Analysis of Thermal Behavior of High Frequency Transformers Using Finite Element Method
- 1
- 2
Abstract
High frequency transformer is used in many applications among the Switch Mode Power Supply (SMPS), high voltage pulse power and etc can be mentioned. Regarding that the core of these transformers is often the ferrite core; their functions partly depend on this core characteristic. One of the characteristics of the ferrite core is thermal behavior that should be paid attention to because it affects the transformer function and causes heat generation. In this paper, a typical high frequency transformer with ferrite core is designed and simulated in ANSYS software. Temperature rise due to winding current (Joule-heat) is considered as heat generation source for thermal behavior analysis of the transformer. In this simulation, the temperature rise and heat distribution are studied and the effects of parameters such as flux density, winding loss value, using a fan to cool the winding and core and thermal conductivity are investigated.
- S. N. Talukdar and J. R. Bailey, “Hysteresis Models for System Studies,” IEEE Transactions on Power Apparatus and Systems, Vol. 95, No. 4, 1976, pp. 1429-1434.
- C. C. Wong, “A Dynamic Hysteresis Model,” IEEE Transactions on Magnetics, Vol. 24, No. 2, 1988, pp. 1966-1968.
- D. R. Bennion, H. D. Crane and D. Nitzan, “Digital Magnetic Logic,” McGraw-Hill, New York, 1969.
- F. Presiach, “On the Magnetic Aftereffect,” Zeitschrift für Physik, Vol. 94, 1935, pp. 227-302.
- R. D. Vecchio, “An Efficient Procedure for Modeling Complex Hysteresis Processes in Ferromagnetic Materials,” IEEE Transactions on Magnetics, Vol. 16, No. 5, 1980, pp. 809-811.
- D. L. Atherton, B. Szpunar and J. A. Szpunar, “A New Approach to Presiach Diagrams,” IEEE Transaction on Magnetics, vol. 23, No. 3, May 1987, pp. 1856-1865.
- B. Szpunar, D. Atherton and M. Schonbachler, “An Ex-tended Presiach Model for Hysteresis Processes,” IEEE Transactions on Magnetics, Vol. 23, No. 5, 1987, pp. 3199-3201.
- J. P. Vandelac and P. D. Ziogas, “A Novel Approach for Minimizing High Frequency Transformer Copper Losses,” IEEE Transaction on Power Electronics, Vol. 3, No. 2, 1988, pp. 266-277.
- B. Carsten. “High Frequency Conductor Losses in Switched Mode Magnetic,” in Proc. HFPC Con$ Ventura, CA: Intertec Communications Inc., May 1986.
- Power Conversion and Line Filter Applications.
- Design of low profile high frequency transformers-A new tool in SMPS design-. Philips Magnetic Products. Appli-cation note. May.1990.
- Kool Mu Powder Cores Data Book. Magnetics.
- L. M. Escribano, R. Prieto, J. A. Cobos and J. Uceda, Thermal Modeling of Magnetic Components: A Survey,” Proceeding of 28th Annual Industrial Electronics Society Conference of the IEEE, Sevilla, 5-8 November 2002, pp. 1336-1341.
- L. M. Escribano, R. Prieto, J. A. Oliver, J. A. Cobos and J. Uceda, “Analytical Thermal Model for Magnetic Com-ponents,” Proceedings of 34th Annual Power Electronics Specialist Conference of the IEEE, 2003, pp. 861-866.
- J. C. S. Fagundes, A. J. Batista and P. Viarouge, “Thermal Modeling of Pot Core Magnetic Components Used in High Frequency Static Converters,” IEEE Transactions on Magnetic, Vol. 33, No. 2, March 1997, pp. 1710-1713.
- R. W. Ericksonand D. Maksimo, “Fundamentals of Power Electronics,” 2nd Edition, Springer, Berlin, 2002.