Scaling Relationships for Input Energy in Electromagnetic Welding of Similar and Dissimilar Metals
- 1
- 2
- 3
- 4
- 5
Abstract
In Electromagnetic Welding (EMW) process, the capacitive energy is the source of input energy. The tool that is used for welding comprises of an electromagnetic coil. The job piece to be welded is placed in close proximity with the coil. The welding is achieved by impact, when the colliding job pieces are accelerated towards each other by the Lorentz force. The electromagnetic and mechanical properties/ parameters of the equipment, tool and the job govern the overall welding process. We have described a procedure to calculate the capacitive input energies for jobs of different sizes. Data is given for welding of strips of aluminium, copper and S.S. in similar and dissimilar combinations. Since the EMW technique is used in limited applications, this type of data is not available. We have validated our model with some data available in the literature. It is hoped that, this information will help the designer, to select and standardize the system and process parameters.
- S. Kumar, S. V. Desai, M. R. Kulkarni and D. P. Chakra-varthy, “Development of Electro-Magnetic Welding Technique for Similar and Dissimilar Metal Strips,” Na-tional Welding Seminar-2008, Mumbai.
- S. Kumar, S. V. Desai, M. R. Kulkarni and D. P. Chakra-varthy, “Electro-Magnetic Welding of Copper to Stainless Steel,” National Welding Seminar-2009, Kolkata.
- S. T. S. Al Hassani, J. L. Duncan and W. Johnson, “On the Parameters of the Magnetic Forming Process,” Journal of Mechanical Engineering Science, Vol. 16, No. 1, pp.1-9.
- S. T. S. Al Hassani, J. L. Duncan and W. Johnson, “The Influence of the Electrical and Geometrical Parameters in Magnetic Forming,” Proceedings of the 8th International MTDR conference, Manchester, UK, September 1967.
- K. Baines, J. L. Duncan and W. Johnson, “Electromagnetic Metal Forming,” Proceedings I. Mech. E, 180 (Pt. 1) 1965-6 4, 93.
- S. T. S. Al Hassani, J. L. Duncan and W. Johnson, “Analysis of the Electromagnetic Forming Process,” Pro-ceedings of C.I.R.P., ASTME conference U.S.A., Sept. 1967.
- G. K. Lal and M. J. Hillier, “The Electrodynamics of Electromagnetic Forming,” International Journal of Me-chanical Science, Vol. 10, No. 6, 1968, pp. 491-500.
- G. K. Lal, “Electromagnetic Metal Forming,” IEEE transactions on Industrial applications, 1972, pp. 425-429.
- K. Feas, T. Baaten, W. D. Waele and N. Debroux, “Join-ing of Copper to Brass Using Magnetic Pulse Welding,” 4th International conference on high speed forming, 2010, pp. 84-96.
- V. Shribman, A. Stern, V. Livshitz and O. Gafri, “Mag-netic Pulse Welding Produces High Strength Aluminium Welds,” Welding Journal 81, 2002, pp 33-37.
- B. Artzy, A. Stern, N. Frage and V. Shribman, “Interface Phenomena in Aluminium-Magnesium Magnetic Pulse Welding,” Science and technology of welding and joining, Vol. 13, No. 4, 2008, pp. 402-408.
- S. V. Desai, S. Kumar, P. Satyamurthy, J. K. Chakravartty and D. P. Chakravarthy, “Analysis of the Effect of Colli-sion Velocity in Electromagnetic Welding Process of Aliminum Strips,” accepted for publication in International Journal of Electromagnetics and Mechanics in May 2010.
- T. Aizawa, K. Okagawa, M. Yoshizawa and N. Henmi, “Impulse Magnetic Pressure Seam Welding of Aluminium Sheets,” Impact engineering and applications, 2001, pp. 827-832.
- S. V. Desai, S. Kumar, P. Satyamurthy, J. K. Chakravartty and D. P. Chakravarthy, “Improvement of Performance of Electromagnetic Welding Process by Use of Driver Mate-rials,” accepted for publication in International Journal of Electromagnetics and Mechanics in 2010.