Elevated Ferrite Film Circulator with Different Permittivities for Layers: An Analytical Expression for the Input Conductance Employing Perturbation Method
- 1
- 2
Abstract
The main idea of this paper is to find an analytical formula for the input conductance of an elevated ferrite film circu-lator to match it systematically to the desired matching network. For solving the ferrite loaded dielectric resonator included in stripline elevated ferrite film circulator, the off diagonal components of the permeability tensor are taken as the perturbation. The electromagnetic fields computations are done for unperturbed structure. The dipolar resonant frequencies corresponding to harmonics of the resonant modes are then calculated using the perturbation integrals. The quality factor of the circulator is derived in terms of these dipolar resonant frequencies. Energy integrals are calculated to find the energy stored in the ferrite and dielectic layers. An analytical expression for the input conductance of the elevated ferrite film circulators is derived by using the quality factor and energy integrals. In this expression the ferrite and dielectric layers can have different permittivities. Some discussions about the effect of ferrite film thickness and permittivity mismatch on the bandwidth of the circulator are investigated by HFSS commercial software.
- H. C. Wu and W. B. Dou, “Field Structures of Waveguide Junction Circulators with Irregular Shaped Ferrite Simu-lated Based on Exact Treatment,” Progress in Electro-magnetics Research, Vol. 57, 2006, pp. 33-54.
- J. Helszajn, “Reflection Angles of In-Phase and Split Counter-Rotating Eigenvalues of the Three-Port Circula-tor,” IEEE Transactions on Microwave Theory and Tech-niques, Vol. 54, No. 3, March 2006, pp. 1076-1083.
- E. Benevent, T. Rouiller, B. Sauviac, V. Larrey, D. Vin-cent and A. Madelaine, “Stripline Y-Junction Circulator Using Barium Hexagonal Ferrite Thin Films,” IEEE In-ternational Symposium on Industrial Electronics, Vol. 1, No. 1, May 2004, pp. 15-18.
- J. L. Young and J. W. Sterbentz, “The Circular Homoge-neous-Ferrite Microwave Circulator—An Asypmtotic Green’s Function and Impedance Analysis,” IEEE Tran- sactions on Microwave Theory and Techniques, Vol. 51, No. 8, August 2003, pp. 1939-1945.
- P. Shi, H. How, X. Zuo, S. A. Oliver, N. E. McGruer and C. Vittoria, “MMW Monolithic Y-Junction Circulator on Single-Crystal Sc-Doped Ba-Hexaferrite,” IEEE MTT-S International Microwave Symposium Digest, Boston, Vol. 2, 2000, pp. 909-912.
- J. D. Adam, L. E. Davis, G. F. Dionne, E. F. Schloemann, and S. N. Stitzer, “Ferrite Devices and Materials,” IEEE Transactions on Microwave Theory and Techniques, Vol. 50, No. 3, March 2002, pp. 721-737.
- R. E. Blight and E. Schloemann, “A Compact Broadband Microstrip Circulator for Phased Array Antenna Mod-ules,” IEEE MTT-S International Microwave Symposium Digest, Albuquerque, Vol. 3, June 1992, pp.1389-1392.
- S. L. Karode and V. F. Fusco, “Feedforward Embedding Circulator Enhancement in Transmit/Receive Applica-tions,” IEEE Microwave and Guided Wave Letters, Vol. 8, No. 1, January 1998, pp. 33-34.
- H. Bosma, “On Strip Line Y-Circuation at UHF,” IEEE Transactions on Microwave Theory and Techniques, Vol. 12, No. 1, January 1964, pp. 61-72.
- C. E. Fay, and R. L. Comstock, “Operation of the Ferrite Junction Circulator,” IEEE Transactions on Microwave Theory and Techniques, Vol. 13, No. 1, January 1965, pp. 15-27.
- H. J. Butterweck, “Der Y Zirkulator,” Arch. Elektron. Uebertragung., Vol. 17, April 1963, pp. 163-176.
- H. How, S.W. McKnight and C. Vittoria, “Effective-Field Theory for Ferrite Thin-Film Junction Circulator,” IEEE MTT-S International Microwave Symposium Digest, Denver, Vol. 2, June 1997, pp. 1127-1130.