Research ArticleOpen AccessGoogle Scholar indexed
Finite Element Based Analysis of Magnetic Forces between Planar Spiral Coils
- 1
- 2
- 3
- 4
Journal of Electromagnetic Analysis and Applications·Volume 02 (2010)·Pages 311–317·Published 2 June 2010·DOI10.4236/jemaa.2010.25040
Copy link · social · email
Abstract
This paper elaborates on the magnetic forces between current carrying planar spiral coils. Direct and concentric rings methods are employed in order to calculate the magnetic force between these coils. The results obtained by two calculation methods show the efficiency of the replaced rings method in both simplicity and calculation time. Simula-tions using the Finite Element Method (FEM) are carried out to analyze the distribution of the magnetic flux density around the coils. Also, coils with precise size have been constructed and tested. The experimental results as well as the results obtained by FEM are used to validate the accuracy of the calculations.
KeywordsMagnetic ForceFinite Element MethodConcentric Rings MethodPlanar Spiral Coils
- X. Ding, K. Kuribayashi and T. Hashida, “Development of a New Type Tactile Sensor Using Micro Electromagnetic Coil for Human Robot,” IEEE International Symposium on Micromechatronics and Human Science, Nagoya Congress Center, 2000, pp. 181-187.
- S. Atluri and M. Ghovanloo, “A Wideband Power-Efficient Inductive Wireless Link for Implantable Microelectronic Devices Using Multiple Carriers,” IEEE International Symposium On Circuits and Systems, Island of KAS, 2006, pp. 1131-1134.
- K. Kawabe, H. Koyama and K. Shirae, “Planar Inductor,” IEEE Transactions on Magnetics, Vol. 20, No. 20, 1984, pp. 1804-1811.
- T. Sato, M. Hasegawa, T. Mizogochi and M. Sahashi, “Study of High Power Planar Inductor,” IEEE Transactions on Magnetics, Vol. 27, No. 6, 1991, pp. 5277-5279.
- Y. Fukuda, T. Inoue, T. Mizoguchi, S. Yatabe and Y. Tachi, “Planar Inductor with Ferrite Layers for DC-DC Converter,” IEEE Transactions on Magnetics, Vol. 39, No. 4, 2003, pp. 2057-2061.
- I. Sasada, T. Yamaguchi, K. Harada and Y. Notohara, “Planar Inductors Using NiZn Ferrite Thin Plates and the Application to High-Frequency DC-DC Converters,” IEEE Transactions on Magnetics, Vol. 29, No. 6, 1993, pp. 3231-3233.
- I. Kawase, T. Sato, K. Yamasawa and Y. Miura, “A Planar Inductor Using Mn-Zn Ferrite/Polyimide Composite Thick Film for Low-Voltage and Large-Current DC-DC Converter,” IEEE Transactions on Magnetics, Vol. 41, No. 10, 2005, pp. 3991-3993.
- A. Meriched, M. Feliachi and H. Mohellebi, “Electromagnetic Forming of Thin Metal Sheets,” IEEE Transactions on Magnetics, Vol. 36, No. 4, 2000, pp. 1808-1811.
- A. Shiri , M. R. A. Pahlavani and A. Shoulaie, “A New and Fast Procedure for Calculation of the Magnetic Forces between Cylindrical Coils,” International Review of Electrical Engineering, Vol. 4, No. 5, 2009, pp. 1053- 1060.
- A. Shiri and A. Shoulaie, “New Results in Calculation of Magnetic Forces between Cylindrical Coils,” 23nd International Power System Conference, Tehran, 2008.
- A. Shiri and A. Shoulaie, “A New Methodology for Magnetic Force Calculations between Planar Spiral Coils,” Progress in Electromagnetics Research, Vol. 95, 2009, pp. 39-57.
- D. K. Cheng, “Field and Wave Electromagnetics,” 2nd Edition, Addison Wesley, 1989.
- A. Shiri, “Calculation of magnetic forces between current carrying coils in two plates,” Master of Science Thesis, Iran University of Science & Technology, 2006.