Research ArticleOpen AccessGoogle Scholar indexed
Finite Element Methods Applied to the Tubular Linear Stepping Motor
Unité de Recherche en Automatique et Informatique Industrielle de l’Institut National des Sciences Appliquées et de Technologie, Tunis, Tunisie.
Unité de Recherche en Automatique et Informatique Industrielle de l’Institut National des Sciences Appliquées et de Technologie, Tunis, Tunisie.
- 1 Unité de Recherche en Automatique et Informatique Industrielle de l’Institut National des Sciences Appliquées et de Technologie, Tunis, Tunisie.
- 2 Unité de Recherche en Automatique et Informatique Industrielle de l’Institut National des Sciences Appliquées et de Technologie, Tunis, Tunisie.
Journal of Electromagnetic Analysis and Applications·Volume 05 (2013)·Pages 219–222·Published 20 May 2013·DOI10.4236/jemaa.2013.55035
Copy link · social · email
Abstract
In this paper proposes a Finite Element Methods analyzing applied to the linear tubular stepping actuator. The linear displacement is modeled by means of a layer of finite elements placed in the air gap. The design of the linear stepper motor for achieving a specific performance requires the choice of appropriate tooth geometry. The magnetic field of the actuator has been analyzed using the finite element method over a current-displacement variation. The magneto static field and electromagnetic force was introduced in order to predict before construction, the inductance values according to the displacement and the currents into the coils. The results were obtained for the magnetic flux density distribution and the electromagnetic force for different positions and current.
KeywordsFinite Element MethodsLinear Tubular Stepping ActuatorMesh Repartition
- D. Deás , P. Kuo-Peng, N. Sadowski, A. M. Oliveira, J. L. Roel and J. P. A. Bastos, “2-D FEM Modeling of the Tubular Linear Induction Motor Taking into Account the Movement,” IEEE Transactions on Magnetics, Vol. 38, No. 2, 2002, pp. 1165-1168. doi:10.1109/20.996298
- S. McFee and J. P. Webb and D. A. Lowther, “A Tunable Volume Integration Formulation for Force Calculation in Finite-Element Based Computational Magnetostatics,” IEEE Transactions on Magnetics, Vol. 24, No. 1, 1988, pp. 439-442. doi:10.1109/20.43951
- A. E. Santo, M. R A. Calado and C. M. P. Cabrita, “Dynamic Simulation of Electromagnetic Actuators Based on the Co-Energy Map,” The 16th IASTED International Conference on Applied Simulation and Modelling, Palma De Mallorca, 29-31 August 2007, pp. 509-514.
- M. R. A. Calado, A. E. Santo, S. J. P. S. Mariano and C. M. P. Cabrita, “Characterization of a New Linear Switched Reluctance Actuator,” International Conference on Power Engineering, Energy and Electrical Drives, Lisbon, 18-20 March 2009, pp. 315-320. doi:10.1109/POWERENG.2009.4915253
- A. E. V. do Espirito Santo, M. do R. Calado and C. M. P. Cabrita, “Design and Evaluation of a Linear Switched Reluctance Actuator for Positioning Tasks,” Turkish Journal of Electrical Engineering & Computer Sciences, Vol. 18, No. 6, 2010, pp. 925-942.
- D. S. B. Fonseca, T. J. B. Godinho and C. P. Cabrita, “Electromagnetic Characterization of a Linear Reluctance Actuator: A New Approach,” International Conference on Electrical Machines, Vilamoura, 6-9 September 2008, pp. 1-6. doi:10.1109/ICELMACH.2008.4800225
- J.-F. Llibre, N. Martinez, B. Nogarède and P. Leprince, “Linear Tubular Switched Reluctance Motor for Heart Assistance Circulatory Analytical and Finite Element Modeling,” 10th International Workshop on Electronics, Control, Measurement and Signals (ECMS), Liberec, 1-3 June 2011, pp. 1-6. doi:10.1109/IWECMS.2011.5952367
- A. Ben Amor, “Experimental Identification of a Linear Tubular Four Phase Stepping Motor,” 2002 IEEE International Conference on Systems, Man and Cybernetics, Vol. 5, 2002. doi:10.1109/ICSMC.2002.1176431
- P. Acarnley, “Stepping Motors a Guide to Theory and Practice,” 4th Edition, The Institution of Engineering and Technology, London, 2002.
- L. El Amraoui, “Use of Inverse Models Built for Accurate Microstepping of Linear Switched Reluctance Step Actuators,” IMACS Multiconference on “Computational Engineering in Systems Applications” (CESA), Beijing, 4-6 October 2006.