Prediction of the Inductance in a Synchronous Linear Permanent Magnet Generator
- 1
- 2
- 3
Abstract
This paper presents calculations of the varying inductances profile for a synchronous linear surface mounted permanent magnet generator in an ABC reference system. Calculations are performed by utilizing the reluctance term, known from analytic calculations and finite element method simulations. With the inductance term identified, the voltage difference between the generator’s no load and load voltage can be calculated and an external circuit can be designed for optimal use of the generator. Two different operation intervals of the linear generator are considered and the results are discussed. The result indicates that time costly finite element simulations can be replaced with simple analytical calculations for a surface mounted permanent magnet linear generator.
- L. Szabó, C. Oprea, I.-A. Viorel and K. á. Biró, “Novel Permanent Magnet Tubular Linear Generator for Wave Energy Converters,” Electric Machines & Drives Conference, IEMDC, IEEE International, Antalya, 3-5 May 2007, pp. 983-987.
- A. F. De O. Falcao, “Wave Energy Utilization: A Review of the Technologies,” Renewable and Sustainable Energy Reviews, Vol. 14, No. 3, October 2009, pp. 899-918.
- M. Leijon, O. Danielsson, M. Eriksson, K. Thorburn, H. Bernhoff, J. Isberg, J. Sundberg, I. Ivanova, E. Sj?stedt, O. ?gren, K. E. Karlsspm and A. Wolfbrand, “An Electrical Approach to Wave Energy Conversion,” Renewable Energy, Vol. 31, No. 9, July 2006, pp. 1309-1319. doi:10.1016/j.renene.2005.07.009
- R. Escarela-Perez, E. Campero-Littlewood and A. L. Laureano-Cruces, “Steady-State Inductance Calculation of a Turbine Generator in the ABC Reference Frame,” International Conference on Electrical and Electronics Engineering, Mexico City, 5-7 September 2007, pp. 233- 236.
- F. Wu, X-P. Zhang, P. Ju and M. J. H. Sterling, “Modeling and Control of AWS-Based Wave Energy Conversion System Integrated Into Power Grid,” IEEE Transactions on Power System, Vol. 23, No. 3, August 2008, pp. 1196- 1204.
- K. Nilsson, O. Danielsson, and M. Leijon, “Electromagnetic Forces in the Air Gap of a Permanent Magnet Linear Generator at No Load,” Journal of Applied Physics, Vol. 99, No. 3, 2 006, pp. 034505-034505-5.
- B. Bolund, “Electric Power Generation and Storage Using a High Voltage Approach,” Ph.D. Dissertation, Acta Universitatis Upsaliensis, Uppsala, 2006.
- S.J. Salon, “Finite Element Analysis of Electric Machinery,” IEEE Computer Applications in Power, Vol. 3, No. 2, 1990, pp. 29-32. doi:10.1109/67.53227
- S. R. Shaudhry, S. Ahmed-Zaid and N. A. Demerdash, “Coupled Finite-Element/State Space Modeling of Turbogenerators in the ABC Frame of Reference—The No Load Case,” IEEE Transactions on Energy Conversion, Vol. 10, No. 1, March 1995, pp. 56-62.
- T. W. Nehl, F. A. Fouad, N. A. Demerdash, “Determination of Saturated Values of Rotating Machinery Incremental and Apparent Inductance by an Energy Perturbation Method,” IEEE Transactions on Power Apparatus and System, Vol. PAS-101, No. 12, December 1982, pp. 4441-4451.