Research ArticleOpen AccessGoogle Scholar indexed
Magnetic Oil Thermal Behavior under Electromagnetic Induction for Energy Efficient Heating System Design
- 1
- 2
Journal of Electromagnetic Analysis and Applications·Volume 02 (2010)·Pages 297–300·Published 2 June 2010·DOI10.4236/jemaa.2010.25038
Copy link · social · email
Abstract
This study describes thermal behavior of magnetic lubricant oil under electromagnetic induction. Experimental set up include oil pump, oil tank, induction heating unit, and heat exchanger. It is a closed loop system where the oil pump circulates oil through oil tank to the system, at the same time induction heating unit heats up to the heat exchanger where the lubricant oil thermal behavior is examined. The unit has been largely studied and tested both magnetic and regular motor oil in a laboratory environment and promising results have been obtained for an actual indoor floor to space heating system design.
KeywordsElectromagnetic InductionElectroheatLubricant OilHeat TransferFluid DynamicsInduction Heated IronRadiant Heater
- “Heat Treating,” Metals Handbook, 9th Edition, American Society for Metals, Vol. 4, 1981.
- S. L. Semiatin and D. E. Stutz, “Induction Heat Treating of Steel,” American Society for Metals, 1986.
- A. Kucukkomurler, “Environmental, Low Cost, Energy Efficient Electromagnetic Indoor Induction Space Heating System Design,” IEEE Eurocon 2009, Saint Petersburg, 2009, pp. 1604-1606.
- C. A. Tudbury, “Basics of Induction Heating,” John F. Rider, Inc., New Rochelle, New York, 1960.
- “Heat Treating,” ASM Handbook, ASM International, Vol. 4, 1991.
- P. Sergeant, et al., “Thermal Analysis Magnetic Shields for Induction Heating,” IET Electric Power Applications, Vol. 3, No. 6, 2009, pp. 543-550.
- J. Acero, et al., “Domestic Induction Appliances,” IEEE Industry Applications Magazine, Vol. 16, No. 2, 2010, pp. 39-47.