Research ArticleOpen AccessGoogle Scholar indexed
Investigation of Electromagnetic Shielding Effectiveness of Nanostructural Carbon Black/ABS Composites
- 1
Journal of Electromagnetic Analysis and Applications·Volume 03 (2011)·Pages 160–164·Published 23 May 2011·DOI10.4236/jemaa.2011.35026
Copy link · social · email
Abstract
With the increasing application in electromagnetic interference shielding field of high polymer materials, there is an increasing interest in investigating of high polymer composites. The effects of carbon black fraction on volume resistivity and electromagnetic shielding effectiveness (SE) of nanostructural carbon black (CB)/Acrylonitrile Butadiene Styrene (ABS) composites were studied. The results indicated that when CB mass fraction was over 15%, the volume resistivity dropped sharply and when it rose to 35%, the volume resistivity achieved the lowest value 103 Ω?cm and the SE was about 6 dB. In addition, there are two obvious percolation effect at 15% ~ 20% and 30% ~ 35% CB respectively in the course of the volume resistivity changing.
KeywordsElectrical ConductivityTwo Percolation EffectShielding Effectiveness
- Y. P. Duan, S. H. Liu and H. T. Guan, “Investigation of Electrical Conductivity and Electromagnetic Shielding Effectiveness of Polyaniline Composite,” Science and Technology of Advanced Materials, Vol. 6, No. 5, 2005, pp. 513-518. doi:10.1016/j.stam.2005.01.002
- N. C. Das, D. Khastgir, T. K. Chaki and A. Chakraborty, “Electromagnetic Interference Shielding Effectiveness of Carbon Black and Carbon Fiber Filled EVA and NR Based Composites,” Composites Part A: Applied Science and Manufacturing, Vol. 31, No. 10, 2000, pp. 1069-1081. doi:10.1016/S1359-835X(00)00064-6
- C. J. Klemperer and D. Maharaj, “Composite Electromagnetic Interference Shielding Materials for Aerospace Applications,” Composite Structures, Vol. 91, No. 4, 2009, pp. 467-472. doi:10.1016/j.compstruct.2009.04.013
- W. Gong and L. Zeng, “Progress of Polymer Matrix Conductive Composites,” New Chemical Materials, Vol. 30, No. 4, 2002, pp. 38-41.
- W. Zhou, “Plastic Measuring and Testing Technique,” Chemical Industry Press, Beijing, 1997.
- J. Guo, “Chemical Industry Cyclopaedia,” Chemical Industry Press, Beijing, 1996, pp. 699-719.
- H. Li, Y. Pan and Y. He, “Explanation of Two Phenomena on Conductive Composite Materials,” Natural Science Journal of Xiangtan University, Vol. 18, No. 4, 1996, pp. 34-36.
- P. Li, S. Liu and G. Chen, “Investigation on Linear Resistance Characteristic of Electromagnetic Shielding Rubber,” Special Purpose Rubber Products, Vol. 26, No. 1, 2005, pp. 12-15.
- P. Li and S. Liu, “Study on Shielding Effectiveness of RTV Silicone Rubber Filled with Carbon Black,” Journal of Functional Polymers, Vol. 18, No. 2, 2005, pp. 227-231.
- P. Li, S. Liu and G. Chen, “Influence of Double-Percola- tion Phenomenon on Shielding Effectiveness of Ni-Based Conductive Silicone Rubber,” Acta Physica Sinica, Vol. 54, No. 7, 2005, pp. 3332-3336.
- F. Ge, J. Zhu Jing and L. Chen, “Effects of Inclusion Shape on Absorbing Ablity of Microwave Absorbing Materials,” ACTA Electronic Sinica, Vol. 24, No. 6, 1996, pp. 82-86.