Research on Non-Contact Weak Current Detection Technology
- 1 College of Foreign Languages, Southwest Petroleum University, Chengdu, China
- 2 College of Mechanical and Electronic Engineering, Southwest Petroleum University, Chengdu, China
- 3 College of Mechanical and Electronic Engineering, Southwest Petroleum University, Chengdu, China
- 4 College of Mechanical and Electronic Engineering, Southwest Petroleum University, Chengdu, China
- 5 College of Mechanical and Electronic Engineering, Southwest Petroleum University, Chengdu, China
- 6 College of Electric and Information, Southwest Petroleum University, Chengdu, China
- 7 College of Mechanical and Electronic Engineering, Southwest Petroleum University, Chengdu, China
Abstract
With the continuous development of industrial technology, the weak current plays an increasingly important role in all fields of life. In order to facilitate the user to carry, the study of contactless weak current measurement technology is also emerging. This article’s design idea is based on two-dimensional reluctance sensor device built non-contact weak current detection system. The system uses the reluctance sensor HMC1002 to collect the current signal and the temperature sensor DS18B20 to compensate the temperature. The signals collected by the reluctance sensor and the temperature sensor are extremely weak. After being amplified by the amplifying circuit, the signal is conducive to subsequent detection and processing. Filter circuit can filter out interference signals to achieve the goal of improving accuracy. After the corresponding algorithm of the microcontroller will convert the signal voltage, easy to read and store, thus designing a non-contact current measurement capable of detecting weak currents and achieving higher accuracy.
- Blazek, V. (2016) Ambient and Unobtrusive Cardiorespiratory Monitoring. 2016 ELEKTRO, Slovakia, 16-18 May 2016, 2. https://doi.org/10.1109/ELEKTRO.2016.7512022
- Texas Instruments (2001) TMS320F28x Optimizing C&C++ Compiler User’s Guide. Dallas.
- Texas Instruments (2003) TMS320F28x Analog to Digital Converter (ADC) Reference Guide. Dallas.
- Bratland, T. and Bilking, R. (2002) Selection and Application of Magnetic Sensors. Instruments and Sensors, 11, 18-21.
- Chase, C.R., Van Bibber, S. and Muniz, T.P. (2005) Development of a Noncontact Oil Spill Detection System. OCEANS, 2005. Proceedings of MTS/IEEE, Washington DC, 17-23 September 2005, 1352-1357.
- Cao, C.Z. and Wei, G.H. (2004) Optimization Design of Fuzzy Neural Network Controller in Direct Torque Control System. Proceedings of 2004 International Conference on Machine Learning and Cybernetics, Shanghai, 26-29 August 2004, 378-382.
- Yao, C.G., Wu, H., Mi, Y., Ma, Y., Shen, Y. and Wang, L. (2013) Finite Difference Time Domain Simulation of Lightning Transient Electromagnetic Fields on Transmission Lines. IEEE Transactions on Dielectrics and Electrical Insulation, 20, 1239-1246.
- Zhao, J., Gao, B., Woo, W.L., Qiu, F.S. and Tian, G.Y. (2017) Crack Evaluation Basedon Novel Circle-Ferrite Induction Thermography. IEEE Sensors Journal, 17, 5637-5645.
- Kiltz, S., Hildebrandt, M., Dittmann, J. and Vielhauer, C. (2012) Challenges in Contact-Less Latent Fingerprint Processing in Crime Scenes: Review of Sensors and Image Processing Investigations. 2012 Proceedings of the 20th European Signal Processing Conference (EUSIPCO), Bucharest, 27-31 August 2012, 1504-1508.
- Liu, P., Xiang, Huang, X. and Liu, F. (2006) From Simple to Smart: The Development of Sensor Network. Rare Metals and Engineering, 35, 617-620.
- Texas Instruments (2003) TMS320F2812 Digital Signal Processors. Dallas.
- Dumitru-Daniel, H.C. and Corodeanu, H.S. (2007) Magneto-Impedance Sensor for Biomedical Applications. Journal of Magnetism and Magnetic Materials, 1, 68-71.
- Li, L.J., Yuan, Y.S. and Feng, T.Z. (2006) Weak Signal Detection Based on Stochastic Resonance. Journal of Communications Technology and Electronics.
- Asai, T., Motoki,T, Gao, W., Ju, B.-F., et al. (2007) An AFM-Based Edge Profile Measuring Instrument of Diamond Cutting Tools. International Journal of Precision Engineering and Manufacturing.