the design of bidirectional coupler for broadband power line communication and the impedance matching technique with the power line. This coupler can be used for both transmitting and receiving the data, acting as transceiver. The impedance mismatching problem is also solved here using line trap circuit. The coupler circuit is capable of transmitting or receiving modulated signals with carrier frequency of 15 MHz which can be used for domestic as well as distribution power networks. Laboratory prototype tested using power line network consists of electrical household appliances and results show that the circuit is able to facilitate bidirectional band pass transmission.
KeywordsCoupling CircuitsLine Trap CircuitBroadband
- P. A. J. van Rensburg, “Design of a Bidirectional Impedance-Adapting Transformer Coupling Circuit for Low-Voltage Power-Line Communications,” IEEE Transactions on Power Delivery, Vol. 20, No. 1, 2005, pp. 64-70. doi:10.1109/TPWRD.2004.835260
- DOMOLOGIC, “Konnex PL132—Power-Line-Communication using the CENELEC-C-Band,” DOMOLOGIC Home Automation GmbH, 2003.
- P. Langfeld and K. Dostert, “OFDM System Synchronisation for Powerline Communications,” Proceedings of 4th International Symposium on Power-Line Communications and its Applications, Limerick, 5-7 April 2000, pp. 15-22.
- American National Standard, “IEEE Guide for Power-Line Carrier Applications,” ANSI/IEEE Std. 643-1980, 1981.
- R. L. Ozenbaugh, “EMI Filter Design,” 2nd Edition, Marcel Dekker Inc., New York, 2001.
- P. L. So and Y. H. Ma, “Development of a Test Bed for Powerline Communication,” IEEE Transactions on Consumer Electronics, Vol. 50, No. 4, 2004, pp. 1174-1182. doi:10.1109/TCE.2004.1362516
- M. Zimmermann and K. Dostert, “A Multipath Model for the Power Line Channel,” IEEE Transactions on Communication, Vol. 50, No. 4, 2002, pp. 553-559. doi:10.1109/26.996069